Wengui Li 
- (2024): Compressive performance and damage mechanism of concrete short columns confined by steel wires reinforced 3DPM. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Effects of aggregate's type and orientation on stress concentration and crack propagation of modeled concrete applied a shear force. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Dynamic performance of fiber-reinforced ultra-high toughness cementitious composites: A comprehensive review from materials to structural applications. In: Engineering Structures, v. 317 (October 2024).
- (2024): Concrete 3D printing technology for sustainable construction: A review on raw material, concrete type and performance. In: Developments in the Built Environment, v. 17 (March 2024).
- (2024): Anti-cracking and shrinkage performance of sustainable concrete incorporating high-volume natural pozzolans: A case design for high-speed railway concrete slab tracks. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Effect of raw materials on the performance of 3D printing geopolymer: A review. In: Journal of Building Engineering, v. 84 (May 2024).
- (2023): A comprehensive review on self-healing cementitious composites with crystalline admixtures: Design, performance and application. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Carbonation resistance of calcined clay-ground granulated blast furnace slag alkali-activated mortar. In: Construction and Building Materials, v. 393 (August 2023).
- (2020): Applying grid nanoindentation and maximum likelihood estimation for N-A-S-H gel in geopolymer paste: Investigation and discussion. In: Cement and Concrete Research, v. 135 (September 2020).
- (2021): Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent. In: Cement and Concrete Research, v. 139 (January 2021).
- (2021): Comparison on the properties of ITZs in fly ash-based geopolymer and Portland cement concretes with equivalent flowability. In: Cement and Concrete Research, v. 143 (May 2021).
- (2022): Comparative Analysis On International Construction and Demolition Waste Management Policies and Laws for Policy Makers In China. In: Journal of Civil Engineering and Management, v. 29, n. 2 (20 December 2022).
- (2022): Application of intrinsic self-sensing cement-based sensor for traffic detection of human motion and vehicle speed. In: Construction and Building Materials, v. 355 (November 2022).
- (2022): Degradation prediction of recycled aggregate concrete under sulphate wetting–drying cycles using BP neural network. In: Structures, v. 46 (December 2022).
- (2022): Deterioration of concrete under coupled aggressive actions associated with load, temperature and chemical attacks: A comprehensive review. In: Construction and Building Materials, v. 322 (March 2022).
- (2022): Chloride-binding capacity of cement-GGBFS-nanosilica composites under seawater chloride-rich environment. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): A comprehensive review on self-sensing graphene/cementitious composites: A pathway toward next-generation smart concrete. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): A critical review on phase change materials (PCM) for sustainable and energy efficient building: Design, characteristic, performance and application. In: Energy and Buildings, v. 260 (April 2022).
- (2022): Autogenous and total shrinkage of limestone calcined clay cement (LC3) concretes. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Effect of chloride-induced corrosion on the bond behaviors between steel strands and concrete. In: Materials and Structures, v. 54, n. 3 (16 April 2021).
- (2020): Effect of microlimestone on properties of self-consolidating concrete with manufactured sand and mineral admixture. In: Frontiers of Structural and Civil Engineering, v. 14, n. 6 (August 2020).
- (2021): Durability deterioration of concrete under marine environment from material to structure: A critical review. In: Journal of Building Engineering, v. 35 (March 2021).
- (2016): Behavior of glass and carbon FRP tube encased recycled aggregate concrete with recycled clay brick aggregate. In: Composite Structures, v. 155 (November 2016).
- (2020): Effect of incompatibility between healing agent and cement matrix on self-healing performance of intelligent cementitious composite. In: Smart Materials and Structures, v. 29, n. 11 (September 2020).
- (2018): Durability of recycled aggregate concrete under coupling mechanical loading and freeze-thaw cycle in salt-solution. In: Construction and Building Materials, v. 163 (February 2018).
- (2017): Early-age shrinkage development of ultra-high-performance concrete under heat curing treatment. In: Construction and Building Materials, v. 131 (January 2017).
- (2017): Development of novel ultra-high performance concrete: From material to structure. In: Construction and Building Materials, v. 135 (March 2017).
- (2016): Comparative investigation on nanomechanical properties of hardened cement paste. In: Materials and Structures, v. 49, n. 5 (May 2016).
- (2018): Effect of Cyclic Loading Deterioration on Concrete Durability: Water Absorption, Freeze-Thaw, and Carbonation. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 9 (September 2018).
- (2018): Development of High-Performance Self-Compacting Concrete Applied as the Filling Layer of High-Speed Railway. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 2 (February 2018).
Structurae cooperates with
