Wei Li 
- (2024): Defect induced fatigue failure behavior and life assessment of laser powder bed fused Al-Si alloy under different building directions. In: Engineering Failure Analysis, v. 156 (February 2024).
- (2019): Behaviour of ultra-high strength steel hollow tubes subjected to low velocity lateral impact: Experiment and finite element analysis. In: Thin-Walled Structures, v. 134 (January 2019).
- (2017): Behaviour of grout-filled double skin steel tubes under compression and bending: Experiments. In: Thin-Walled Structures, v. 116 (July 2017).
- (2019): Behaviour of grout-filled double-skin steel tubular T-joint subjected to low-velocity impact. In: Thin-Walled Structures, v. 144 (November 2019).
- (2023): Cyclic tests and finite element analysis on hybrid fiber–cement-based composite encased CFST columns. In: Structures, v. 58 (December 2023).
- (2023): Characterization of permeability of seawater iron tailings mortar based on inter-pore connection. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Comprehensive and quantitative evaluation for selecting a suitable scheme of central air-conditioning during the design phase. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Bleeding mechanism and mitigation technique of basalt fiber-reinforced asphalt mixture. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): A coarse aggregate gradation detection method based on 3D point cloud. In: Construction and Building Materials, v. 377 (May 2023).
- (2022): CFD simulation of wind and thermal-induced ventilation flow of a roof cavity. In: Building Simulation, v. 15, n. 9 (February 2022).
- (2022): Compressive performance of steel-timber composite L-shaped columns under concentric loading. In: Journal of Building Engineering, v. 48 (May 2022).
- (2022): Comparison study of thermal comfort and energy saving under eight different ventilation modes for space heating. In: Building Simulation, v. 15, n. 7 (18 February 2022).
- (2021): Change in fresh properties of high-strength concrete due to pumping. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): Crack Grid Detection and Calculation Based on Convolutional Neural Network. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 48, n. 9 (September 2021).
- (2020): Bending of nonconforming thin plates based on the first-order manifold method. In: Journal of Mechanics of Materials and Structures, v. 15, n. 3 (July 2020).
- (2021): Bi‐objective mountain railway alignment optimization incorporating seismic risk assessment. In: Computer-Aided Civil and Infrastructure Engineering, v. 36, n. 2 (June 2021).
- (2020): Deformation analysis of geosynthetic-encased stone column-supported embankments using cavity expansion model. In: European Journal of Environmental and Civil Engineering, v. 26, n. 7 (July 2020).
- (2020): Behaviour of high-strength CFDST chord to CHS brace T-joint: Experiment. In: Engineering Structures, v. 219 (September 2020).
- (2020): CrackU-net: A novel deep convolutional neural network for pixelwise pavement crack detection. In: Structural Control and Health Monitoring, v. 27, n. 8 (7 July 2020).
- (2021): Behaviour of concrete-filled steel tubes with concrete imperfection under axial tension. In: Magazine of Concrete Research, v. 73, n. 14 (July 2021).
- (2018): Bond properties between FRP bars and coral concrete under seawater conditions at 30, 60, and 80 °C. In: Construction and Building Materials, v. 162 (February 2018).
- (2012): Behaviour of tapered concrete-filled double skin steel tubular (CFDST) stub columns. In: Thin-Walled Structures, v. 57 (August 2012).
- (2019): Cyclic behavior of reinforced concrete columns confined with two layers of stirrups. In: Structural Concrete, v. 20, n. 4 (August 2019).
- (2019): A coupled FE-meshfree method for Helmholtz problems using point interpolation shape functions and edge-based gradient smoothing technique. In: Computers & Structures, v. 213 (March 2019).
- (2019): Chloride-induced stray current corrosion of Q235A steel and prediction model. In: Construction and Building Materials, v. 219 (September 2019).
- (2018): Behaviour of concrete-encased CFST stub columns subjected to long-term sustained loading. In: Journal of Constructional Steel Research, v. 151 (December 2018).
- (2014): Characteristics of Asphalt Binders Foamed in the Laboratory to Produce Warm Mix Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 11 (November 2014).
- (2016): Cyclic and Postcyclic Triaxial Testing of Ballast and Subballast. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 7 (July 2016).
- (2019): Chloride permeability of concrete mixed with activity recycled powder obtained from C&D waste. In: Construction and Building Materials, v. 199 (February 2019).
- (2017): Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag. In: Construction and Building Materials, v. 134 (March 2017).
Structurae cooperates with
