Tao Li 
- (2024): An interpretable graph convolutional neural network based fault diagnosis method for building energy systems. In: Building Simulation, v. 17, n. 7 (27 June 2024).
- (2024): Improvement of strength and microstructure of low-carbon cementitious materials with high volume of calcined coal gangue. In: Construction and Building Materials, v. 444 (September 2024).
- (2024): Hysteretic performance of novel grouted steel beam-column corner-connections for modular integrated construction. In: Journal of Constructional Steel Research, v. 220 (September 2024).
- (2024): Influence of wood species and natural aging on the mechanics properties and microstructure of wood. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Load-bearing tests and simulation analysis of compacted loose snow. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Influencing Factors and Critical Paths of Virtual Reality Adoption by AEC Enterprises Based on TOE-SNA. In: Journal of Construction Engineering and Management, v. 150, n. 2 (February 2024).
- (2024): In-service performance assessment of fire-corrosion damaged cables of bridges. In: Engineering Structures, v. 300 (February 2024).
- (2024): An improved transfer learning strategy for short_term cross-building energy prediction using data incremental. In: Building Simulation, v. 17, n. 1 (January 2024).
- (2023): Impact of ground motion duration on seismic performance of buckling restrained braced frames. In: Soil Dynamics and Earthquake Engineering, v. 174 (November 2023).
- (2023): Interpretation and explanation of convolutional neural network-based fault diagnosis model at the feature-level for building energy systems. In: Energy and Buildings, v. 295 (September 2023).
- (2023): Hysteresis behavior of EQ56 high strength steel: Experimental tests and FE simulation. In: Journal of Constructional Steel Research, v. 201 (February 2023).
- (2023): An information model for highway operational risk management based on the IFC-Brick schema. In: International Journal of Transportation Science and Technology, v. 12, n. 3 (September 2023).
- (2023): Influence of Segmented Linings on the Micro-Pressure Wave of Tunnels. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2022): Hysteretic behavior of high damping rubber bearings under multiaxial excitation. In: Soil Dynamics and Earthquake Engineering, v. 163 (December 2022).
- (2023): Flexural behavior of steel-MPC based high performance concrete composite beams subjected to hogging moments. In: Engineering Structures, v. 276 (February 2023).
- (2023): A generalized model of lead rubber bearing considering large strain stiffening and degradation. In: Engineering Structures, v. 275 (January 2023).
- (2022): Influence of curing conditions on mechanical properties and microstructure of magnesium potassium phosphate cement. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Influence of ground motion duration on seismic performance of RC frame isolated by high damping rubber bearings. In: Engineering Structures, v. 262 (July 2022).
- (2021): Investigations on Creep Behavior and Fractal Derivative Constitutive Model of Sandstone under Different Drying-Wetting Cycles. In: KSCE Journal of Civil Engineering, v. 26, n. 1 (19 December 2021).
- (2021): An improved continuum model for determining the behavior of suspension bridges during construction. In: Automation in Construction, v. 127 (July 2021).
- (2020): Markov-Based Time Series Modeling Framework for Traffic-Network State Prediction under Various External Conditions. In: Journal of Transportation Engineering, Part A: Systems, v. 146, n. 6 (June 2020).
- (2021): Influence of roller-related factors on compaction meter value and its prediction utilizing artificial neural network. In: Construction and Building Materials, v. 268 (January 2021).
- (2020): Influences of low fines content and fines mixing ratio on the undrained static shear strength of sand–silt–clay mixtures. In: European Journal of Environmental and Civil Engineering, v. 26, n. 9 (December 2020).
- (2019): An iterative calculation method for hanger tensions and the cable shape of a suspension bridge based on the catenary theory and finite element method. In: Advances in Structural Engineering, v. 22, n. 4 (February 2019).
- (2011): Hysteretic behaviour of square tubular T-joints with chord reinforcement under axial cyclic loading. In: Journal of Constructional Steel Research, v. 67, n. 1 (January 2011).
- (2017): Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 143, n. 5 (September 2017).
- (2017): Flexural behavior and microstructure of hybrid basalt textile and steel fiber reinforced alkali-activated slag panels exposed to elevated temperatures. In: Construction and Building Materials, v. 152 (October 2017).
- (2014): Investigation and evaluation of increasing uplift pressure in an arch dam: A case study of the Huaguangtan Dam. In: KSCE Journal of Civil Engineering, v. 18, n. 6 (August 2014).
- (1999): Local structural modification using mass and stiffness changes. In: Engineering Structures, v. 21, n. 11 (November 1999).
- (1998): A large arch bridge using concrete filled steel tubular. Presented at: IABSE Symposium: Long-Span and High-Rise Structures, Kobe, Japan, September 1998.
Structurae cooperates with
