Shengli Li 
- : Parameter Tuning and Positioning Strategy of VD and TMD Joint Control System for Multi-Modal Vibration of Stay Cables. In: International Journal of Structural Stability and Dynamics.
- : Comparison study of the location-related damage sensitivity and structural damage index with sensitivity enhancement for beam structure. In: International Journal of Structural Stability and Dynamics.
- (2024): Complex Background Removal Method for Video of an Inclined Cable Based on UAV Detection of Structural Vibration Frequencies. In: Structural Control and Health Monitoring, v. 2024 (January 2024).
- (2023): Damage evaluation of UHPC-GFRP hybrid beams based on acoustic emission technology under bending experiment. In: Structures, v. 56 (October 2023).
- (2023): Effect of outer rust layer on cathodic protection and corrosion behavior of high-strength wire hangers with sheath crack in marine rainfall environment. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Seismic performance of precast shear wall of insufficient grouting material strength strengthened with steel plate. In: Structures, v. 45 (November 2022).
- (2022): Quantitative damage analysis of brick masonry under uniaxial compression and shear using acoustic emission technology. In: Structural Control and Health Monitoring, v. 29, n. 12 (5 October 2022).
- (2022): Investigation of wave propagation path and damage source 3D localization in parallel steel wire bundle. In: Structural Control and Health Monitoring, v. 29, n. 10 (13 September 2022).
- (2023): Uncertainty quantification of structural flexibility identified from input–output measurement data for reliability analysis. In: Computer-Aided Civil and Infrastructure Engineering, v. 38, n. 13 (May 2023).
- (2022): Effect of grouting material strength on bond strength of sleeve and acoustic emission characterization of bond failure damage process. In: Construction and Building Materials, v. 324 (March 2022).
- (2021): Characteristic analysis of acoustic emission monitoring parameters for crack propagation in UHPC-NC composite beam under bending test. In: Construction and Building Materials, v. 278 (April 2021).
- (2022): Analysis of acoustic emission parameters of steel plate reinforcement effect on shearing zone of ECC-NC composite beams. In: Engineering Structures, v. 266 (September 2022).
- (2022): Corrosion evaluation of prestressed high‐strength steel wires with impressed current cathodic protection based on acoustic emission technique. In: Structural Control and Health Monitoring, v. 29, n. 5 (3 April 2022).
- (2022): Simulation of wind profile in coastal areas by using a structural wind-resistant moving vehicle tester: CFD and experimental investigations. In: Journal of Building Engineering, v. 48 (May 2022).
- (2022): Effect of current density on the cathodic protection efficiency and mechanical properties of pre-stressed high-strength steel wires for stay cable. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Influence of grouted sleeve and concrete strength of fabricated shear wall on acoustic emission detection method for sleeve compactness. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Effect of cathodic protection current density on corrosion rate of high-strength steel wires for stay cable in simulated dynamic marine atmospheric rainwater. In: Structures, v. 29 (February 2021).
- (2021): Shear test on damage evolution of brick masonry based on acoustic emission technique. In: Construction and Building Materials, v. 273 (March 2021).
- (2020): Nondestructive testing of strength of sleeve grouting material in prefabricated structure based on surface hardness method. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Investigation on passive simulation method and factors influencing the type-C-terrain wind profile of a structural wind-resistant moving-vehicle tester. In: Journal of Building Engineering, v. 32 (November 2020).
- (2016): Galloping of steepled main cables in long-span suspension bridges during construction. In: Wind & Structures, v. 23, n. 6 (December 2016).
- (2019): Analysis of wind attack angle increments in wind tunnel tests for the aerodynamic coefficients of iced hangers. In: Advances in Structural Engineering, v. 23, n. 4 (October 2019).
- (2019): Investigation of the impressed current cathodic protection method for the cable parallel wires in the rainwater electrolyte based on acoustic emission method. In: Construction and Building Materials, v. 229 (December 2019).
- (2019): Effect of end plates on transiting test for measuring the aerodynamic coefficient of structures using wind generated by a moving vehicle. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 190 (July 2019).
- (2019): Effects of aerodynamic interference on the iced straddling hangers of suspension bridges by wind tunnel tests. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 184 (January 2019).
- (2017): Experimental and numerical studies on galloping of the flat-topped main cables for the long span suspension bridge during construction. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 163 (April 2017).
- (2019): A novel acoustic emission monitoring method of cross-section precise localization of defects and wire breaking of parallel wire bundle. In: Structural Control and Health Monitoring, v. 26, n. 4 (March 2019).
- (2019): Acoustic emission testing method for the sleeve grouting compactness of fabricated structure. In: Construction and Building Materials, v. 221 (October 2019).
- (2019): Damage monitoring of masonry structure under in-situ uniaxial compression test using acoustic emission parameters. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Characteristic analysis of acoustic emission signals of masonry specimens under uniaxial compression test. In: Construction and Building Materials, v. 196 (January 2019).
Structurae cooperates with
