Na Li 
- (2024): Damage characterization of CFRP /steel double-lap bonded joints based on AE and DIC. In: Composite Structures, v. 346 (October 2024).
- (2024): Compressive strength and microscopic mechanism of nanosilica modified recycled aggregate mortar. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Development of self-sensing engineered cementitious composite sensors for monitoring flexural performance of reinforced concrete beam. In: Developments in the Built Environment, v. 18 (April 2024).
- (2024): Effect of direct addition of asphalt rubber pellets on mixing, performance and VOCs of asphalt mixtures. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Dynamic mechanical properties and constitutive model establishment of QSTE420 steel. In: Journal of Constructional Steel Research, v. 213 (February 2024).
- (2024): Effect and Mechanism of Freeze–Thaw Cycles on Static and Dynamic Characteristics of Expandable Polystyrene Lightweight Soil. In: International Journal of Geomechanics, v. 24, n. 2 (February 2024).
- (2023): Adaptive model predictive control with ensembled multi-time scale deep-learning models for smart control of natural ventilation. In: Building and Environment, v. 242 (August 2023).
- (2023): Cumulative Deformation and Damage Evolution of Fiber Cement–Modified Iron Tailings under Cyclic Load. In: International Journal of Geomechanics, v. 23, n. 4 (April 2023).
- (2023): Active control experiments on a Levy cable dome. In: Engineering Structures, v. 278 (March 2023).
- (2023): Corroded reinforced concrete columns strengthened with basalt fibre reinforced ECC under axial compression. In: Composite Structures, v. 303 (January 2023).
- (2022): Analysis of the influence of the stay-at-home order on the electricity consumption in Chinese university dormitory buildings during the COVID-19 pandemic. In: Energy and Buildings, v. 277 (December 2022).
- (2022): Compressive behavior degradation of FRP-confined RC columns exposed to a chlorine environment. In: Marine Structures, v. 86 (November 2022).
- (2021): Energy generation and storing electrical energy in an energy hybrid system consisting of solar thermal collector, Stirling engine and thermoelectric generator. In: Sustainable Cities and Society, v. 75 (December 2021).
- (2016): Effect of the Adjustable Inner Secondary Air-Flaring Angle of Swirl Burner on Coal-Opposed Combustion. In: Journal of Energy Engineering, v. 142, n. 1 (March 2016).
- (2014): Application of modern timber structure in short and medium span bridges in China. In: Journal of Traffic and Transportation Engineering (English Edition), v. 1, n. 1 (February 2014).
- (2020): Axial compressive behaviour of steel fibre reinforced self-stressing and self-compacting concrete-filled steel tube columns. In: Engineering Structures, v. 222 (November 2020).
- (2020): Effect of equipment layout on bioaerosol temporal-spatial distribution and deposition in one BSL-3 laboratory. In: Building and Environment, v. 181 (August 2020).
- (2020): Estimating hourly average indoor PM2.5 using the random forest approach in two megacities, China. In: Building and Environment, v. 180 (August 2020).
- (2010): Correlation analysis of the wind of a cable-stayed bridge based on field monitoring. In: Wind & Structures, v. 13, n. 6 (November 2010).
- (2020): Experimental and numerical study of potential infection risks from exposure to bioaerosols in one BSL-3 laboratory. In: Building and Environment, v. 179 (July 2020).
- (2018): Bond behavior of steel fibers reinforced self-stressing and self-compacting concrete filled steel tube columns. In: Construction and Building Materials, v. 158 (January 2018).
- (2019): Estimation of PM2.5 infiltration factors and personal exposure factors in two megacities, China. In: Building and Environment, v. 149 (February 2019).
- (2018): Control behaviors and thermal comfort in a shared room with desk fans and adjustable thermostat. In: Building and Environment, v. 136 (May 2018).
- (2017): Effect of natural ventilation on indoor air quality and thermal comfort in dormitory during winter. In: Building and Environment, v. 125 (November 2017).
- (2019): Characterization of Short-Term Strength Properties of Fiber/Cement-Modified Slurry. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2015): Axial behavior of RC columns strengthened with SCC filled square steel tubes. In: Steel and Composite Structures, v. 18, n. 3 (March 2015).
- (2015): Eccentric strength and design of RC columns strengthened with SCC filled steel tubes. In: Steel and Composite Structures, v. 18, n. 4 (April 2015).
- (2015): Behavior of steel fiber reinforced concrete-filled steel tube columns under axial compression. In: Construction and Building Materials, v. 95 (October 2015).
- (2017): Evaluation of oil sludge as an alternative fuel in the production of Portland cement clinker. In: Construction and Building Materials, v. 152 (October 2017).
- (2018): Axial Behaviour of Slender RC Circular Columns Strengthened with Circular CFST Jackets. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
