Linglin Li 
- (2024): Particle loss mitigation in asphalt by the addition of polyethylene foam. In: Construction and Building Materials, v. 438 (August 2024).
- (2023): Characterisation of temperature and loading rate dependent bond strength on the Bitumen-aggregate interface using direct shear test. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Adhesive performance and impermeability mechanism of loess embankment using caster oil based polyurethane reinforce. In: Construction and Building Materials, v. 364 (January 2023).
- (2021): Coupled thermo-hydro-mechanical response of saturated asphalt pavement. In: Construction and Building Materials, v. 283 (May 2021).
- (2020): Effect of asphalt film thickness on shear mechanical properties of asphalt-aggregate interface. In: Construction and Building Materials, v. 263 (December 2020).
- (2018): Dynamic simulation analysis of the tire-pavement system considering temperature fields. In: Construction and Building Materials, v. 171 (May 2018).
- (2018): Investigation of Prony series model related asphalt mixture properties under different confining pressures. In: Construction and Building Materials, v. 166 (March 2018).
- (2013): Integrated Experimental and Numerical Study on Permanent Deformation of Asphalt Pavement at Intersections. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 7 (July 2013).
- (2012): Criteria for controlling rutting of asphalt concrete materials in sloped pavement. In: Construction and Building Materials, v. 35 (October 2012).
- (2015): Investigation of rutting behavior of asphalt pavement in long and steep section of mountainous highway with overloading. In: Construction and Building Materials, v. 93 (September 2015).
- (2015): Interface effects on the creep characteristics of asphalt concrete. In: Construction and Building Materials, v. 96 (October 2015).
- (2016): Verification and application of two-dimensional slice identification method in three-dimensional mesostructure under different aggregate gradations and packing algorithms. In: Construction and Building Materials, v. 102 (January 2016).
- (2017): Failure mechanism analysis of asphalt–aggregate systems subjected to direct shear loading. In: Materials and Structures, v. 50, n. 5 (October 2017).
- (2018): Characterizing stress-dependent complex and relaxation moduli of dense graded asphalt mixtures. In: Construction and Building Materials, v. 193 (December 2018).
Structurae cooperates with
