Jin Li 
- (2023): Buckling tests on I‐section steel columns strengthened by additive manufacturing. In: ce/papers, v. 6, n. 3-4 (September 2023).
- (2023): Impact of Variable Parameters of Expansion Joints and Bearing Supports on the Vehicle-Induced Vibration of Curved Girder Bridges. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Effect of freeze–thaw cycling on mechanical properties of Na-montmorillonite modified EICP-treated silty sand. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Low-temperature fracture behavior of railway asphalt concretes under semi-circular bending: Experimental and numerical investigation. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Bio-inspired functionalization of crumb rubber using polydopamine to enhance the performance of rubberized mortars. In: Construction and Building Materials, v. 407 (December 2023).
- (2023): Compaction Characteristics of a Foam Asphalt Hot In-Place Recycling Asphalt Mixture. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Effect of wet copper tailings on the performance of high-performance concrete. In: Journal of Building Engineering, v. 74 (September 2023).
- (2023): Electrical degradation dynamics of glass fiber-reinforced epoxy composites considering different fiber orientation. In: Composite Structures, v. 318 (August 2023).
- (2023): Exploring coffee extract as a renewable admixture to prepare mortars with better performance. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Experimental and numerical study on overall buckling behavior of Q460 high-strength steel continuous beams with welded singly symmetric I-section. In: Engineering Structures, v. 280 (April 2023).
- (2022): Field study on the effect of space type, exercise intensity, and wet bulb globe temperature on thermal responses of exercisers. In: Building and Environment, v. 225 (November 2022).
- (2022): Investigation on the utilization of spent waterglass foundry sand into Ca(OH)2-activated slag materials considering the coating layer of dried waterglass. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Evolution evaluation of high-speed railway asphalt concrete waterproofing layer during laboratory freeze–thaw cycles. In: Construction and Building Materials, v. 324 (March 2022).
- (2022): Identifying the risk factors and their interactions of human–robot collaboration implementation during engineering project construction: evidence from China. In: Engineering, Construction and Architectural Management, v. 30, n. 7 (May 2022).
- (2022): Influence of Different Excavation Sequence of Double-Side Heading Method on Supporting Structure. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2021): Evaluation of Infection Risk for SARS-CoV-2 Transmission on University Campuses. In: Science and Technology for the Built Environment, v. 27, n. 9 (August 2021).
- (2018): Influence of Temperature on Crack Initiation and Propagation in Granite. In: International Journal of Geomechanics, v. 18, n. 8 (August 2018).
- (2021): Application of Extreme Gradient Boosting Based on Grey Relation Analysis for Prediction of Compressive Strength of Concrete. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2014): Laboratory Study of Escherichia coli O157:H7 Contamination in Groundwater. In: Journal of Environmental Engineering (ASCE), v. 140, n. 9 (September 2014).
- (2021): Experimental study on the performance of CFRP-strengthened masonry structures under debris flow impacts. In: Structures, v. 31 (June 2021).
- (2020): Effect of laboratory long-term oven aging on the stiffness of asphalt mixtures. In: Construction and Building Materials, v. 258 (October 2020).
- (2019): Heat storage and release characteristics of composite phase change wall under different intermittent heating conditions. In: Science and Technology for the Built Environment, v. 25, n. 3 (March 2019).
- (2014): Analysis of elderly care in Changsha, China. In: Proceedings of the Institution of Civil Engineers - Urban Design and Planning, v. 167, n. 6 (December 2014).
- (2015): Extension-shear coupled laminates with immunity to hygro-thermal shearing distortion. In: Composite Structures, v. 123 (May 2015).
- (2020): Improved time-dependent seismic fragility estimates for deteriorating RC bridge substructures exposed to chloride attack. In: Advances in Structural Engineering, v. 24, n. 3 (September 2020).
- (2020): Acceptable temperature steps for occupants moving between air-conditioned main space and naturally ventilated transitional space of building. In: Building and Environment, v. 182 (September 2020).
- (2020): Ecological Retaining Wall for High-Steep Slopes: A Case Study in the Ji-Lai Expressway, Eastern China. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2018): Converting hollow fly ash into admixture carrier for concrete. In: Construction and Building Materials, v. 159 (January 2018).
- (2020): High temperature rheological characteristics of plasma-treated crumb rubber modified binders. In: Construction and Building Materials, v. 236 (March 2020).
- (2017): A Co-Evolution Model of Planning Space and Self-Built Space for Compact Settlements in Rural China. In: Nexus Network Journal, v. 19, n. 2 (June 2017).
Structurae cooperates with
