Jiabin Li 
- (2024): High-temperature behaviour of geopolymer composites containing carbon fibre and nano-silica: Mechanical, microstructure, and air-void characteristics. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Influence of ground granulated blast furnace slag on recycled concrete powder-based geopolymer cured at ambient temperature: Rheology, mechanical properties, reaction kinetics and air-void characteristics. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Mechanical Properties, Microstructure, and Mechanism of Nanosilica-Modified Low-Carbon Magnesium Silicate Hydrate Cement. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 11 (November 2024).
- (2024): Martian Regolith Simulant-Based Geopolymers with Lithium Hydroxide Alkaline Activator. In: Buildings, v. 14, n. 5 (24 April 2024).
- (2024): Performance of coal gangue concrete with fly ash and ground-granulated blast slag: Rheology, mechanical properties and microstructure. In: Construction and Building Materials, v. 427 (May 2024).
- (2024): Improved high-temperature resistance of limestone calcined clay cement (LC3) paste with biochar: Multiscale evaluation and mechanistic analysis. In: Developments in the Built Environment, v. 18 (April 2024).
- (2024): Load-bearing capacity of precast high-strength self-compacting recycled aggregate concrete column-to-column connections. In: Magazine of Concrete Research, v. 76, n. 6 (March 2024).
- (2023): Investigation of “elephant skin” on UHPC surface via a new test method: Influencing factors, formation mechanism and control measures. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): The effect of water absorption distribution of recycled coarse aggregate on the compressive strength distribution of high-performance concrete. In: Materiales de Construccion, v. 73, n. 352 (November 2023).
- (2024): Numerically optimized post‐cracking branch of the constitutive tensile model for fiber‐reinforced concrete with natural and recycled aggregates. In: Structural Concrete, v. 25, n. 1 (January 2024).
- (2023): Improved simplified constitutive tensile model for fiber‐reinforced concrete. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2005): Mechanical properties of recycled aggregate concrete under uniaxial loading. In: Cement and Concrete Research, v. 35, n. 6 (June 2005).
- (2023): Buildability assessment of mortar with fine recycled aggregates for 3D printing. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Comparison of mechanical, chemical, and thermal activation methods on the utilisation of recycled concrete powder from construction and demolition waste. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Fresh and hardened properties of cement paste and mortar incorporating calcined cutter soil mixing residue. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Comparative study on modelling concrete properties using physical and mechanical properties of recycled coarse aggregate. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Efflorescence mitigation in construction and demolition waste (CDW) based geopolymer. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): PVA fiber reinforced cement composites with calcined cutter soil mixing residue as a partial cement replacement. In: Construction and Building Materials, v. 326 (April 2022).
- (2021): Implementation and validation of Dewar’s particle packing model for recycled concrete aggregates. In: Construction and Building Materials, v. 294 (August 2021).
- (2022): Recycling of unseparated construction and demolition waste (UCDW) through geopolymer technology. In: Construction and Building Materials, v. 341 (July 2022).
- (2021): Modelling the effect of coarse recycled concrete aggregate on compressive strength of Portland cement concrete using volume fraction-based approach. In: Construction and Building Materials, v. 309 (November 2021).
- (2020): Feasibility of using microwave curing to enhance the compressive strength of mixed recycled aggregate powder based geopolymer. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Carbonation performance of concrete with fly ash as fine aggregate after stress damage and high temperature exposure. In: Construction and Building Materials, v. 242 (May 2020).
- (2020): Electrical resistivity of fly ash and metakaolin based geopolymers. In: Construction and Building Materials, v. 234 (February 2020).
- (2020): Effect of limestone powder on fracture and flexural behaviour of PVA fibre reinforced SAC. In: Magazine of Concrete Research, v. 72, n. 24 (December 2020).
- (2014): Empirical Models for Modulus of Elasticity of HSC Considering the Effect of In Situ Curing Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 8 (August 2014).
- (2013): Microplane constitutive model M4L for concrete. II: Calibration and validation. In: Computers & Structures, v. 128 (November 2013).
- (2013): Microplane constitutive model M4L for concrete. I: Theory. In: Computers & Structures, v. 128 (November 2013).
- (2014): Advanced Numerical Simulations for Prediction of Bearing Capacity and Failure of Complex RC Structures. In: Structural Engineering International, v. 24, n. 2 (May 2014).
- (2014): Computer Simulations of RC Structures for Practice. In: Structural Engineering International, v. 24, n. 2 (May 2014).
Structurae cooperates with
