Hui Li 
- (2024): Quantitative analysis of asphalt concrete’s tension-compression asymmetry effects on pavement response through 3D numerical modeling with dual viscoelastic model. In: Construction and Building Materials, v. 430 (June 2024).
- (2024): Rapid Prediction of Pile Friction Resistance Based on Soil Deformation Law Caused by a Super Large Diameter Tunnel: A Case Study. In: KSCE Journal of Civil Engineering, v. 28, n. 7 (April 2024).
- (2024): Preparing gypsum-based self-levelling energy storage mortar via fly ash cenospheres/paraffin used for floor radiant heating. In: Construction and Building Materials, v. 423 (April 2024).
- (2024): Post-flood disaster damaged houses classification based on dual-view image fusion and Concentration-Based Attention Module. In: Sustainable Cities and Society, v. 103 (April 2024).
- (2024): Phase evolution and mechanical performance of red mud-gypsum waste derived activator composite cementitious materials exposed to various Ca/Si and Al/S ratios. In: Construction and Building Materials, v. 412 (January 2024).
- (2023): Progressive collapse behaviour of composite substructure with large rectangular beam-web openings. In: Engineering Structures, v. 295 (November 2023).
- (2023): Predicting fatigue damage growth in cement-treated base layer built with construction and demolition waste. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Probabilistic outlier detection for robust regression modeling of structural response for high-speed railway track monitoring. In: Structural Health Monitoring, v. 23, n. 2 (July 2023).
- (2023): Permeability prediction of pervious concrete based on mix proportions and pore characteristics. In: Construction and Building Materials, v. 395 (September 2023).
- (2016): Real-Time Output-Only Identification of Time-Varying Cable Tension from Accelerations via Complexity Pursuit. In: Journal of Structural Engineering (ASCE), v. 142, n. 1 (January 2016).
- (2023): Pressure mapping and susceptibility to bonding failure for low-quality lamstock in cross laminated timber. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Quantification of the critical displacement initiating collapse of steel moment frames due to an interior column loss. In: Journal of Building Engineering, v. 54 (August 2022).
- (2021): Relationship of amorphous gel-microstructure-elastoviscosity properties of alkali-activated materials fresh pastes with different Ms waterglass. In: Construction and Building Materials, v. 287 (June 2021).
- (2023): Predictive model for fatigue life in parallel-wire stay cables considering corrosion variability. In: Structure and Infrastructure Engineering, v. 19, n. 7 (September 2023).
- (2021): Progressive fatigue damage model for FRP wires under longitudinal cyclic tensile loading. In: Composite Structures, v. 278 (December 2021).
- (2021): Pore Pressure and Strength Behaviors of Reconstituted Marine Sediments Involving Thermal Effects. In: International Journal of Geomechanics, v. 21, n. 4 (April 2021).
- (2020): Reliability evaluation index for the integrated supply chain utilising BIM and lean approaches. In: Engineering, Construction and Architectural Management, v. 27, n. 5 ( 2020).
- (2020): Relationship modeling between vehicle‐induced girder vertical deflection and cable tension by BiLSTM using field monitoring data of a cable‐stayed bridge. In: Structural Control and Health Monitoring, v. 28, n. 2 (October 2020).
- (2010): Preparation and characteristics of n-nonadecane/cement composites as thermal energy storage materials in buildings. In: Energy and Buildings, v. 42, n. 10 (October 2010).
- (2010): Reduction-Based Model Updating of a Scaled Offshore Platform Structure. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 2 (February 2010).
- (2019): Preparation and mechanical performance of annularly aligned steel fiber reinforced cement-based composite pipes. In: Construction and Building Materials, v. 211 (June 2019).
- (2011): Point-to-Surface Pounding of Highway Bridges with Deck Rotation Subjected to Bi-Directional Earthquake Excitations. In: Journal of Earthquake Engineering, v. 15, n. 2 ( 2011).
- (2012): Repair Effects and Acoustic Emission Technique–Based Fracture Evaluation for Predamaged Concrete Columns Confined with Fiber-Reinforced Polymers. In: Journal of Composites for Construction, v. 16, n. 6 (December 2012).
- (2014): Real-time hybrid simulation approach for performance validation of structural active control systems: a linear motor actuator based active mass driver case study. In: Structural Control and Health Monitoring, v. 21, n. 4 (April 2014).
- (2014): Real-time identification of time-varying tension in stay cables by monitoring cable transversal acceleration. In: Structural Control and Health Monitoring, v. 21, n. 7 (July 2014).
- (2011): Pore structure and chloride permeability of concrete containing nano-particles for pavement. In: Construction and Building Materials, v. 25, n. 2 (February 2011).
- (2015): Properties of cold mix asphalt mixtures with reclaimed granular aggregate from crushed PCC pavement. In: Construction and Building Materials, v. 77 (February 2015).
- (2015): phenomenological contact-element model considering slight non-uniform contact for pounding analysis of highway bridges under seismic excitations. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 11 (September 2015).
- (2012): Reliability assessment of cable-stayed bridges based on structural health monitoring techniques. In: Structure and Infrastructure Engineering, v. 8, n. 9 (September 2012).
- (2018): Recycled glass fiber reinforced polymer composites incorporated in mortar for improved mechanical performance. In: Construction and Building Materials, v. 187 (October 2018).
Structurae cooperates with
