Hang Li 
- (2024): Development and property optimization of a sustainable phosphogypsum-based cementitious system with ground-granulated blast furnace slag and carbide slag. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Experimental investigation on dynamic performance of mode switching in an integrated system under the summer working conditions. In: Energy and Buildings, v. 321 (October 2024).
- (2024): Experimental study and numerical simulation analysis of RCS joint with asymmetric friction connection. In: Structures, v. 63 (May 2024).
- (2024): Experimental study on the corrosion performance of weathering high-strength bolt connections. In: Journal of Constructional Steel Research, v. 219 (August 2024).
- (2024): Full-scale experiments on smoke movement in a two-story detached house with two horizontal openings at the lower-floor ceiling. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Experimental and numerical investigations on fire development in a timber-based compartment with identification of characteristic events. In: Journal of Building Engineering, v. 87 (June 2024).
- (2023): Prediction of the complete flexural load–deflection curve of self-compacting concrete reinforced with hook-end steel fiber. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): High strain rate experiments and constitutive model for Q390D steel. In: Journal of Constructional Steel Research, v. 206 (July 2023).
- (2023): Adaptive neural controller with predefined boundary constraints for 3D printed cable-driven soft actuators. In: Smart Materials and Structures, v. 32, n. 6 (21 April 2023).
- (2023): Improving IFC-Based Interoperability between BIM and BEM Using Invariant Signatures of HVAC Objects. In: Journal of Computing in Civil Engineering, v. 37, n. 2 (March 2023).
- (2023): Mechanical properties of steel wires of 1670 MPa, 1770 MPa, and 1860 MPa grades under high strain rates and temperatures. In: Journal of Constructional Steel Research, v. 204 (May 2023).
- (2023): Effects of sulfate and freeze–thaw cycles on the bond behavior of CFRP-concrete interface. In: Construction and Building Materials, v. 368 (March 2023).
- (2023): Fabrication and thermoelectric property of the nano Fe2O3/carbon fiber/cement-based composites for potential energy harvesting application. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): Experiment and numerical analysis on flexural behavior of cold-formed thin-walled C-shaped steel-paper straw board composite floors. In: Journal of Asian Architecture and Building Engineering, v. 22, n. 4 (December 2022).
- (2022): A novel numerical approach and experimental study to evaluate the effect of component failure on spoke-wheel cable structure. In: Journal of Building Engineering, v. 61 (December 2022).
- (2023): BIM-based object mapping using invariant signatures of AEC objects. In: Automation in Construction, v. 145 (January 2023).
- (2023): Fatigue behaviour of notched steel beams strengthened by a self-prestressing SMA/CFRP composite. In: Engineering Structures, v. 274 (January 2023).
- (2022): Experimental study on seismic behavior of the damage-control steel plate fuses for beam-to-column connection. In: Engineering Structures, v. 270 (November 2022).
- (2022): A novel composite material for flexible wearable devices based on eutectic gallium indium (EGaIn), multi-walled carbon nanotubes (MWCNTs) and polydimethylsiloxane (PDMS). In: Composite Structures, v. 291 (July 2022).
- (2022): Evaluation on the axial compression mechanical properties of short BFRP laminated bamboo lumber columns. In: Journal of Building Engineering, v. 53 (August 2022).
- (2022): Compression resistance of short LBL columns with local damage after retrofitting using basalt fiber reinforced polymer. In: Journal of Building Engineering, v. 48 (May 2022).
- (2022): Bond behavior of the CFRP-concrete interface under combined sustained load and sulfate erosion. In: Structures, v. 35 (January 2022).
- (2017): Exergoeconomic Analysis and Optimization of a Supercritical CO2 Cycle Coupled with a Kalina Cycle. In: Journal of Energy Engineering, v. 143, n. 2 (April 2017).
- (2021): Ballistic response of stitched woven fabrics with superior energy absorption capacity: Experimental and numerical investigation. In: Composite Structures, v. 261 (April 2021).
- (2021): Experimental and numerical study on steel ring restrainers with rectangular section. In: Journal of Constructional Steel Research, v. 177 (February 2021).
- (2020): Hysteretic Mechanical Behaviour of an Eccentrically Loaded Partially-Concrete-Filled Steel Tubular Bridge Pier under Out-of-Plane Horizontal Cyclic Loading. In: KSCE Journal of Civil Engineering, v. 24, n. 5 (April 2020).
- (2020): Flexural Performance of Basalt Textile-Reinforced Concrete with Pretension and Short Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (March 2020).
- (2019): The Mechanical Properties of a New Corrugated Steel Plate Damper and Its Application in a Steel Arch Bridge. In: KSCE Journal of Civil Engineering, v. 24, n. 1 (December 2019).
- (2019): Meso-mechanical research on alkali-silica reaction expansion in Pyrex glass and silica sand at different temperatures and curing times. In: Construction and Building Materials, v. 223 (October 2019).
- (2017): Performance of a Prestressed Concrete Pipe Energy Pile during Heating and Cooling. In: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 3 (June 2017).
Structurae cooperates with
