Cheng Li 
- (2023): Crab-claw inspired high performance and flame-retardant magnesium oxychloride cement based adhesive reinforced by 4-arms EDTA and tartaric acid for wood industry. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Influence of deep penetrating sealer on concrete surface performance. In: Magazine of Concrete Research, v. 75, n. 22 (November 2023).
- (2023): Finite element analyses on hysteretic behavior of steel frames infilled with AAC masonry wall with circular-arc openings. In: Journal of Asian Architecture and Building Engineering, v. 22, n. 5 (January 2023).
- (2022): Multiscale modeling framework to predict the low-velocity impact and compression after impact behaviors of plain woven CFRP composites. In: Composite Structures, v. 299 (November 2022).
- (2016): On bending, buckling and vibration of graphene nanosheets based on the nonlocal theory. In: Smart Structures and Systems, v. 17, n. 2 (February 2016).
- (2022): Application and validation of fly ash based geopolymer mortar as grouting material in porous asphalt concrete. In: Construction and Building Materials, v. 332 (May 2022).
- (2021): New innovations in pavement materials and engineering: A review on pavement engineering research 2021. In: Journal of Traffic and Transportation Engineering (English Edition), v. 8, n. 6 (December 2021).
- (2021): Investigation on the mechanism and performance of asphalt and its mixture regenerated by waste engine oil. In: Construction and Building Materials, v. 313 (December 2021).
- (2017): Examining spatiotemporally varying effects of urban expansion and the underlying driving factors. In: Sustainable Cities and Society, v. 28 (January 2017).
- (2020): Experimental and theoretical investigation of thermal performance of Yaokang heating system in China. In: Energy and Buildings, v. 226 (November 2020).
- (2020): Effect of short-term aging on interface-cracking behaviors of warm mix asphalt under dry and wet conditions. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Impact damage assessment in orthotropic CFRP laminates using nonlinear Lamb wave: Experimental and numerical investigations. In: Composite Structures, v. 236 (March 2020).
- (2019): On the damage mechanism of high-speed ballast impact and compression after impact for CFRP laminates. In: Composite Structures, v. 229 (December 2019).
- (2018): An insight into the low-velocity impact behavior of patch-repaired CFRP laminates using numerical and experimental approaches. In: Composite Structures, v. 190 (April 2018).
- (2014): A nonlocal analytical approach for torsion of cylindrical nanostructures and the existence of higher-order stress and geometric boundaries. In: Composite Structures, v. 118 (December 2014).
- (2021): Large-scale shaking table tests on the seismic responses of soil slopes with various natural densities. In: Soil Dynamics and Earthquake Engineering, v. 140 (January 2021).
- (2020): Influence of water on warm-modified asphalt: Views from adhesion, morphology and chemical characteristics. In: Construction and Building Materials, v. 264 (December 2020).
- (2022): The Dongting Lake Bridge for an Expressway in China: Design, Construction and Analysis. In: Structural Engineering International, v. 32, n. 3 (July 2022).
- (2020): Incoming flow measurements of a utility-scale wind turbine using super-large-scale particle image velocimetry. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 197 (February 2020).
- (2018): Experimental study on seismic performance of fire-exposed perforated brick masonry wall. In: Construction and Building Materials, v. 180 (August 2018).
- (2012): Modeling ventilation in naturally ventilated double-skin façade with a venetian blind. In: Building and Environment, v. 57 (November 2012).
- (2012): A new zero-equation turbulence model for micro-scale climate simulation. In: Building and Environment, v. 47 (January 2012).
- (2020): Morphology-based indices and recommended sampling sizes for using image-based methods to quantify degradations of compacted aggregate materials. In: Construction and Building Materials, v. 230 (January 2020).
- (2018): The Application of Internet of Things (IOT) Technology in the Safety Monitoring System for Hoisting Machines. Presented at: 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China).
- (2015): Alkali-Activated Ground-Granulated Blast Furnace Slag for Stabilization of Marine Soft Clay. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 4 (April 2015).
- (2017): Gyratory abrasion with 2D image analysis test method for evaluation of mechanical degradation and changes in morphology and shear strength of compacted granular materials. In: Construction and Building Materials, v. 152 (October 2017).
- (2019): Considerations for laboratory resilient modulus testing of unbound pavement base materials. In: Construction and Building Materials, v. 195 (January 2019).
- (2014): A Global Artificial Fish Swarm Algorithm for Structural Damage Detection. In: Advances in Structural Engineering, v. 17, n. 3 (March 2014).
- (2015): Estimation of sediment transport with an in-situ acoustic retrieval algorithm in the high-turbidity Changjiang Estuary, China. In: China Ocean Engineering, v. 29, n. 6 (November 2015).
- (2018): In situ modulus reduction characteristics of stabilized pavement foundations by multichannel analysis of surface waves and falling weight deflectometer tests. In: Construction and Building Materials, v. 188 (November 2018).
Structurae cooperates with
