Bin Li 
- (2024): Coupling effect of concrete cracks and stray current on chloride-induced corrosion of rebar. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Construction of flame retardant functionalized carbon dot with insulation, flame retardancy and thermal conductivity in epoxy resin. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): A CFD-DEM investigation into hydraulic transport and retardation response characteristics of drainage pipeline siltation using intelligent model. In: Tunnelling and Underground Space Technology, v. 152 (October 2024).
- (2024): Design of deployable mesh reflector antenna based on cable-dome tensegrity structure. In: Structures, v. 68 (October 2024).
- : Attention‐optimized 3D segmentation and reconstruction system for sewer pipelines employing multi‐view images. In: Computer-Aided Civil and Infrastructure Engineering.
- (2024): Constant static pressure strategy for residential kitchen exhaust system: Deducing control parameters from required exhaust rate and non-distributed data transmission. In: Building and Environment, v. 259 (July 2024).
- (2023): Analytical solution for longitudinal seismic response of immersed tunnel connecting artificial islands crossing different strata. In: Computers and Geotechnics, v. 164 (December 2023).
- (2024): Coupling effects of sewage sludge and recycled fine aggregate on the properties of geopolymer recycled mortars. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Development of composite magnesium oxychloride cement and its application on solidification of dredged sludge. In: Construction and Building Materials, v. 420 (March 2024).
- (2023): Diode effects on street canyon ventilation in valley city: Temperature inversion and calm geostrophic wind. In: Building and Environment, v. 244 (October 2023).
- (2024): An automatic defect classification and segmentation method on three-dimensional point clouds for sewer pipes. In: Tunnelling and Underground Space Technology, v. 143 (January 2024).
- (2023): Defects identification and location of underground space for ground penetrating radar based on deep learning. In: Tunnelling and Underground Space Technology, v. 140 (October 2023).
- (2023): 3D reconstruction and segmentation system for pavement potholes based on improved structure-from-motion (SFM) and deep learning. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Association between thermal comfort and cortisol depends on the air temperature and exposure time. In: Building and Environment, v. 233 (April 2023).
- (2023): Assessing heat risk for residents of complex urban areas from an accessibility-based perspective. In: Sustainable Cities and Society, v. 88 (January 2023).
- (2022): Big Data-Based Performance Analysis of Tunnel Boring Machine Tunneling Using Deep Learning. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): Characterization of Residual Moisture Distribution in Cold-Recycled Mixtures with Foamed Asphalt Using Hyperspectral Technology. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 11 (November 2022).
- (2022): Bell-and-spigot joints mechanical properties study of PCCP under the uneven settlement of foundation: Simulation and full-scale test. In: Structures, v. 43 (September 2022).
- (2022): Design, Analysis and Application of a Mandrel-Beam-Frictional Sliding Damper. In: KSCE Journal of Civil Engineering, v. 26, n. 6 (April 2022).
- (2009): Design and Realization of Technical Demonstration System for Intelligent Highway System. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 1 (June 2009).
- (2020): Does pollution-intensive industrial agglomeration increase residents’ health expenditure?. In: Sustainable Cities and Society, v. 56 (May 2020).
- (2020): A complex slide-buckling-toppling failure of under-dip soft rock slopes. In: European Journal of Environmental and Civil Engineering, v. 26, n. 9 (December 2020).
- (2021): Accounting for the microstructure in the prediction of the fatigue life of injection moulded composites for automotive applications. In: Composite Structures, v. 255 (January 2021).
- (2018): Design and manufacture of a dual-functional exterior wall structure for 1.1–5 GHz electromagnetic radiation absorption. In: Composite Structures, v. 201 (October 2018).
- (2020): Application of settlement monitoring of underground excavation station vault based on inverted rule method. In: IOP Conference Series: Materials Science and Engineering, v. 780 (April 2020).
- (2020): Dam monitoring data analysis methods: A literature review. In: Structural Control and Health Monitoring, v. 27, n. 3 (4 February 2020).
- (2019): Accurate and fast three-dimensional free vibration analysis of large complex structures using the finite element method. In: Computers & Structures, v. 221 (September 2019).
- (2019): Aided regeneration system of aged asphalt binder based on microcapsule technology. In: Construction and Building Materials, v. 201 (March 2019).
- (2011): Combined Shear and Flexural Behavior of Hybrid FRP-Concrete Beams Previously Subjected to Cyclic Loading. In: Journal of Composites for Construction, v. 15, n. 5 (October 2011).
- (2013): Cyclic Behavior of FRP Concrete Bridge Pier Frames. In: Journal of Bridge Engineering (ASCE), v. 18, n. 5 (May 2013).
Structurae cooperates with
