Biao Li 
- (2024): Uniaxial compressive stress-strain behavior of steel fiber reinforced geopolymer concrete confined by stirrups: Experimental study and analytical model. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Low-code AutoML solutions for predicting bond strength and failure modes of CFRP-steel joints. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Mechanical behavior and stress-strain model of steel-polypropylene hybrid fiber reinforced ultra-high performance concrete under triaxial compression. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Numerical evaluation of ground source heat pumps in a thawing permafrost region. In: Journal of Building Engineering, v. 98 (December 2024).
- : From knowledge encoding to procedural generation for early-stage layout design: A case of linear shopping centres. In: Frontiers of Architectural Research.
- (2024): Two-Stage Analysis Method for the Mechanical Response of Adjacent Existing Tunnels Caused by Foundation Pit Excavation. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2024): Size effect in the mechanical characteristics of steel fiber reinforced alkali-activated slag/fly ash-based concrete. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): An off-grid solar district energy system with borehole thermal energy storage: Life cycle assessment in a subarctic region. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Modelling nonlinear shear creep behaviour of a structural adhesive using deep neural networks (DNN). In: Construction and Building Materials, v. 414 (February 2024).
- (2023): Geometric characteristics, deployment mechanisms, and digital fabrication methods of a free-form deployable membrane system based on CNC-knitted fabrics and CNC-bent frames. In: Journal of Asian Architecture and Building Engineering, v. 23, n. 4 (November 2023).
- (2024): Failure mechanism and deformation forecasting of surrounding rock mass in an underground cavern based on engineering analogy method. In: Tunnelling and Underground Space Technology, v. 143 (January 2024).
- (2023): Influence of abrasive waterjet pre-cutting slit on the performance of shield cutter cutting reinforced concrete. In: Tunnelling and Underground Space Technology, v. 142 (December 2023).
- (2023): Monotonic and cyclic compressive behavior of ultra-high performance concrete with coarse aggregate: Experimental investigation and constitutive model. In: Journal of Building Engineering, v. 68 (June 2023).
- (2022): Improvement of microseismic source location during cavern excavation in faulted rock mass using fast marching method. In: Tunnelling and Underground Space Technology, v. 128 (October 2022).
- (2022): Full-scale linear cutting tests to study the influence of pre-groove depth on rock-cutting performance by TBM disc cutter. In: Tunnelling and Underground Space Technology, v. 122 (April 2022).
- (2021): HHT-Based Seismic Damage Analysis of a Subgrade Slope Reinforced by a Gravity Retaining Wall. In: Soil Mechanics and Foundation Engineering, v. 58, n. 5 (November 2021).
- (2021): Improved SVR Method for Predicting the Cutting Force of a TBM Cutter Using Linear Cutting Machine Test Data. In: KSCE Journal of Civil Engineering, v. 25, n. 11 (August 2021).
- (2021): Training deep convolution network with synthetic data for architectural morphological prototype classification. In: Frontiers of Architectural Research, v. 10, n. 2 (June 2021).
- (2021): Rheological behavior and compressive strength of concrete made with recycled fine aggregate of different size range. In: Construction and Building Materials, v. 268 (January 2021).
- (2018): Study on accurate identification of soil thermal properties under different experimental parameters. In: Energy and Buildings, v. 164 (April 2018).
- (2017): Progressive failure analysis of 2D woven composites at the meso-micro scale. In: Composite Structures, v. 178 (October 2017).
- (2020): Stability Analysis of the Left Bank Slope of Baihetan Hydropower Station Based on the MF-DFA Method. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2019): Mechanism of valley narrowing deformation during reservoir filling of a high arch dam. In: European Journal of Environmental and Civil Engineering, v. 27, n. 6 (June 2019).
- (2020): Study on Coupling of Glass Powder and Steel Fiber as Silica Fume Replacement in Ultra-High Performance Concrete: Concrete Sleeper Admixture Case Study. In: KSCE Journal of Civil Engineering, v. 24, n. 5 (April 2020).
- (2021): Optimizing mix proportion of recycled aggregate concrete by readjusting the aggregate gradation. In: Structural Concrete, v. 22 (January 2021).
- (2020): Incoming flow measurements of a utility-scale wind turbine using super-large-scale particle image velocimetry. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 197 (February 2020).
- (2015): Revisiting the ‘Venturi effect’ in passage ventilation between two non-parallel buildings. In: Building and Environment, v. 94 (December 2015).
- (2015): Surface wind pressure tests on buildings with various non-uniformity morphological parameters. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 137 (February 2015).
- (2019): Microscopic & macroscopic characterizations of Beijing marble as a building material for UNESCO heritage sites: New insights into physico-mechanical property estimation and weathering resistance. In: Construction and Building Materials, v. 225 (November 2019).
- (2017): Microseismic early warning of surrounding rock mass deformation in the underground powerhouse of the Houziyan hydropower station, China. In: Tunnelling and Underground Space Technology, v. 62 (February 2017).
Structurae cooperates with
