Aiqun Li 
- (2024): Dual-objective control of braced steel frame using asynchronized parallel two-stage yielding BRB. In: Soil Dynamics and Earthquake Engineering, v. 179 (April 2024).
- (2023): Enhancing seismic performance of brace frame using self-centering friction damper with variable slip stiffness. In: Engineering Structures, v. 292 (October 2023).
- (2023): Experimental investigation of novel pre-compressed viscoelastic dampers with different matrix materials. In: Structures, v. 53 (July 2023).
- (2023): Fatigue Strengthening for Rib-to-Deck Joint by Bonding Reinforcing Plates on the Deck Surface. In: Journal of Bridge Engineering (ASCE), v. 28, n. 7 (July 2023).
- (2023): Experimental and numerical investigations on the similitude effect of scaled lead rubber bearings for shaking table test. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Fatigue Damage Mitigation for Welded Beam-to-Column Connections in Steel High-Rise Buildings Using Passive Vibration Control. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2022): Equivalent linearization method for seismic analysis and design of self-centering structures. In: Engineering Structures, v. 271 (November 2022).
- (2022): Experimental study on a new type of precast beam-column joint. In: Journal of Building Engineering, v. 51 (July 2022).
- (2020): Fatigue failure and optimization of double-sided weld in orthotropic steel bridge decks. In: Engineering Failure Analysis, v. 116 (October 2020).
- (2014): Establishment and Application of the Wind and Structural Health Monitoring System for the Runyang Yangtze River Bridge. In: Shock and Vibration, v. 2014 ( 2014).
- (2010): Effect of boundary conditions on modal parameters of the Run Yang Suspension Bridge. In: Smart Structures and Systems, v. 6, n. 8 (November 2010).
- (2021): An experimental study of the combined hysteretic behavior of dougong and upper frame in Yingxian Wood Pagoda. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Hysteretic behavior of an ancient Chinese multi-layer timber substructure: A full-scale experimental test and analytical model. In: Journal of Building Engineering, v. 43 (November 2021).
- (2018): Fatigue performance investigation for hangers of suspension bridges based on site-specific vehicle loads. In: Structural Health Monitoring, v. 18, n. 3 (March 2018).
-
(1996): Experimental study of Reinforced Concrete framed shearwall with friction damping control devices. In: The Structural Design of Tall Buildings, v. 5, n. 2 ( 1996).
https://doi.org/10.1002/(sici)1099-1794(199606)5:2<129::aid-tal66>3.0.co;2-a
- (2021): Experimental study on the performance of damaged precast shear wall structures after base isolation. In: Engineering Structures, v. 228 (February 2021).
- (2020): Experimental Study on Corrosion-Fretting Fatigue Behavior of Bridge Cable Wires. In: Journal of Bridge Engineering (ASCE), v. 25, n. 12 (December 2020).
- (2020): Experimental investigation of the seismic performance of flexible pipes for seismically isolated buildings. In: Engineering Structures, v. 222 (November 2020).
- (2020): Experimental and Numerical Studies on the Seismic Performance of Precast Concrete Shear Wall Structures with an Energy Dissipation Cladding Panel. In: Journal of Earthquake Engineering, v. 26, n. 6 (November 2020).
- (2020): Equivalent uniform live loads under transit vehicles for floor slab of long-span urban transportation hubs. In: Journal of Asian Architecture and Building Engineering, v. 20, n. 3 (October 2020).
- (2020): Experimental investigation on long-term behavior of prestressed concrete beams under coupled effect of sustained load and corrosion. In: Advances in Structural Engineering, v. 23, n. 12 (April 2020).
- (2020): Effect of Semiactive Control on Wind and Seismic Responses of High-Rise Building Supported on Triple Friction Pendulums. In: Journal of Performance of Constructed Facilities (ASCE), v. 34, n. 3 (June 2020).
- (2020): Experimental and numerical studies on the lateral performance of concrete sandwich walls. In: The Structural Design of Tall and Special Buildings, v. 29, n. 6 (25 April 2020).
- (2020): Full-scale Experimental and Numerical Investigations on Seismic Performance of Square RC Frame Columns with Hollow Sections. In: Journal of Earthquake Engineering, v. 26, n. 1 (April 2020).
- (2019): Ground motion intensity measures for seismically isolated RC tall buildings. In: Soil Dynamics and Earthquake Engineering, v. 125 (October 2019).
- (2008): Finite Element Model Updating for the Runyang Cable-Stayed Bridge Tower Using Ambient Vibration Test Results. In: Advances in Structural Engineering, v. 11, n. 3 (June 2008).
- (2008): Experimental and Analytical Studies on Static and Dynamic Characteristics of Steel Box Girder for Runyang Cable-Stayed Bridge. In: Advances in Structural Engineering, v. 11, n. 4 (August 2008).
- (2017): Hybrid approach to seismic reliability assessment of engineering structures. In: Engineering Structures, v. 153 (December 2017).
- (2013): Horizontal Translocation of a High-Rise Building: Case Study. In: Journal of Performance of Constructed Facilities (ASCE), v. 27, n. 3 (June 2013).
- (2017): Evolutionary power spectral density analysis on the wind-induced buffeting responses of Sutong Bridge during Typhoon Haikui. In: Advances in Structural Engineering, v. 20, n. 2 (January 2017).
Structurae cooperates with
