Christopher K. Y. Leung
- (2023): Effects of relative humidity, alkaline concentration and temperature on the degradation of plain/coated glass fibers: Experimental investigation and empirical degradation model. In: Construction and Building Materials, v. 391 (August 2023).
- (2023): Effects of alkaline concentration and saline contents on degradation of tensile properties, microstructure and chemical characterization of glass fiber reinforced polymer (GFRP) rebars. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Development of High-Performance Foamed Concrete with Lightweight Aggregates for Structural Use. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (February 2023).
- (2022): Application of high-strength strain-hardening cementitious composites (SHCC) in the design of novel inter-module joint. In: Construction and Building Materials, v. 359 (December 2022).
- (2022): Effects of water-to-cement ratio on the performance of concrete and embedded GFRP reinforcement. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Correlation of flaw structure and cracking behavior in SHCC with X-ray CT scanning technique. In: Construction and Building Materials, v. 331 (May 2022).
- (2017): Effect of shear span-depth ratio on mechanical performance of RC beams strengthened in shear with U-wrapping FRP strips. In: Composite Structures, v. 177 (October 2017).
- (2018): Development of lightweight strain hardening cementitious composite for structural retrofit and energy efficiency improvement of unreinforced masonry housings. In: Construction and Building Materials, v. 167 (April 2018).
- (2018): Development of low drying shrinkage foamed concrete and hygro-mechanical finite element model for prefabricated building fasçade applications. In: Construction and Building Materials, v. 165 (March 2018).
- (1995): Crack-Bridging Force in Random Ductile Fiber Brittle Matrix Composites. In: Journal of Engineering Mechanics (ASCE), v. 121, n. 12 (December 1995).
- (2000): Debonding and Calibration Shift of Optical Fiber Sensors in Concrete. In: Journal of Engineering Mechanics (ASCE), v. 126, n. 3 (March 2000).
- (1997): Damage-Based Modeling of Fiber Pullout under Variable Compressive Stress. In: Journal of Engineering Mechanics (ASCE), v. 123, n. 4 (April 1997).
- (1996): Design Criteria for Pseudoductile Fiber-Reinforced Composites. In: Journal of Engineering Mechanics (ASCE), v. 122, n. 1 (January 1996).
- (2014): Effect of Uniaxial Strength and Fracture Parameters of Concrete on Its Biaxial Compressive Strength. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 6 (June 2014).
- (2007): Effect of Size on the Failure of Geometrically Similar Concrete Beams Strengthened in Shear with FRP Strips. In: Journal of Composites for Construction, v. 11, n. 5 (October 2007).
- (2008): Effect of End Tapering on Crack-Induced FRP Debonding from the Concrete Substrate. In: Journal of Composites for Construction, v. 12, n. 1 (February 2008).
- (2017): An effective discrete model for strain hardening cementitious composites: Model and concept. In: Computers & Structures, v. 185 (June 2017).
- (1988): Ceramics for construction. In: Construction and Building Materials, v. 2, n. 2 (July 1988).
- (2010): Effect of multiple secondary cracks on FRP debonding from the substrate of reinforced concrete beams. In: Construction and Building Materials, v. 24, n. 12 (December 2010).
- (2016): Effect of graphene oxide on the mechanical behavior of strain hardening cementitious composites. In: Construction and Building Materials, v. 120 (September 2016).
- (2017): Effect of fiber content variation on the strength of the weakest section in Strain Hardening Cementitious Composites (SHCC). In: Construction and Building Materials, v. 141 (June 2017).
- (2011): Effective Joining of Pre-cast Concrete Slabs with Self-compacting HSFRCC. In: Journal of Advanced Concrete Technology, v. 9, n. 1 ( 2011).
- (2009): The application of pseudo-ductile cementitious composites in the anchorage zone of post-tensioned concrete members. In: Materials and Structures, v. 42, n. 9 (November 2009).
- (2010): Evaluation of fracture parameters of concrete from bending test using inverse analysis approach. In: Materials and Structures, v. 43, n. 6 (July 2010).
- (2010): Development of pseudo-ductile permanent formwork for durable concrete structures. In: Materials and Structures, v. 43, n. 7 (August 2010).
- (2013): Effective joining method for pseudo-ductile permanent formwork. In: Materials and Structures, v. 46, n. 3 (March 2013).
- (2009): Effect of Concrete Composition on Interfacial Parameters Governing FRP Debonding from the Concrete Substrate. In: Advances in Structural Engineering, v. 12, n. 5 (October 2009).
- (2009): Delamination detection in an I-section glass fiber reinforced plastic beam with an optical fiber-based stress wave method. In: Smart Materials and Structures, v. 18, n. 6 (June 2009).
- (2018): Development of Multiscale Fiber-Reinforced Engineered Cementitious Composites with PVA Fiber and CaCO3 Whisker. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 6 (June 2018).
- (2001): Delamination Failure in Concrete Beams Retrofitted with a Bonded Plate. In: Journal of Materials in Civil Engineering (ASCE), v. 13, n. 2 (April 2001).
Structurae cooperates with
