Janet M. Lees 
- (2023): Carbon reduction and strength enhancement in functionally graded reinforced concrete beams. In: Engineering Structures, v. 277 (February 2023).
- (2023): Model fitting to concrete carbonation data with non-zero initial carbonation depth. In: Materials and Structures, v. 56, n. 1 (30 January 2023).
- (2023): Cracking behaviour of textile-reinforced concrete with varying concrete cover and textile surface finish. In: Composite Structures, v. 312 (May 2023).
- (2022): Bond strength and confinement in reinforced concrete. In: Construction and Building Materials, v. 355 (November 2022).
- (2023): Arch action in reinforced concrete subjected to shear. In: Engineering Structures, v. 274 (January 2023).
- (2022): An analysis of the potential for improving cement efficiency through functionally graded concrete elements with durability-driven concrete specification. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2021): Assessment of corrosion-induced bond deterioration in reinforced concrete: towards a splitting crack-based approach. Presented at: IABSE Congress: Resilient technologies for sustainable infrastructure, Christchurch, New Zealand, 3-5 February 2021.
- (2019): Effect of bond in the development length of CFRP pretensioned beams. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2019): Functionally graded concrete elements composed of vertical layers of different mixes. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): Analytical predictive model for the long-term bond performance of CFRP tendons in concrete. In: Composite Structures, v. 250 (October 2020).
- (2020): Interface bond strength of lightweight low-cement functionally layered concrete elements. In: Construction and Building Materials, v. 249 (July 2020).
- (2020): Functionally graded concrete: Design objectives, production techniques and analysis methods for layered and continuously graded elements. In: Construction and Building Materials, v. 242 (May 2020).
- (2019): Effect of internal moisture content and dynamic mechanical analysis testing conditions on the T values of CFRP tendons. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Corrosion-induced cracking and bond strength in reinforced concrete. In: Construction and Building Materials, v. 208 (May 2019).
- (2019): Experimental Behavior of CFRP Strap–Strengthened RC Beams Subjected to Sustained Loads. In: Journal of Composites for Construction, v. 23, n. 3 (June 2019).
- (2015): Impact of Material Deterioration on the Strength of Reinforced Concrete Half-Joint Structures. Presented at: IABSE Workshop: Safety, Robustness and Condition Assessment of Structures, Helsinki, Finland, 11-12 February 2015.
- (2016): Modified Push-Off Testing of an Inclined Shear Plane in Reinforced Concrete Strengthened with CFRP Fabric. In: Journal of Composites for Construction, v. 20, n. 3 (June 2016).
- (2018): Bond Durability of Carbon Fiber–Reinforced Polymer Tendons Embedded in High-Strength Concrete. In: Journal of Composites for Construction, v. 22, n. 5 (October 2018).
- (2009): Efficient CFRP Strap Configurations for the Shear Strengthening of Reinforced Concrete T-Beams. In: Journal of Composites for Construction, v. 13, n. 1 (February 2009).
- (2017): Mechanical and Durability Screening Test Methods for Cylindrical CFRP Prestressing Tendons. In: Journal of Composites for Construction, v. 21, n. 2 (April 2017).
- (2017): Experimental Investigation of Reinforced Concrete T-Beams Strengthened in Shear with Externally Bonded CFRP Sheets. In: Journal of Composites for Construction, v. 21, n. 2 (April 2017).
- (2009): Modeling of an Unbonded CFRP Strap Shear Retrofitting System for Reinforced Concrete Beams. In: Journal of Composites for Construction, v. 13, n. 4 (August 2009).
- (2007): Experimental Behavior of Reinforced Concrete Beams Strengthened with Prestressed CFRP Shear Straps. In: Journal of Composites for Construction, v. 11, n. 4 (August 2007).
- (2015): Bond behaviour of reinforcing bars in cracked concrete. In: Construction and Building Materials, v. 94 (September 2015).
- (2016): Impact of the reinforcement layout on the load capacity of reinforced concrete half-joints. In: Engineering Structures, v. 127 (November 2016).
- (2018): Integrated Fracture-Based Model Formulation for RC Crack Analysis. In: Journal of Structural Engineering (ASCE), v. 144, n. 7 (July 2018).
- (2017): The effect of local reinforcing bar reductions and anchorage zone cracking on the load capacity of RC half-joints. In: Engineering Structures, v. 152 (December 2017).
- (2018): Inspection of RC half-joint bridges in England: analysis of current practice. In: Proceedings of the Institution of Civil Engineers - Bridge Engineering, v. 171, n. 4 (December 2018).
- (2015): Evaluation of a minimum flexural reinforcement ratio using fracture-based modelling. Presented at: IABSE Conference: Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 2015.
Structurae cooperates with
