Kwang Ho Lee
- (2024): In-situ virtual heat flow meter model for monitoring heat flux of existing building envelope. In: Building and Environment, v. 253 (April 2024).
- (2024): Development and performance evaluation of intelligent algorithm for optimal control of a hybrid heat pump system during the cooling season. In: Energy and Buildings, v. 306 (March 2024).
- (2024): Benefits assessment of cool skin and ventilated cavity skin: Saving energy and mitigating heat and grid stress. In: Building and Environment, v. 247 (January 2024).
- (2024): Comparative energy analysis of cooling energy performance between conventional and hybrid air source internet data center cooling system. In: Energy and Buildings, v. 302 (January 2024).
- (2023): Machine learning based simultaneous control of air handling unit discharge air and condenser water temperatures set-point for minimized cooling energy in an office building. In: Energy and Buildings, v. 297 (October 2023).
- (2023): Comparative Analysis of ANN and LSTM Prediction Accuracy and Cooling Energy Savings through AHU-DAT Control in an Office Building. In: Buildings, v. 13, n. 6 (23 May 2023).
- (2023): Appropriate level of development of in-situ building information modeling for existing building energy modeling implementation. In: Journal of Building Engineering, v. 69 (June 2023).
- (2021): Performance characteristics of a cascade multi-functional heat pump in the winter season. In: Energy and Buildings, v. 253 (December 2021).
- (2020): Air-Handling-Unit Discharge Air Temperature Reset Based on Outdoor Air Temperature and Cooling Energy Performance in an Office Building. In: Journal of Energy Engineering, v. 146, n. 3 (June 2020).
- (2020): Variations of Stratification and Cooling Energy Performance According to Diffuser Condition in UFAD System. In: Journal of Energy Engineering, v. 146, n. 4 (August 2020).
- (2013): Cooling load reduction effect and its mechanism in between-glass cavity and venetian blind operation during the summer season. In: Building Simulation, v. 6, n. 4 (September 2013).
- (2021): In-situ application of an ANN algorithm for optimized chilled and condenser water temperatures set-point during cooling operation. In: Energy and Buildings, v. 233 (February 2021).
- (2008): The cooling and heating potential of an earth tube system in buildings. In: Energy and Buildings, v. 40, n. 4 (January 2008).
- (2009): Enhancement of natural ventilation in buildings using a thermal chimney. In: Energy and Buildings, v. 41, n. 6 (June 2009).
- (2010): Influence of raised floor on zone design cooling load in commercial buildings. In: Energy and Buildings, v. 42, n. 8 (August 2010).
- (2011): Simplified calculation method for design cooling loads in underfloor air distribution (UFAD) systems. In: Energy and Buildings, v. 43, n. 2-3 (February 2011).
- (2012): Automated control strategies of inside slat-type blind considering visual comfort and building energy performance. In: Energy and Buildings, v. 55 (December 2012).
- (2013): Supply air temperature impact in underfloor air distribution systems under Korean climatic conditions: Energy, humidity and comfort. In: Energy and Buildings, v. 58 (March 2013).
- (2013): An experimental study on the annual surface temperature characteristics of amorphous silicon BIPV window. In: Energy and Buildings, v. 62 (July 2013).
- (2014): Detailed heat balance analysis of the thermal load variations depending on the blind location and glazing type. In: Energy and Buildings, v. 75 (June 2014).
- (2014): Possibility of coupling outdoor air cooling and radiant floor cooling under hot and humid climate conditions. In: Energy and Buildings, v. 81 (October 2014).
- (2016): Detailed analysis on part load ratio characteristics and cooling energy saving of chiller staging in an office building. In: Energy and Buildings, v. 119 (May 2016).
- (2016): Cooling energy performance analysis depending on the economizer cycle control methods in an office building. In: Energy and Buildings, v. 120 (May 2016).
- (2018): Influences of different operational configurations on combined effects of room air stratification and thermal decay in UFAD system. In: Energy and Buildings, v. 176 (October 2018).
- (2018): Operational behavior characteristics and energy saving potential of vertical closed loop ground source heat pump system combined with storage tank in an office building. In: Energy and Buildings, v. 179 (November 2018).
- (2017): Application of artificial neural networks for determining energy-efficient operating set-points of the VRF cooling system. In: Building and Environment, v. 125 (November 2017).
- (2013): Dynamic predictive clothing insulation models based on outdoor air and indoor operative temperatures. In: Building and Environment, v. 59 (January 2013).
Structurae cooperates with
