Jong-Han Lee
- (2024): Effects of carbonation curing on chemical attack in cement paste incorporating liquid-crystal display glass powder as a partial binder replacement. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Seismic microzonation of North Gyeongsang (South Korea) considering liquefaction potential: Application towards seismic risk assessment for Korean nuclear power plants. In: Soil Dynamics and Earthquake Engineering, v. 182 (July 2024).
- (2015): 분산제의 종류 및 사용량에 따른 CNT 보강 시멘트 복합체의 강도변화 (Strength of CNT Cement Composites with Different Types of Surfactants and Doses). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 19, n. 2 (March 2015).
- (2024): Seismic loss and resilience modeling of bridges in soft soils: towards the design of sustainable transportation infrastructure facilities. In: Sustainable and Resilient Infrastructure, v. 9, n. 5 (May 2024).
- (2023): Self-centering capacity of RC columns with smart plastic hinges of martensitic NiTi SMA bars. In: Smart Materials and Structures, v. 32, n. 11 (19 October 2023).
- (2023): Effects of double-arched geometry and tensile strength on the pullout resistance of fibers. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2022): On the efficiency of induced prestressing in SMA mortar beams through different thermal stimuli. In: Smart Materials and Structures, v. 31, n. 12 (10 November 2022).
- (2022): Development of cement composite with high-temperature detection performance using green earth. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Active action of prestressing on direct tensile behavior of mortar reinforced with NiTi SMA crimped fibers. In: Composite Structures, v. 281 (February 2022).
- (2021): Experimental investigation on the performance of flexural displacement recovery using crimped shape memory alloy fibers. In: Construction and Building Materials, v. 306 (November 2021).
- (2020): Pullout resistance of crimped reinforcing fibers using cold-drawn NiTi SMA wires. In: Construction and Building Materials, v. 265 (December 2020).
- (2019): Effects of blades inside a nozzle on the fiber orientation and distribution in fiber-reinforced cement-based materials. In: Composite Structures, v. 221 (August 2019).
- (2018): Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects. In: Composite Structures, v. 202 (October 2018).
- (2017): Influence of concrete strength combined with fiber content in the residual flexural strengths of fiber reinforced concrete. In: Composite Structures, v. 168 (May 2017).
- (2016): Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Flexural capacity of fiber reinforced concrete with a consideration of concrete strength and fiber content. In: Construction and Building Materials, v. 138 (May 2017).
- (2017): Twin-twist effect of fibers on the pullout resistance in cementitious materials. In: Construction and Building Materials, v. 146 (August 2017).
- (2013): Effect of shrinkage restraint on deflections of reinforced self-compacting concrete beams. In: KSCE Journal of Civil Engineering, v. 17, n. 7 (October 2013).
- (2015): A comparative study on wind loads between design standards for the design of pipe-rack structures. In: KSCE Journal of Civil Engineering, v. 20, n. 1 (February 2015).
- (2017): Experimental and Measurement Methods for the Small-Scale Model Testing of Lateral and Torsional Stability. In: International Journal of Concrete Structures and Materials, v. 11, n. 2 (June 2017).
- (2012): Effective Prediction of Thermal Conductivity of Concrete Using Neural Network Method. In: International Journal of Concrete Structures and Materials, v. 6, n. 3 (September 2012).
- (2017): Rollover instability of precast girders subjected to wind load. In: Magazine of Concrete Research, v. 69, n. 2 (January 2017).
- (2012): Analysis of Thermal Environmental Effects on Precast, Prestressed Concrete Bridge Girders: Temperature Differentials and Thermal Deformations. In: Advances in Structural Engineering, v. 15, n. 3 (March 2012).
- (2017): Breakout shear strength of cast-in-place anchors using shaking table tests. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 170, n. 12 (December 2017).
- (2012): Behavior of precast prestressed concrete bridge girders involving thermal effects and initial imperfections during construction. In: Engineering Structures, v. 42 (September 2012).
- (2012): An advanced vision-based system for real-time displacement measurement of high-rise buildings. In: Smart Materials and Structures, v. 21, n. 12 (December 2012).
- (2017): Evaluation of the lateral stability of precast beams on an elastic bearing support with a consideration of the initial sweep. In: Engineering Structures, v. 143 (July 2017).
- (2012): Investigation of Extreme Environmental Conditions and Design Thermal Gradients during Construction for Prestressed Concrete Bridge Girders. In: Journal of Bridge Engineering (ASCE), v. 17, n. 3 (May 2012).
- (2018): Assessment of probabilistic seismic performance of RC columns jacketed by FRP winding wires using analytical models. In: Engineering Structures, v. 171 (September 2018).
- (2018): Shear capacity of cast-in headed anchors in steel fiber-reinforced concrete. In: Engineering Structures, v. 171 (September 2018).
Structurae cooperates with
