H. K. Lee 
- (2023): Electrical impedance-based evaluation of self-healing degree in cement composites with biological admixtures. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Hydration kinetics of ordinary Portland cement mixed under a direct CO2 inject condition. In: Journal of Building Engineering, v. 77 (October 2023).
- (2018): Evolution of the binder gel in carbonation-cured Portland cement in an acidic medium. In: Cement and Concrete Research, v. 109 (July 2018).
- (2023): Hydration and phase conversion of MgO-modified calcium aluminate cement. In: Construction and Building Materials, v. 369 (March 2023).
- (2021): Experimental and theoretical studies of hydration of ultra-high performance concrete cured under various curing conditions. In: Construction and Building Materials, v. 278 (April 2021).
- (2022): Improved electromagnetic wave shielding capability of carbonyl iron powder-embedded lightweight CFRP composites. In: Composite Structures, v. 286 (April 2022).
- (2022): Evaluation of physicochemical properties and environmental impact of environmentally amicable Portland cement/metakaolin bricks exposed to humid or CO2 curing condition. In: Journal of Building Engineering, v. 47 (April 2022).
- (2022): Exploration of effects of CO2 exposure on the NOx-removal performance of TiO2-incorporated Portland cement evaluated via microstructural and morphological investigation. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Hydration properties of alkali-activated fly ash/slag binders modified by MgO with different reactivity. In: Journal of Building Engineering, v. 44 (December 2021).
- (2008): Finite element analysis of shear-deficient RC beams strengthened with CFRP strips/sheets. In: Structural Engineering and Mechanics, v. 30, n. 2 (September 2008).
- (2021): Hydration of calcium sulfoaluminate cement blended with blast-furnace slag. In: Construction and Building Materials, v. 268 (January 2021).
- (2021): Influence of carbon fiber additions on the electromagnetic wave shielding characteristics of CNT-cement composites. In: Construction and Building Materials, v. 269 (February 2021).
- (2018): Fabrication and design of electromagnetic wave absorber composed of carbon nanotube-incorporated cement composites. In: Composite Structures, v. 206 (December 2018).
- (2017): Flexural stress and crack sensing capabilities of MWNT/cement composites. In: Composite Structures, v. 175 (September 2017).
- (2016): The electrically conductive carbon nanotube (CNT)/cement composites for accelerated curing and thermal cracking reduction. In: Composite Structures, v. 158 (December 2016).
- (2016): Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites. In: Composite Structures, v. 136 (February 2016).
- (2014): Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio. In: Composite Structures, v. 116 (September 2014).
- (2014): Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume. In: Composite Structures, v. 107 (January 2014).
- (2013): Elastoplastic modeling of polymeric composites containing randomly located nanoparticles with an interface effect. In: Composite Structures, v. 99 (May 2013).
- (2020): Effects of biological admixtures on hydration and mechanical properties of Portland cement paste. In: Construction and Building Materials, v. 235 (February 2020).
- (2013): Effects of High Volumes of Fly Ash, Blast Furnace Slag, and Bottom Ash on Flow Characteristics, Density, and Compressive Strength of High-Strength Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 5 (May 2013).
- (2012): Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates. In: Construction and Building Materials, v. 26 (January 2012).
- (2012): Impacts of metakaolin on lightweight concrete by type of fine aggregate. In: Construction and Building Materials, v. 36 (November 2012).
- (2014): Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers. In: Construction and Building Materials, v. 50 (January 2014).
- (2014): Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles. In: Construction and Building Materials, v. 59 (May 2014).
- (2014): Improved chloride resistance of high-strength concrete amended with coal bottom ash for internal curing. In: Construction and Building Materials, v. 71 (November 2014).
- (2019): Enhancement of the modulus of compression of calcium silicate hydrates via covalent synthesis of CNT and silica fume. In: Construction and Building Materials, v. 198 (February 2019).
- (2015): Image Analysis and DC Conductivity Measurement for the Evaluation of Carbon Nanotube Distribution in Cement Matrix. In: International Journal of Concrete Structures and Materials, v. 9, n. 4 (December 2015).
- (2015): Heavy Metal Leaching, CO2 Uptake and Mechanical Characteristics of Carbonated Porous Concrete with Alkali-Activated Slag and Bottom Ash. In: International Journal of Concrete Structures and Materials, v. 9, n. 3 (September 2015).
- (2015): An experimental study on sag-resistance ability and applicability of sprayed FRP system on vertical and overhead concrete surfaces. In: Materials and Structures, v. 48, n. 1-2 (January 2015).
Structurae cooperates with
