Cheol-Ho Lee 
- (2024): 비선형 단자유도 모델을 활용한 마찰감쇠 천장시스템의 해석과 설계 (Seismic Response Analysis and Design of Friction-added Ceiling System Based on Simplified SDOF Model). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 36, n. 1 (27 February 2024).
- (2022): Shake table testing of braced and Friction-Added suspended ceilings and associated numerical study. In: Engineering Structures, v. 252 (February 2022).
- (2021): Nondimensionalized Bouc–Wen model with structural degradation for Kalman filter–based real-time monitoring. In: Engineering Structures, v. 244 (October 2021).
- (1998): System seismic performance of haunch repaired steel MRFs : dual panel zone modeling and a case study. In: Structural Engineering and Mechanics, v. 6, n. 2 (March 1998).
- (2021): Shake-Table Seismic Performance Evaluation of Direct- and Indirect-Hung Suspended Ceiling Systems. In: Journal of Earthquake Engineering, v. 26, n. 9 (May 2021).
- (2021): Strength prediction of steel CHS X-joints via leveraging finite element method and machine learning solutions. In: Journal of Constructional Steel Research, v. 176 (January 2021).
- (2020): Generalized Load Deformation Relationship for Bearing-Type Single-Bolted Connections. In: Journal of Structural Engineering (ASCE), v. 146, n. 7 (July 2020).
- (2020): Investigation of high-strength steel CHS X-joints loaded in compression including effect of chord stresses. In: Engineering Structures, v. 205 (February 2020).
- (2018): Seismic Performance of Concrete-Filled Tube Column-Reinforced Concrete Slab Connections with Shear Reinforcement. In: ACI Structural Journal, v. 116, n. 2 (March 2018).
- (2018): Flexural Testing of Circular Concrete-Filled Tubes without Axial Forces. In: ACI Structural Journal, v. 115, n. 2 (March 2018).
- (2012): Local Bucklingand Inelastic behaviour of Flexural Members Fabricated from 800MPa Tensile-Strength Steel. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2012): 고강도강재 단주의 압축강도 및 잔류응력 평가 (Compressive Strength and Residual Stress Evaluation of Stub Columns Fabricated of High Strength Steel). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 1 (February 2012).
- (2012): 개인별 시간지연효과를 고려한 확률론적 군중 하중모형 개발 (Development of Time Lag Considered (TLC) Crowd Load Model Based on Probabilistic Approach). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 1 (February 2012).
- (2007): Seismic design of reduced beam section steel moment connections with bolted web attachment. In: Journal of Constructional Steel Research, v. 63, n. 4 (April 2007).
- (2007): A simplified analytical story drift evaluation of steel moment frames with radius-cut reduced beam section. In: Journal of Constructional Steel Research, v. 63, n. 4 (April 2007).
- (2008): Punching shear strength and post-punching behavior of CFT column to RC flat plate connections. In: Journal of Constructional Steel Research, v. 64, n. 4 (April 2008).
- (2009): Simplified nonlinear progressive collapse analysis of welded steel moment frames. In: Journal of Constructional Steel Research, v. 65, n. 5 (May 2009).
- (2014): Strength and residual stress evaluation of stub columns fabricated from 800MPa high-strength steel. In: Journal of Constructional Steel Research, v. 102 (November 2014).
- (2017): Seismic retrofit of welded steel moment connections with highly composite floor slabs. In: Journal of Constructional Steel Research, v. 139 (December 2017).
- (2018): Flexural behavior of high-strength steel hybrid composite beams. In: Journal of Constructional Steel Research, v. 149 (October 2018).
- (2017): Structural Performance of 800 MPa High-Strength Steel Members and Application to Highrise and Mega Building Structures. In: International Journal of High-Rise Buildings (국제초고층학회논문집), v. 6, n. 3 (September 2017).
- (2018): Structural performance of CHS X-joints fabricated from high-strength steel. In: Steel Construction, v. 11, n. 4 (November 2018).
- (2014): Shearhead Reinforcement for Concrete Slab to Concrete-Filled Tube Column Connections. In: ACI Structural Journal, v. 111, n. 3 (May 2014).
- (2016): Strain compatibility method for the design of short rectangular concrete-filled tube columns under eccentric axial loads. In: Construction and Building Materials, v. 121 (September 2016).
- (2002): Seismic Design of Rib-Reinforced Steel Moment Connections based on Equivalent Strut Model. In: Journal of Structural Engineering (ASCE), v. 128, n. 9 (September 2002).
- (2013): Flexural Strength and Rotation Capacity of I-Shaped Beams Fabricated from 800-MPa Steel. In: Journal of Structural Engineering (ASCE), v. 139, n. 6 (June 2013).
- (2013): Simplified Method for Estimation of Beam Plastic Rotation Demand in Special Moment-Resisting Steel-Frame Structures. In: Journal of Structural Engineering (ASCE), v. 139, n. 11 (November 2013).
- (2011): Prediction of Column Axial Forces in Inverted V-braced Seismic Steel Frames Considering Brace Buckling. In: Journal of Structural Engineering (ASCE), v. 137, n. 12 (December 2011).
- (2010): Parallel Axial-Flexural Hinge Model for Nonlinear Dynamic Progressive Collapse Analysis of Welded Steel Moment Frames. In: Journal of Structural Engineering (ASCE), v. 136, n. 2 (February 2010).
- (2018): Optimum design of linear multiple tuned mass dampers subjected to white-noise base acceleration considering practical configurations. In: Engineering Structures, v. 171 (September 2018).
Structurae cooperates with
