- Integrating life-cycle environmental impact and costs into geotechnical design. In: Proceedings of the Institution of Civil Engineers - Engineering Sustainability, v. 177, n. 1 (February 2024). (2024):
- Ultrasonic dispersion of hard dispersed ultrafine milled cement-based grout for water sealing of fractured hard rock. In: Construction and Building Materials, v. 317 (January 2022). (2022):
- Roller compaction of rock-fill with automatic frequency control. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 173, n. 4 (August 2020). (2020):
- Characteristic values of geotechnical parameters in Eurocode 7. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 172, n. 4 (August 2019). (2019):
- Stability for a high embankment founded on sulfide clay. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 166, n. 1 (February 2013). (2013):
- Bearing capacity and failure behaviors of floating stiffened deep cement mixing columns under axial load. In: Soils and Foundations, v. 58, n. 2 (April 2018). (2018):
- Triaxial extension and tension tests on lime-cement-improved clay. In: Soils and Foundations, v. 59, n. 5 (October 2019). (2019):
- Low-temperature calcite precipitation in sand using CIPS. In: Proceedings of the Institution of Civil Engineers - Ground Improvement, v. 169, n. 1 (February 2016). (2016):
- Probabilistic design of dry deep mixing using an observational approach. In: Proceedings of the Institution of Civil Engineers - Ground Improvement, v. 168, n. 4 (November 2015). (2015):
- Comparing column penetration and total–sounding data for lime–cement columns. In: Proceedings of the Institution of Civil Engineers - Ground Improvement, v. 167, n. 4 (November 2014). (2014):
- Strength variability in lime-cement columns based on cone penetration test data. In: Proceedings of the Institution of Civil Engineers - Ground Improvement, v. 165, n. 1 (February 2012). (2012):
- Implementing the Extended Multivariate Approach in Design with Partial Factors for a Retaining Wall in Clay. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 3, n. 4 (December 2017). (2017):
- Dispersion of microfine cement grout with ultrasound and conventional laboratory dissolvers. In: Construction and Building Materials, v. 251 (August 2020). (2020):
- Influence of spatially varying thickness on load-bearing capacity of shotcrete. In: Tunnelling and Underground Space Technology, v. 98 (April 2020). (2020):
- Effect of basalt fiber inclusion on the mechanical properties and microstructure of cement-solidified kaolinite. In: Construction and Building Materials, v. 241 (April 2020). (2020):
- Probability distributions of shotcrete parameters for reliability-based analyses of rock tunnel support. In: Tunnelling and Underground Space Technology, v. 87 (May 2019). (2019):