Frank Lam
- (2024): Experimental and numerical investigation of the cyclic behaviour of coupled balloon-type CLT shear walls with high-capacity base connections. In: Engineering Structures, v. 319 (November 2024).
- (2023): Development of composite action in a new long-span timber composite floor: Full-scale experiment and analytical approach. In: Engineering Structures, v. 279 (March 2023).
- (2023): Long-term performance assessment of post-tensioned timber connections under different climates. In: Construction and Building Materials, v. 368 (March 2023).
- (2023): Influence of mixed-angle screw installations in CLT on the cyclic performance of commercial hold-down connections. In: Construction and Building Materials, v. 364 (January 2023).
- (2022): Experimental and Numerical Investigation of Long-Term Loss of Prestressing Force in Posttensioned Timber Joints with Different Structural Details. In: Journal of Structural Engineering (ASCE), v. 148, n. 9 (September 2022).
- (2022): Flexural and Shear Performance of Wood Composite Panel with Embedded Cross-Laminations. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 1 (January 2022).
- (2021): Experimental investigation on the rheological behavior of timber in longitudinal and transverse compression. In: Construction and Building Materials, v. 304 (October 2021).
- (2020): Feasibility of the analytical model for the splice beam with half-lap joints reinforced with different cross-sections and layout of self-tapping screws. In: Structures, v. 28 (December 2020).
- (2019): Comparison of glulam beam-to-beam connections with round dovetail and half-lap joints reinforced with self-tapping screws. In: Construction and Building Materials, v. 227 (December 2019).
- (2001): Computational Modeling of Strand-Based Wood Composites. In: Journal of Engineering Mechanics (ASCE), v. 127, n. 8 (August 2001).
- (2014): Damage assessment and performance-based seismic design of timber-steel hybrid shear wall systems. In: Earthquakes and Structures, v. 7, n. 1 (July 2014).
- (2019): Experimental and numerical study of moisture distribution and shrinkage crack propagation in cross section of timber members. In: Construction and Building Materials, v. 221 (October 2019).
- (2016): Bond Behavior between Softwood Glulam and Epoxy Bonded-In Threaded Steel Rod. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 3 (March 2016).
- (2009): Laterally braced wood beam-columns subjected to biaxial eccentric loading. In: Computers & Structures, v. 87, n. 17-18 (September 2009).
- (1999): Cyclic Performance of Perforated Wood Shear Walls with Oversize OSB Panels. In: Journal of Structural Engineering (ASCE), v. 125, n. 1 (January 1999).
- (2014): Experimental Investigation on Lateral Performance of Timber-Steel Hybrid Shear Wall Systems. In: Journal of Structural Engineering (ASCE), v. 140, n. 6 (June 2014).
- (2017): Flexural performance of spliced beam connected and reinforced with self-tapping wood screws. In: Engineering Structures, v. 152 (December 2017).
- (2015): Load-sharing mechanism in timber-steel hybrid shear wall systems. In: Frontiers of Structural and Civil Engineering, v. 9, n. 2 (June 2015).
- (1998): Influence of cyclic test protocols on performance of wood-based shear walls. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 25, n. 3 (June 1998).
- (2000): Length effect on the tensile strength of truss chord members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 27, n. 3 (June 2000).
- (1990): Length effect on the performance of lumber in tension. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 17, n. 6 (December 1990).
- (2013): Bending Performance of Box-Based Cross-Laminated Timber Systems. In: Journal of Structural Engineering (ASCE), v. 139, n. 12 (December 2013).
- (1997): Lateral Resistance of Wood Shear Walls with Large Sheathing Panels. In: Journal of Structural Engineering (ASCE), v. 123, n. 12 (December 1997).
- (2009): Lateral Performance of Nonsymmetric Diagonal-Braced Wood Shear Walls. In: Journal of Structural Engineering (ASCE), v. 135, n. 2 (February 2009).
- (2018): Experimental test of coupling effect on CLT angle bracket connections. In: Engineering Structures, v. 171 (September 2018).
- (2019): Experimental test of coupling effect on CLT hold-down connections. In: Engineering Structures, v. 178 (January 2019).
- (1998): Interaction Term of Tsai-Wu Theory for Laminated Veneer. In: Journal of Materials in Civil Engineering (ASCE), v. 10, n. 2 (May 1998).
- (2017): Force Transfer around Openings in Cross-Laminated Timber Shear Walls. In: Journal of Structural Engineering (ASCE), v. 143, n. 4 (April 2017).
- (2014): Finite element modeling and parametric analysis of timber-steel hybrid structures. In: The Structural Design of Tall and Special Buildings, v. 23, n. 14 (10 October 2014).
- (2008): Example of Traditional Tall Timber Buildings in China - the Yingxian Pagoda. In: Structural Engineering International, v. 18, n. 2 (May 2008).
Structurae cooperates with
