Jin-Hwe Kweon
- (2022): Electro-thermal heating element with a nickel-plated carbon fabric for the leading edge of a wing-shaped composite application. In: Composite Structures, v. 289 (June 2022).
- (2022): High-performance microwave absorption heating honeycomb sandwich composite with electroless nickel-plated glass fiber. In: Composite Structures, v. 283 (March 2022).
- (2021): Multiphysics anti-icing simulation of a CFRP composite wing structure embedded with thin etched-foil electrothermal heating films in glaze ice conditions. In: Composite Structures, v. 276 (November 2021).
- (2004): A new method to determine the characteristic lengths of composite joints without testing. In: Composite Structures, v. 66, n. 1-4 (October 2004).
- (2006): Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding. In: Composite Structures, v. 75, n. 1-4 (September 2006).
- (2020): Microwave absorbing structure using periodic pattern coated fabric. In: Composite Structures, v. 238 (April 2020).
- (2019): Cohesive zone method for failure analysis of scarf patch-repaired composite laminates under bending load. In: Composite Structures, v. 222 (August 2019).
- (2018): Micro-bolt repair for delaminated composite plate under compression. In: Composite Structures, v. 192 (May 2018).
- (2018): Failure load analysis of C-shaped composite beams using a cohesive zone model. In: Composite Structures, v. 184 (January 2018).
- (2018): Delamination analysis of multi-angle composite curved beams using an out-of-autoclave material. In: Composite Structures, v. 183 (January 2018).
- (2017): Delamination strength of composite curved beams reinforced by grooved stainless-steel Z-pins. In: Composite Structures, v. 180 (November 2017).
- (2016): Experimental and finite element analysis of curved composite structures with C-section. In: Composite Structures, v. 140 (April 2016).
- (2016): Parametric study on static and fatigue strength recovery of scarf-patch-repaired composite laminates. In: Composite Structures, v. 140 (April 2016).
- (2015): Defect detection in adhesive joints using the impedance method. In: Composite Structures, v. 120 (February 2015).
- (2015): Fatigue characteristics of jagged pin-reinforced composite single-lap joints in hygrothermal environments. In: Composite Structures, v. 119 (January 2015).
- (2014): Characterization of Nomex honeycomb core constituent material mechanical properties. In: Composite Structures, v. 117 (November 2014).
- (2014): Fatigue life evaluation and crack detection of the adhesive joint with carbon nanotubes. In: Composite Structures, v. 108 (February 2014).
- (2014): Fatigue characteristics of stainless steel pin-reinforced composite hat joints. In: Composite Structures, v. 108 (February 2014).
- (2014): Fatigue behaviour of metal pin-reinforced composite single-lap joints in a hygrothermal environment. In: Composite Structures, v. 108 (February 2014).
- (2013): Optimization of composite sandwich cylinders for underwater vehicle application. In: Composite Structures, v. 96 (February 2013).
- (2012): Failure behaviour of foam-based sandwich joints under pull-out testing. In: Composite Structures, v. 94, n. 2 (January 2012).
- (2010): Failure load evaluation and prediction of hybrid composite double lap joints. In: Composite Structures, v. 92, n. 12 (November 2010).
- (2010): Buckling of filament-wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications. In: Composite Structures, v. 92, n. 9 (August 2010).
- (2010): Manufacture and performance evaluation of the composite hat-stiffened panel. In: Composite Structures, v. 92, n. 9 (August 2010).
- (2010): Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses. In: Composite Structures, v. 92, n. 9 (August 2010).
- (2010): Effect of manufacturing methods on the shear strength of composite single-lap bonded joints. In: Composite Structures, v. 92, n. 9 (August 2010).
- (2008): An experimental study of the insert joint strength of composite sandwich structures. In: Composite Structures, v. 86, n. 1-3 (November 2008).
- (2008): An experimental study on the failure of carbon/epoxy single lap riveted joints after thermal exposure. In: Composite Structures, v. 86, n. 1-3 (November 2008).
- (2019): An investigation of repair methods for delaminated composite laminate under flexural load. In: Composite Structures, v. 215 (May 2019).
- (2002): Crippling analysis of composite stringers based on complete unloading method. In: Computers & Structures, v. 80, n. 27-30 (November 2002).
Structurae cooperates with
