Arvind Kumar
- (2023): Taking inspiration from medieval architecture: Using catenary arches in place of straight beam as the building block into bending-dominated lattice structures. In: Engineering Failure Analysis, v. 152 (October 2023).
- (2003): Closely Spaced Footings on Geogrid-Reinforced Sand. In: Journal of Geotechnical and Geoenvironmental Engineering, v. 129, n. 7 (July 2003).
- (2001): Use of Sequencing Batch Reactor for Biological Denitrification of High Nitrate-Containing Water. In: Journal of Environmental Engineering (ASCE), v. 127, n. 3 (March 2001).
- (2004): Utility of Column Lysimeter for Design of Soil Aquifer Treatment System for Wastewater Renovation Using Artificial Neural Networks. In: Journal of Environmental Engineering (ASCE), v. 130, n. 12 (December 2004).
- (1995): Studies on paper mill effluent as a workability aid for cement mortars. In: Building and Environment, v. 30, n. 4 (October 1995).
- (2013): Bearing Capacity Improvement in Soils using Waste Tire Rubber Fibers. In: i-manager's Journal on Structural Engineering, v. 1, n. 4 (February 2013).
- (2007): Influence of Fly Ash, Lime, and Polyester Fibers on Compaction and Strength Properties of Expansive Soil. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 3 (March 2007).
- (2018): Compaction and Strength Behavior of Tire Crumbles–Fly Ash Mixed with Clay. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 4 (April 2018).
- (2006): Compressive strength of fiber reinforced highly compressible clay. In: Construction and Building Materials, v. 20, n. 10 (December 2006).
- (1994): Large deflection analysis of Clifton suspension bridge. Presented at: International Conference IABSE-FIP: Ponts suspendus et à haubans = Cable-stayed and suspension bridges, Deauville, France, 12-15 October 1994.
Structurae cooperates with
