Tomohiro Kobayashi 
- (2024): Performance of all-air wall induction unit for displacement ventilation in a four-bed hospital ward during the cooling period. In: Building and Environment, v. 248 (January 2024).
- (2023): Heating and ventilation performance investigation of a novel linear slot diffuser with adaptive outlet area for near window applications. In: Building and Environment, v. 244 (October 2023).
- (2023): A novel portable cooling unit with air purification for displacement ventilation: Parametric study with zonal model and field experiment. In: Building and Environment, v. 244 (October 2023).
- (2023): Wind tunnel experiment of wind-induced single-sided ventilation under generic sheltered urban area. In: Building and Environment, v. 242 (August 2023).
- (2023): Energy saving, indoor thermal comfort and indoor air quality evaluation of an office environment using corner impinging jet ventilation. In: Developments in the Built Environment, v. 15 (October 2023).
- (2023): Analysis of single-sided ventilation flows of a generic isolated building using particle tracking method in LES simulation. In: Building and Environment, v. 235 (May 2023).
- (2023): A literature review of cross ventilation in buildings. In: Energy and Buildings, v. 291 (July 2023).
- (2022): Effect of source location on contaminant dispersion pattern and occupants inhaled air quality in lecture room under displacement ventilation. In: Japan Architectural Review, v. 6, n. 1 (21 November 2022).
- (2022): Numerical analysis of wind-induced natural ventilation for an isolated cubic room with two openings under small mean wind pressure difference. In: Building and Environment, v. 226 (December 2022).
- (2022): Numerical Evaluation of the Flow Field of an Isothermal Dual-Corner Impinging Jet for Building Ventilation. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): Influence of inlet turbulent condition on the formation mechanism of local scalar concentrations. In: Japan Architectural Review, v. 5, n. 4 (September 2022).
- (2022): Numerical investigation of the flow behavior of an isothermal corner impinging jet for building ventilation. In: Building and Environment, v. 223 (September 2022).
- (2022): Impact of indoor aroma on students’ mood and learning performance. In: Building and Environment, v. 223 (September 2022).
- (2022): Experimental study and CFD modelling of four-bed hospital ward with all-air wall induction unit for air-conditioning. In: Building and Environment, v. 222 (August 2022).
- (2022): Prediction of thermal and contaminant environment in a room with impinging jet ventilation system by zonal model. In: Building and Environment, v. 221 (August 2022).
- (2022): Validity of Orifice equation and impact of building parameters on wind-induced natural ventilation rates with minute mean wind pressure difference. In: Building and Environment, v. 219 (July 2022).
- (2022): Modeling of supply airflow from slot line diffuser on ceiling for CFD of thermal environment in perimeter zone. In: Building and Environment, v. 213 (April 2022).
- (2022): Simplified prediction using block model for vertical profile of temperature and contaminant concentration in a room with impinging jet ventilation. In: Building and Environment, v. 209 (February 2022).
- (2022): Evaluation of outdoor thermal comfort under different building external-wall-surface with different reflective directional properties using CFD analysis and model experiment. In: Building and Environment, v. 207 (January 2022).
- (2021): Effect of supply velocity and heat generation density on cooling and ventilation effectiveness in room with impinging jet ventilation system. In: Building and Environment, v. 205 (November 2021).
- (2021): Applicability of displacement ventilation and impinging jet ventilation system to heating operation. In: Japan Architectural Review, v. 4, n. 2 (March 2021).
- (2020): Influence of vertical airflow along walls on temperature and contaminant concentration distributions in a displacement-ventilated four-bed hospital ward. In: Building and Environment, v. 183 (October 2020).
- (2017): Numerical investigation and accuracy verification of indoor environment for an impinging jet ventilated room using computational fluid dynamics. In: Building and Environment, v. 115 (April 2017).
- (2013): Evaluation of ventilation performance of monitor roof in residential area based on simplified estimation and CFD analysis. In: Building and Environment, v. 63 (May 2013).
- (2010): Experimental investigation and CFD analysis of cross-ventilated flow through single room detached house model. In: Building and Environment, v. 45, n. 12 (December 2010).
- (2009): Power transportation inside stream tube of cross-ventilated simple shaped model and pitched roof house. In: Building and Environment, v. 44, n. 7 (July 2009).
Structurae cooperates with
