Taewan Kim 
- (2023): Development of construction materials using red mud and brine. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Influence of brine on hydration reaction of calcium sulfoaluminate and slag blended cement. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Cost–Benefit Analysis of Scan-vs-BIM-Based Quality Management. In: Buildings, v. 12, n. 12 (1 December 2022).
- (2022): Effects of sodium aluminate and reverse osmosis brine on hydration and mechanical properties of slag. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): The compressive strength and microstructural properties of alkali-activated slag cement mixed with zinc oxide. In: Magazine of Concrete Research, v. 74, n. 18 (September 2022).
- (2022): Effect of reverse-osmosis brine and sodium aluminate on the hydration properties and strength of alkali-activated slag cement. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2021): Characteristics of alkali-activated slag cement-based ultra-lightweight concrete with high-volume cenosphere. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Influence of seawater on alkali-activated slag concrete. In: Materials and Structures, v. 54, n. 3 (16 April 2021).
- (2021): Empirical Observation of Maximum Throughput Change in Isolated Merging Bottlenecks Depending on On-Ramp Traffic Flow Ratio. In: KSCE Journal of Civil Engineering, v. 25, n. 5 (12 March 2021).
- (2020): The Mechanical Properties of Alkali-Activated Slag-Silica Fume Cement Pastes by Mixing Method. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 January 2020).
- (2013): Improvement of a Requirement for Providing Special Boundary Element Considering Feature of Domestic High-rise Shear Walls. In: Architectural Research, v. 15, n. 1 (March 2013).
- (2016): A comparison of ground-based LiDAR and met mast wind measurements for wind resource assessment over various terrain conditions. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 158 (November 2016).
- (2018): Assessment of Korean Seismic Design Practice for Low-rise Reinforced Concrete Wall-frame Buildings. In: Journal of Asian Architecture and Building Engineering, v. 17, n. 3 (September 2018).
- (2020): Pore and strength characteristics of alkali-activated slag paste with seawater. In: Magazine of Concrete Research, v. 72, n. 10 (May 2020).
- (2009): Assessment of progressive collapse-resisting capacity of steel moment frames. In: Journal of Constructional Steel Research, v. 65, n. 1 (January 2009).
- (2009): Collapse analysis of steel moment frames with various seismic connections. In: Journal of Constructional Steel Research, v. 65, n. 6 (June 2009).
- (2010): Flexural behavior of steel I-beam prestressed with externally unbonded tendons. In: Journal of Constructional Steel Research, v. 66, n. 1 (January 2010).
- (2010): Flexural behavior of continuous steel girder with external post-tensioning and section enhancement. In: Journal of Constructional Steel Research, v. 66, n. 2 (February 2010).
- (2008): Concrete Maturity Method Using Variable Temperature Curing for Normal and High-Strength Concrete. I: Experimental Study. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 12 (December 2008).
- (2008): Concrete Maturity Method Using Variable Temperature Curing for Normal-Strength Concrete Mixes. II: Theoretical Study. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 12 (December 2008).
- (2016): Modeling lane formation in pedestrian counter flow and its effect on capacity. In: KSCE Journal of Civil Engineering, v. 20, n. 3 (March 2016).
- (2009): Progressive Collapse-Resisting Capacity of Steel Moment Frames considering Panel Zone Deformation. In: Advances in Structural Engineering, v. 12, n. 2 (April 2009).
- (2007): Application of FEMA methodology to RC shear wall buildings governed by flexure. In: Engineering Structures, v. 29, n. 10 (October 2007).
- (2009): The dependence of infiltration pressure and volume in zeolite Y on potassium chloride concentration. In: Smart Materials and Structures, v. 18, n. 2 (February 2009).
- (2017): Proposed new equivalent lateral force design method for low-rise reinforced concrete wall-frame mixed building systems. In: Engineering Structures, v. 152 (December 2017).
- (2007): Inspection of Quebec Street Bridge in Denver, Colorado: Destructive and Nondestructive Testing. In: Journal of Performance of Constructed Facilities (ASCE), v. 21, n. 3 (June 2007).
- (2009): Investigation of Progressive Collapse-Resisting Capability of Steel Moment Frames Using Push-Down Analysis. In: Journal of Performance of Constructed Facilities (ASCE), v. 23, n. 5 (October 2009).
- (2018): Mechanical Properties of Na2CO3-Activated High-Volume GGBFS Cement Paste. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2012): Parametric and comparative study of spandrel beam effect on the punching shear strength of reinforced concrete flat plates. In: The Structural Design of Tall and Special Buildings, v. 21, n. 8 (October 2012).
Structurae cooperates with
