Sunghwan Kim 
- (2023): Evaluating and modeling aggregate loss of Otta seal for low-volume roads. In: Construction and Building Materials, v. 398 (September 2023).
- (2024): An artificial-intelligence based approach for predicting structural damages of paved-road systems under superloads. In: Construction and Building Materials, v. 411 (January 2024).
- (2022): A review of electrically conductive concrete heated pavement system technology: From the laboratory to the full-scale implementation. In: Construction and Building Materials, v. 329 (April 2022).
- (2009): Sensitivity Analysis of Rigid Pavement Systems Using the Mechanistic-Empirical Design Guide Software. In: Journal of Transportation Engineering, v. 135, n. 8 (August 2009).
- (2012): Structural Characterization of Iowa’s Rubblized PCC Pavements. In: Journal of Transportation Engineering, v. 138, n. 4 (April 2012).
- (2012): Moisture Susceptibility of Subgrade Soils Stabilized by Lignin-Based Renewable Energy Coproduct. In: Journal of Transportation Engineering, v. 138, n. 11 (November 2012).
- (2014): Calibration of Pavement ME Design and Mechanistic-Empirical Pavement Design Guide Performance Prediction Models for Iowa Pavement Systems. In: Journal of Transportation Engineering, v. 140, n. 10 (October 2014).
- (2018): Development of Carbon Fiber-modified Electrically Conductive Concrete for Implementation in Des Moines International Airport. In: Case Studies in Construction Materials, v. 8 (June 2018).
- (2018): Energy and thermal performance evaluation of an automated snow and ice removal system at airports using numerical modeling and field measurements. In: Sustainable Cities and Society, v. 43 (November 2018).
- (2020): Design and Full-scale Implementation of the Largest Operational Electrically Conductive Concrete Heated Pavement System. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Investigation of Longitudinal Cracking in Widened Concrete Pavements. In: The Baltic Journal of Road and Bridge Engineering, v. 15, n. 1 (17 March 2020).
- (2011): Support Vector Machines Approach to HMA Stiffness Prediction. In: Journal of Engineering Mechanics (ASCE), v. 137, n. 2 (February 2011).
- (2014): Highway Infrastructure Health Monitoring Using Micro-electromechanical Sensors and Systems (mems). In: Journal of Civil Engineering and Management, v. 19 (January 2014).
- (2010): Non-destructive Evaluation of In-place Rehabilitated Concrete Pavements. In: Journal of Civil Engineering and Management, v. 16, n. 4 (December 2010).
- (2011): A Simplified Approach for Predicting Early-Age Concrete Pavement Deformation/ Supaprastintas metodas, prognozuojantis ankstyvojo betono dangos deformacijas. In: Journal of Civil Engineering and Management, v. 17, n. 1 (April 2011).
- (2019): Effect of Carbon-Fiber Properties on Volumetrics and Ohmic Heating of Electrically Conductive Asphalt Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 9 (September 2019).
- (2019): Comparison between cement paste and asphalt mastic modified by carbonaceous materials: Electrical and thermal properties. In: Construction and Building Materials, v. 213 (July 2019).
- (2009): Accuracy of Predictive Models for Dynamic Modulus of Hot-Mix Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 6 (June 2009).
- (2010): Global Optimization of Pavement Structural Parameters during Back-Calculation Using Hybrid Shuffled Complex Evolution Algorithm. In: Journal of Computing in Civil Engineering, v. 24, n. 5 (September 2010).
- (2013): Sensitivity quantification of jointed plain concrete pavement mechanistic-empirical performance predictions. In: Construction and Building Materials, v. 43 (June 2013).
- (2014): Sensitivity analysis frameworks for mechanistic-empirical pavement design of continuously reinforced concrete pavements. In: Construction and Building Materials, v. 73 (December 2014).
- (2017): Superhydrophobic coatings on Portland cement concrete surfaces. In: Construction and Building Materials, v. 141 (June 2017).
- (2017): Influence of mix design variables on engineering properties of carbon fiber-modified electrically conductive concrete. In: Construction and Building Materials, v. 152 (October 2017).
- (2009): Theoretical analysis of energy harvesting performance for unimorph piezoelectric benders with interdigitated electrodes. In: Smart Materials and Structures, v. 18, n. 5 (May 2009).
- (2014): Finite element modeling of environmental effects on rigid pavement deformation. In: Frontiers of Structural and Civil Engineering, v. 8, n. 2 (May 2014).
- (2008): Advanced approaches to hot-mix asphalt dynamic modulus prediction. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 35, n. 7 (July 2008).
- (2008): Smoothness variations in early-age jointed plain concrete pavements. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 35, n. 12 (December 2008).
- (2010): Effects of Recycled Materials on Long-Term Performance of Cold In-Place Recycled Asphalt Roads. In: Journal of Performance of Constructed Facilities (ASCE), v. 24, n. 3 (June 2010).
- (2010): The Early-Age Response of Concrete Pavements to Temperature and Moisture Variations. In: The Baltic Journal of Road and Bridge Engineering, v. 5, n. 3 (September 2010).
- (2015): The Impact of farm equipment loading on low-volume concrete road structural response and performance. In: The Baltic Journal of Road and Bridge Engineering, v. 10, n. 4 (December 2015).
Structurae cooperates with
