0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Seung-Eock Kim

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Pham, Van-Thanh / Thai, Duc-Kien / Kim, Seung-Eock: A novel procedure for cable damage identification of cable-stayed bridge using particle swarm optimization and machine learning. In: Structural Health Monitoring.

    https://doi.org/10.1177/14759217241246501

  2. Wang, Yan / Wang, Junliang / Kong, Zhengyi / Zhu, Wei / Xu, Haoyu / Jiang, Chao / Cheng, Dongsheng / Kim, Seung-Eock (2023): A novelty method for monitoring the corrosion extent of steel plates based on Lamb wave. In: Journal of Civil Structural Health Monitoring, v. 14, n. 2 (October 2023).

    https://doi.org/10.1007/s13349-023-00737-x

  3. Kong, Zhengyi / Jin, Ya / Yang, Fan / Vu, Quang-Viet / Truong, Viet-Hung / Yu, Bo / Kim, Seung-Eock (2021): Numerical simulation for structural behaviour of stainless steel web cleat connections. In: Journal of Constructional Steel Research, v. 183 (August 2021).

    https://doi.org/10.1016/j.jcsr.2021.106706

  4. Kim, Seung-Eock / Song, Weon-Keun / Ma, Sang-Soo (2004): Optimal design using genetic algorithm with nonlinear elastic analysis. In: Structural Engineering and Mechanics, v. 17, n. 5 (May 2004).

    https://doi.org/10.12989/sem.2004.17.5.707

  5. Thai, Duc-Kien / Kim, Seung-Eock (2015): Numerical simulation of reinforced concrete slabs under missile impact. In: Structural Engineering and Mechanics, v. 53, n. 3 (February 2015).

    https://doi.org/10.12989/sem.2015.53.3.455

  6. Thai, Huu-Tai / Vo, Thuc P. / Nguyen, Trung-Kien / Kim, Seung-Eock (2017): A review of continuum mechanics models for size-dependent analysis of beams and plates. In: Composite Structures, v. 177 (October 2017).

    https://doi.org/10.1016/j.compstruct.2017.06.040

  7. Thai, Huu-Tai / Kim, Seung-Eock (2015): A review of theories for the modeling and analysis of functionally graded plates and shells. In: Composite Structures, v. 128 (September 2015).

    https://doi.org/10.1016/j.compstruct.2015.03.010

  8. Kim, Seung-Eock / Truong, Viet-Hung (2020): Reliability Evaluation of Semirigid Steel Frames Using Advanced Analysis. In: Journal of Structural Engineering (ASCE), v. 146, n. 5 (May 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002616

  9. Kim, Seung-Eock / Uang, Chia-Ming / Choi, Se-Hyu / An, Ki-Yong (2006): Practical advanced analysis of steel frames considering lateral-torsional buckling. In: Thin-Walled Structures, v. 44, n. 7 (July 2006).

    https://doi.org/10.1016/j.tws.2006.08.004

  10. Ngo-Huu, Cuong / Kim, Seung-Eock (2009): Practical advanced analysis of space steel frames using fiber hinge method. In: Thin-Walled Structures, v. 47, n. 4 (April 2009).

    https://doi.org/10.1016/j.tws.2008.08.007

  11. Ngo-Huu, Cuong / Nguyen, Phu-Cuong / Kim, Seung-Eock (2012): Second-order plastic-hinge analysis of space semi-rigid steel frames. In: Thin-Walled Structures, v. 60 (November 2012).

    https://doi.org/10.1016/j.tws.2012.06.019

  12. Thai, Huu-Tai / Kim, Seung-Eock (2015): Second-order distributed plasticity analysis of steel frames with semi-rigid connections. In: Thin-Walled Structures, v. 94 (September 2015).

    https://doi.org/10.1016/j.tws.2015.04.011

  13. Kim, Seung-Eock / Ma, Sang-Soo (2007): Optimal design using genetic algorithm with nonlinear inelastic analysis. In: Steel and Composite Structures, v. 7, n. 6 (December 2007).

    https://doi.org/10.12989/scs.2007.7.6.421

  14. Kim, Seung-Eock / Park, Moon-Ho / Choi, Se-Hyu (2001): Practical advanced analysis and design of three-dimensional truss bridges. In: Journal of Constructional Steel Research, v. 57, n. 8 (August 2001).

    https://doi.org/10.1016/s0143-974x(01)00015-3

  15. Kim, Seung-Eock / Choi, Se-Hyu / Ma, Sang-Soo (2003): Performance based design of steel arch bridges using practical inelastic nonlinear analysis. In: Journal of Constructional Steel Research, v. 59, n. 1 (January 2003).

    https://doi.org/10.1016/s0143-974x(02)00019-6

  16. Kim, Seung-Eock / Lee, Dong-Ho / Ngo-Huu, Cuong (2007): Shaking table tests of a two-story unbraced steel frame. In: Journal of Constructional Steel Research, v. 63, n. 3 (March 2007).

    https://doi.org/10.1016/j.jcsr.2006.04.009

  17. Thai, Huu-Tai / Kim, Seung-Eock (2011): Practical advanced analysis software for nonlinear inelastic dynamic analysis of steel structures. In: Journal of Constructional Steel Research, v. 67, n. 3 (March 2011).

    https://doi.org/10.1016/j.jcsr.2010.09.009

  18. Thai, Huu-Tai / Kim, Seung-Eock (2011): Second-order inelastic dynamic analysis of steel frames using fiber hinge method. In: Journal of Constructional Steel Research, v. 67, n. 10 (October 2011).

    https://doi.org/10.1016/j.jcsr.2011.03.022

  19. Ngo-Huu, Cuong / Kim, Seung-Eock (2012): Practical nonlinear analysis of steel–concrete composite frames using fiber–hinge method. In: Journal of Constructional Steel Research, v. 74 (July 2012).

    https://doi.org/10.1016/j.jcsr.2012.02.018

  20. Kong, Zhengyi / Kim, Seung-Eock (2016): Numerical estimation of the initial stiffness and ultimate moment capacity of single-web angle connections. In: Journal of Constructional Steel Research, v. 121 (June 2016).

    https://doi.org/10.1016/j.jcsr.2016.02.011

  21. Truong, Viet-Hung / Kim, Seung-Eock (2018): A robust method for optimization of semi-rigid steel frames subject to seismic loading. In: Journal of Constructional Steel Research, v. 145 (June 2018).

    https://doi.org/10.1016/j.jcsr.2018.02.025

  22. Kong, Zhengyi / Kim, Seung-Eock (2018): Numerical estimation for initial stiffness and ultimate moment of T-stub connections. In: Journal of Constructional Steel Research, v. 141 (February 2018).

    https://doi.org/10.1016/j.jcsr.2017.11.008

  23. Kim, Seung-Eock / Chen, Wai-Fah (1998): A sensitivity study on number of elements in refined plastic-hinge analysis. In: Computers & Structures, v. 66, n. 5 (March 1998).

    https://doi.org/10.1016/s0045-7949(97)00081-3

  24. Kim, Seung-Eock / Lee, Dong-Ho (2002): Second-order distributed plasticity analysis of space steel frames. In: Engineering Structures, v. 24, n. 6 (June 2002).

    https://doi.org/10.1016/s0141-0296(01)00136-5

  25. Choi, Se-Hyu / Kim, Seung-Eock (2002): Optimal design of steel frame using practical nonlinear inelastic analysis. In: Engineering Structures, v. 24, n. 9 (September 2002).

    https://doi.org/10.1016/s0141-0296(02)00053-6

  26. Kong, Zhengyi / Kim, Seung-Eock (2017): Numerical Estimation for Initial Stiffness and Ultimate Moment of Top-Seat Angle Connections without Web Angle. In: Journal of Structural Engineering (ASCE), v. 143, n. 10 (October 2017).

    https://doi.org/10.1061/(asce)st.1943-541x.0001875

  27. Thai, Duc-Kien / Kim, Seung-Eock (2016): Prediction of UHPFRC panels thickness subjected to aircraft engine impact. In: Case Studies in Structural Engineering, v. 5 (June 2016).

    https://doi.org/10.1016/j.csse.2016.03.003

  28. Kim, Seung-Eock / Chen, Wai-Fah (1996): Practical Advanced Analysis for Unbraced Steel Frame Design. In: Journal of Structural Engineering (ASCE), v. 122, n. 11 (November 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:11(1259)

  29. Kim, Seung-Eock / Chen, Wai-Fah (1996): Practical Advanced Analysis for Braced Steel Frame Design. In: Journal of Structural Engineering (ASCE), v. 122, n. 11 (November 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:11(1266)

  30. Kim, Seung-Eock / Lee, Jong-She / Choi, Se-Hyu / Kim, Chang-Sung (2004): Practical second-order inelastic analysis for steel frames subjected to distributed load. In: Engineering Structures, v. 26, n. 1 (January 2004).

    https://doi.org/10.1016/j.engstruct.2003.08.010

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine