Jin-Ho Kim
- (2016): 진동절연재로 보강된 기둥부재의 진동저감효과 및 구조적 거동분석 (Vibration Reduction Effect and Structural Behavior Analysis for Column Member Reinforced with Vibration Non-transmissible Material). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 20, n. 4 (July 2016).
- (2010): 건설현장의 위험요소 사례연구를 통한 위험저감 방안의 고찰 -토공사, 기초공사, 철근콘크리트공사를 대상으로- (Plans for Reducing Risk through a Case Study of Risk Factors at a Construction Site -Focused on Earth work, Foundation Work, Reinforced Concrete Construction-). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 10, n. 4 (August 2010).
- (2010): 건설업 안전사고의 원인과 사고발생원리의 분석을 통한 안전관리 합리화 방안의 고찰 -매몰(埋沒), 화사(火事), 폭렬(爆裂), 화상(火傷)을 대상으로- (A study on the Rationalization of Safety Management through the Analysis of Accident Cause and Occurrence Principles for Safety Accidents in the Construction Industry -Fo. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 10, n. 3 (June 2010).
- (2008): 양중계획입안 프로세스의 구조화를 통한 프로젝트 정보관리 방안 (A Plan of Project Information Management through Analysis of Drafting Process for Transportation Planning). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 8, n. 3 (June 2008).
- (2005): PMIS구축의 저해요인 분석을 통한 PMIS의 효율적인 적용방안 (Effective Application of PMIS through Analysis of Barriers At the Development of PMIS). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 5, n. 4 (December 2005).
- (2004): 건설산업에 있어서 제조물책임법의 시행에 따른 영향과 대응방안 기초연구 (The Influence and Construction Strategies of Constructor under the PL Law in Construction Industry). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 4, n. 4 (December 2004).
- (2002): 국내 건설 현장관리업무의 개선방안에 관한 연구 (A study on the Improvement Plan of Construction Site Management In Korea). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 2, n. 4 (December 2002).
- (2022): The characteristics of ventilated pool fires of Daegok-Sosa subway lines using Model-Scale tunnels and stations. In: Tunnelling and Underground Space Technology, v. 121 (March 2022).
- (2012): Evaluation of structural outrigger belt truss layouts for tall buildings by using topology optimization. In: Structural Engineering and Mechanics, v. 43, n. 6 (September 2012).
- (2015): A systematic approach for energy efficient building design factors optimization. In: Energy and Buildings, v. 89 (February 2015).
- (2013): Experimental and analytical investigation of high-strength concrete-filled steel tube square columns subjected to flexural loading. In: Steel and Composite Structures, v. 14, n. 2 (February 2013).
- (2007): An evaluation equation of load capacities for CFT square column-to-beam connections with combined diaphragm. In: Steel and Composite Structures, v. 7, n. 4 (August 2007).
- (2006): Experimental study on seismic performance of concrete filled tubular square column-to-beam connections with combined cross diaphragm. In: Steel and Composite Structures, v. 6, n. 4 (August 2006).
- (2012): 800MPa급 고강도강 보 부재의 국부좌굴 및 비탄성 거동. Local Buckling and Inelastic Behaviour of 800 MPa High-Strength Steel Beams. In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 4 (August 2012).
- (2012): 고강도강재 단주의 압축강도 및 잔류응력 평가 (Compressive Strength and Residual Stress Evaluation of Stub Columns Fabricated of High Strength Steel). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 1 (February 2012).
- (2010): Hysteresis behavior of concrete filled square steel tube column-to-beam partially restrained composite connections. In: Journal of Constructional Steel Research, v. 66, n. 7 (July 2010).
- (2010): A study on the seismic performance of concrete-filled square steel tube column-to-beam connections reinforced with asymmetric lower diaphragms. In: Journal of Constructional Steel Research, v. 66, n. 7 (July 2010).
- (2014): Strength and residual stress evaluation of stub columns fabricated from 800MPa high-strength steel. In: Journal of Constructional Steel Research, v. 102 (November 2014).
- (2015): Mitigation of stress concentration in a diagrid structural system using circular steel tubes. In: International Journal of Steel Structures, v. 15, n. 3 ( 2015).
- (2014): Material performance evaluation and super-tall building applicability of the 800 MPa high-strength steel plates for building structures. In: International Journal of Steel Structures, v. 14, n. 4 ( 2014).
- (2012): Prediction of hysteretic behavior of high-strength square concrete-filled steel tubular columns subjected to eccentric loading. In: International Journal of Steel Structures, v. 12, n. 2 ( 2012).
- (2010): Evaluating relaxation of high-strength bolts by parameters on slip faying surfaces of bolted connections. In: International Journal of Steel Structures, v. 10, n. 3 ( 2010).
- (2009): Method for estimating the clamping force of high strength bolts subjected to temperature variation. In: International Journal of Steel Structures, v. 9, n. 2 ( 2009).
- (2009): Structural behavior of tension joint with high-strength bolted split-tee. In: International Journal of Steel Structures, v. 9, n. 2 ( 2009).
- (2013): Flexural Strength and Rotation Capacity of I-Shaped Beams Fabricated from 800-MPa Steel. In: Journal of Structural Engineering (ASCE), v. 139, n. 6 (June 2013).
- (2005): Effects of Panel Zone Strength and Beam Web Connection Method on Seismic Performance of Reduced Beam Section Steel Moment Connections. In: Journal of Structural Engineering (ASCE), v. 131, n. 12 (December 2005).
- (2009): Behavior of Double Skin Composite Wall Subjected to In-Plane Cyclic Loading. In: Journal of Structural Engineering (ASCE), v. 135, n. 10 (October 2009).
Structurae cooperates with
