Hak-Sung Kim 
- (2023): Prediction of stress-strain behavior of carbon fabric woven composites by deep neural network. In: Composite Structures, v. 318 (August 2023).
- (2023): Machine learning-based damage sensing and self-healing of carbon fiber/nylon composites via addressable conducting networks. In: Structural Health Monitoring, v. 22, n. 5 (February 2023).
- (2022): 3D printed continuous carbon fiber reinforced thermoplastic composite sandwich structure with corrugated core for high stiffness/load capability. In: Composite Structures, v. 291 (July 2022).
- (2021): Deep-learning based damage sensing of carbon fiber/polypropylene composite via addressable conducting network. In: Composite Structures, v. 267 (July 2021).
- (2021): Study on inter-ply friction between woven and unidirectional prepregs and its effect on the composite forming process. In: Composite Structures, v. 267 (July 2021).
- (2020): Effect of Nonlinear Soil Model on Seismic Response of Slopes Composed of Granular Soil. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Design and manufacture of automotive composite front bumper assemble component considering interfacial bond characteristics between over-molded chopped glass fiber polypropylene and continuous glass fiber polypropylene composite. In: Composite Structures, v. 236 (March 2020).
- (2019): Complex structured polymer concrete sleeper for rolling noise reduction of high-speed train system. In: Composite Structures, v. 223 (September 2019).
- (2019): Progressive failure analysis of woven composites considering structural characteristics based on micro-mechanics. In: Composite Structures, v. 224 (September 2019).
- (2019): Prediction of non-linear mechanical behavior of shear deformed twill woven composites based on a multi-scale progressive damage model. In: Composite Structures, v. 224 (September 2019).
- (2019): Prediction of the mechanical behavior of fiber-reinforced composite structure considering its shear angle distribution generated during thermo-compression molding process. In: Composite Structures, v. 220 (July 2019).
- (2017): Effect of the cooling rate on the mechanical properties of glass fiber reinforced thermoplastic composites. In: Composite Structures, v. 177 (October 2017).
- (2017): Improving pedestrian safety via the optimization of composite hood structures for automobiles based on the equivalent static load method. In: Composite Structures, v. 176 (September 2017).
- (2017): Three-dimensional progressive failure modeling of glass fiber reinforced thermoplastic composites for impact simulation. In: Composite Structures, v. 176 (September 2017).
- (2017): Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness. In: Composite Structures, v. 160 (January 2017).
- (2016): Nondestructive evaluation of hidden multi-delamination in a glass-fiber-reinforced plastic composite using terahertz spectroscopy. In: Composite Structures, v. 156 (November 2016).
- (2016): Dependence of polymer concrete vibration characteristics on internal pipe and damper embedment. In: Composite Structures, v. 143 (May 2016).
- (2016): Identification of stiffness distribution of fatigue loaded polymer concrete through vibration measurements. In: Composite Structures, v. 136 (February 2016).
- (2015): Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab. In: Composite Structures, v. 134 (December 2015).
- (2015): Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle. In: Composite Structures, v. 131 (November 2015).
- (2019): Prediction of the vacuum assisted resin transfer molding (VARTM) process considering the directional permeability of sheared woven fabric. In: Composite Structures, v. 211 (March 2019).
- (2019): The influence of consolidation temperature on in-plane and interlaminar mechanical properties of self-reinforced polypropylene composite. In: Composite Structures, v. 210 (February 2019).
- (2015): 연마재 투입형 워터젯 시스템의 공정 변수에 따른 연마재 투입량 변화 (Variation of abrasive feed rate with abrasive injection waterjet system process parameters). In: Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집), v. 17, n. 2 ( 2015).
Structurae cooperates with
