H. K. Kim
- (2018): Sectional Analysis of Corroded Wires in Chloride-contaminated Tendon. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2018): Fatigue assessment of deteriorated steel bridge members considering corrosion. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2018): Development of Calibration Factor for Fatigue Assessment. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2015): Thermo-mechanical analysis of road structures used in the on-line electric vehicle system. In: Structural Engineering and Mechanics, v. 53, n. 3 (February 2015).
- (2017): Flexural stress and crack sensing capabilities of MWNT/cement composites. In: Composite Structures, v. 175 (September 2017).
- (2016): Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites. In: Composite Structures, v. 136 (February 2016).
- (2014): Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio. In: Composite Structures, v. 116 (September 2014).
- (2014): Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume. In: Composite Structures, v. 107 (January 2014).
- (2013): Effects of High Volumes of Fly Ash, Blast Furnace Slag, and Bottom Ash on Flow Characteristics, Density, and Compressive Strength of High-Strength Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 5 (May 2013).
- (2011): Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete. In: Construction and Building Materials, v. 25, n. 2 (February 2011).
- (2012): Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates. In: Construction and Building Materials, v. 26 (January 2012).
- (2012): Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air. In: Construction and Building Materials, v. 29 (April 2012).
- (2012): Influence of silica fume additions on electromagnetic interference shielding effectiveness of multi-walled carbon nanotube/cement composites. In: Construction and Building Materials, v. 30 (May 2012).
- (2012): Impacts of metakaolin on lightweight concrete by type of fine aggregate. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): Microbially mediated calcium carbonate precipitation on normal and lightweight concrete. In: Construction and Building Materials, v. 38 (January 2013).
- (2013): Alkali-activated, cementless, controlled low-strength materials (CLSM) utilizing industrial by-products. In: Construction and Building Materials, v. 49 (December 2013).
- (2014): Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles. In: Construction and Building Materials, v. 59 (May 2014).
- (2014): Improved chloride resistance of high-strength concrete amended with coal bottom ash for internal curing. In: Construction and Building Materials, v. 71 (November 2014).
- (2016): Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar. In: Construction and Building Materials, v. 126 (November 2016).
- (2014): Coal bottom ash in field of civil engineering: A review of advanced applications and environmental considerations. In: KSCE Journal of Civil Engineering, v. 19, n. 6 (December 2014).
- (1999): Quantitative feedback theory control of a single-link flexible manipulator featuring piezoelectric actuator and sensor. In: Smart Materials and Structures, v. 8, n. 3 (June 1999).
- (2003): construction de la passerelle de Seonyu. Un arc en Ductal® à Séoul. In: Travaux, n. 793 (January 2003).
Structurae cooperates with
