Dong joo Kim 
- (2024): Enhancing image resolution in single-side electrical resistance tomography (ERT) by utilizing theoretical sensitivity analysis: Experimental validation and application to cement mortar. In: Journal of Building Engineering, v. 84 (May 2024).
- (2023): Effects of adding short fibers on impact resistance of glass textile reinforced cementitious composites under direct tension. In: Construction and Building Materials, v. 379 (May 2023).
- (2023): Feasibility of hybrid waste fishing net textile and fiber reinforced cementitious composites in strengthening concrete and retrofitting damaged concrete. In: Journal of Building Engineering, v. 74 (September 2023).
- (2012): Effect of grain size on the mechanical properties and crack formation of HPFRCC containing deformed steel fibers. In: Cement and Concrete Research, v. 42, n. 5 (May 2012).
- (2023): Experiments and prediction of direct tensile resistance of strain-hardening steel-fibre-reinforced concrete. In: Magazine of Concrete Research, v. 75, n. 15 (August 2023).
- (2023): Effects of temperature and humidity on self-stress sensing capacity of smart concrete blocks. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Effects of nanoparticles on the tensile behavior of ultra-high-performance fiber-reinforced concrete at high strain rates. In: Journal of Building Engineering, v. 63 (January 2023).
- (2021): Effects of cement particle distribution on the hydration process of cement paste in three-dimensional computer simulation. In: Construction and Building Materials, v. 311 (December 2021).
- (2021): Effects of corrosion level and inhibitor on pullout behavior of deformed steel fiber embedded in high performance concrete. In: Construction and Building Materials, v. 280 (April 2021).
- (2022): Dynamic increase factors for fiber-reinforced cement composites: A review. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Dynamic shear response of ultra-high-performance fiber-reinforced concretes under impact loading. In: Structures, v. 41 (July 2022).
- (2022): Different electrical voltage responses of cement composites under forward and backward current directions. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2021): Detecting embedded rebar in cement mortar by frequency-difference electrical resistance tomography. In: Automation in Construction, v. 132 (December 2021).
- (2021): Effects of different grips and surface treatments of textile on measured direct tensile response of textile reinforced cementitious composites. In: Composite Structures, v. 278 (December 2021).
- (2021): Development of a smart concrete block with an eccentric load sensing capacity. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Experimental evaluation on the seismic performance of reinforced concrete bridge columns with high strength reinforcement. In: Structure and Infrastructure Engineering, v. 18, n. 9 (March 2021).
- (2021): Enhancing self-stress sensing ability of smart ultra-high performance concretes under compression by using nano functional fillers. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Dynamic fracture toughness of ultra‐high‐performance fiber‐reinforced concrete under impact tensile loading. In: Structural Concrete, v. 22, n. 3 (April 2021).
- (2008): Comparative flexural behavior of four fiber reinforced cementitious composites. In: Cement and Concrete Composites, v. 30, n. 10 (November 2008).
- (2021): Enhancing impact resistance of hybrid ultra-high-performance fiber-reinforced concretes through strategic use of polyamide fibers. In: Construction and Building Materials, v. 271 (February 2021).
- (2021): Feasibility study on use of waste fishing nets as continuous reinforcements in cement-based matrix. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Detecting crack and damage location in self-sensing fiber reinforced cementitious composites. In: Construction and Building Materials, v. 240 (April 2020).
- (2020): Characterizing the electro-mechanical response of self-sensing steel-fiber-reinforced cementitious composites. In: Construction and Building Materials, v. 240 (April 2020).
- (2018): Effects of ageing and storage conditions on the interfacial bond strength of steel fibers in mortars. In: Construction and Building Materials, v. 170 (May 2018).
- (2018): Direct tensile responses of aramid fiber reinforced cementitious composites and textile reinforced cementitious composites with 3D spacer fabric at high strain rates. In: Construction and Building Materials, v. 168 (April 2018).
- (2011): Comparative flexural behavior of Hybrid Ultra High Performance Fiber Reinforced Concrete with different macro fibers. In: Construction and Building Materials, v. 25, n. 11 (November 2011).
- (2013): Effect of sand grain size and sand-to-cement ratio on the interfacial bond strength of steel fibers embedded in mortars. In: Construction and Building Materials, v. 47 (October 2013).
- (2016): Direct tensile behavior of shape-memory-alloy fiber-reinforced cement composites. In: Construction and Building Materials, v. 102 (January 2016).
- (2017): Effect of matrix cracking on electrical resistivity of high performance fiber reinforced cementitious composites in tension. In: Construction and Building Materials, v. 156 (December 2017).
- (2015): Crack-closing of cement mortar beams using NiTi cold-drawn SMA short fibers. In: Smart Materials and Structures, v. 24, n. 1 (January 2015).
Structurae cooperates with
