Hideki Kikumoto 
- (2024): Detector configuration optimization method considering response time for spatial source parameter estimation in complex urban wind environment. In: Building and Environment, v. 265 (November 2024).
- (2024): Data extension of high-resolution wind speed database by fusing meteorological observation and local objective analysis data with POD–LSE. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 252 (September 2024).
- (2024): Cross-sensor domain adaptation for data-driven correction of pedestrian level wind measurement in urban environments using cup anemometers. In: Sustainable Cities and Society, v. 106 (July 2024).
- (2024): Effect of wind direction on natural ventilation in a multiple-room house via field measurements and numerical simulations. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 248 (May 2024).
- (2024): CFD simulation of pumping ventilation with two asymmetrically arranged openings on the rear wall in a three-story isolated building. In: Building and Environment, v. 256 (May 2024).
- (2023): Comparison of pollen indoor/outdoor ratios during off-peak and peak periods in Japan. In: Building and Environment, v. 246 (December 2023).
- (2024): Detector configuration optimization based on wind tunnel tests using normalized adjoint concentration gradient for urban spatial source parameters estimation. In: Building and Environment, v. 248 (January 2024).
- (2023): CFD simulation of pumping ventilation in a three-story isolated building with internal partitioning: Effects of partition widths, heights and locations. In: Building Simulation, v. 17, n. 2 (December 2023).
- (2023): Effects of sensor configuration optimization on airflow estimation in urban environment: A case study with a building group model. In: Sustainable Cities and Society, v. 98 (November 2023).
- (2023): Estimation of instantaneous airflow distribution in cubic building group model using multi-time-delay LSE-POD. In: Building and Environment, v. 243 (September 2023).
- (2023): Estimation of the point source parameters by the adjoint equation in the time-varying atmospheric environment with unknown turn-on time. In: Building and Environment, v. 230 (February 2023).
- (2022): Data-driven calibration of cup anemometer based on field measurements and artificial neural network for wind measurement around buildings. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 231 (December 2022).
- (2022): Estimation of airflow distribution in cubic building group model using POD-LSE and limited sensors. In: Building and Environment, v. 221 (August 2022).
- (2022): Comprehensive validation of experimental and numerical natural ventilation predictions based on field measurement with experimental house. In: Building and Environment, v. 207 (January 2022).
- (2021): Experimental measurements of airflow features and velocity distribution exhaled from sneeze and speech using particle image velocimetry. In: Building and Environment, v. 205 (November 2021).
- (2021): Eulerian RANS simulations of near-field pollutant dispersion around buildings using concentration diffusivity limiter with travel time. In: Building and Environment, v. 202 (September 2021).
- (2021): Boundary layer wind tunnel modeling experiments on pumping ventilation through a three-story reduce-scaled building with two openings. In: Building and Environment, v. 202 (September 2021).
- (2021): Effects of wall function model in lattice Boltzmann method-based large-eddy simulation on built environment flows. In: Building and Environment, v. 195 (May 2021).
- (2021): Extended standard effective temperature index for water-misting environment. In: Building and Environment, v. 190 (March 2021).
- (2021): Development of probabilistic assessment framework for pedestrian wind environment using Bayesian technique. In: Building and Environment, v. 187 (January 2021).
- (2021): Construction of urban turbulent flow database with wavelet-based compression: A study with large-eddy simulation of flow and dispersion in block-arrayed building group model. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 208 (January 2021).
- (2016): Effect of climate change on building cooling loads in Tokyo in the summers of the 2030s using dynamically downscaled GCM data. In: Energy and Buildings, v. 114 (February 2016).
- (2016): Effect of diurnal variation in wind velocity profiles on ventilation performance estimates. In: Energy and Buildings, v. 130 (October 2016).
- (2020): Analysis of turbulent structures around a rectangular prism building model using spectral proper orthogonal decomposition. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 206 (November 2020).
- (2020): Comparison of winter air infiltration and its influences between large-space and normal-space buildings. In: Building and Environment, v. 184 (October 2020).
- (2020): Development of physiological human model considering mist wettedness for mist-spraying environments. In: Building and Environment, v. 180 (August 2020).
- (2020): Evaluation of mist-spraying environment on thermal sensations, thermal environment, and skin temperature under different operation modes. In: Building and Environment, v. 168 (January 2020).
- (2019): Environmental index for evaluating thermal sensations in a mist spraying environment. In: Building and Environment, v. 161 (August 2019).
- (2018): Evaluation of k-ε Reynolds stress modeling in an idealized urban canyon using LES. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 175 (April 2018).
- (2018): Consistency of mean wind speed in pedestrian wind environment analyses: Mathematical consideration and a case study using large-eddy simulation. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 173 (February 2018).
Structurae cooperates with
