0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Markus Kettler

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Kettler, Markus / Zauchner, Paul / Jungwirth, Michael / Kampleitner, Andreas / Unterweger, Harald (2024): Experimentelle und numerische Untersuchungen der lokalen Spannungen in Kranbahnträgern nahe Quersteifen. In: Stahlbau, v. 93, n. 4 (11 March 2024).

    https://doi.org/10.1002/stab.202300084

  2. Zauchner, Paul / Kettler, Markus / Unterweger, Harald (2023): Insights into the occurrence of transverse bending stresses in web plates of crane runway girders. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2526

  3. Kettler, Markus / Euler, Mathias / Eibl, Sebastian (2023): Bemessung geklemmter Kranschienen mit Fußflansch (Form A). In: Stahlbau, v. 92, n. 10 (October 2023).

    https://doi.org/10.1002/stab.202300028

  4. Kettler, Markus / Jurschitsch, Thomas / Unterweger, Harald (2023): Impact of rail joints on the local stresses in crane runway girders. In: Structures, v. 52 (June 2023).

    https://doi.org/10.1016/j.istruc.2023.04.046

  5. Unterweger, Harald / Kettler, Markus / Zauchner, Paul (2022): Calibrated design model for the compression capacity of angle members – Consideration of welded or bolted joint configurations. In: Steel Construction, v. 15, n. 4 (November 2022).

    https://doi.org/10.1002/stco.202200023

  6. Unterweger, Harald / Kettler, Markus / Zauchner, Paul (2022): Calibrated Design Model for the Compression Capacity of Angle Members with Welded Joints Including Accurate Joint Stiffness. In: ce/papers, v. 5, n. 4 (September 2022).

    https://doi.org/10.1002/cepa.1768

  7. Kettler, Markus / Unterweger, Harald (2022): Influence of Longitudinal Stiffeners on the Local Stresses in Crane Runway Girders ‐ Experimental and Numerical Investigations. In: ce/papers, v. 5, n. 4 (September 2022).

    https://doi.org/10.1002/cepa.1796

  8. Unterweger, Harald / Kettler, Markus / Zauchner, Paul (2022): Steifenlose Krafteinleitungen bei Biegeträgern – Interaktion mit Querkraft und Biegemoment sowie Implementierung im neuen Eurocode. In: Stahlbau, v. 91, n. 12 (December 2022).

    https://doi.org/10.1002/stab.202100102

  9. Kettler, Markus / Unterweger, Harald / Derler, Christoph (2021): A proposal for the local stresses in retrofitted crane runway girders due to eccentric wheel loading. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1393

  10. Unterweger, Harald / Kettler, Markus / Zauchner, Paul (2021): Bolted angle members in compression –new design model including joint stiffness. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1538

  11. Kettler, Markus / Unterweger, Harald / Zauchner, Paul (2021): Design model for bolted angle members in compression including joint stiffness. In: Journal of Constructional Steel Research, v. 184 (September 2021).

    https://doi.org/10.1016/j.jcsr.2021.106778

  12. Gérard, Lucile / Li, Liya / Kettler, Markus / Boissonnade, Nicolas (2021): Steel I-sections resistance under compression or bending by the Overall Interaction Concept. In: Journal of Constructional Steel Research, v. 182 (July 2021).

    https://doi.org/10.1016/j.jcsr.2021.106644

  13. Kettler, Markus / Unterweger, Harald / Ebner, Dieter (2021): Lokale Spannungen in Kranbahnträgern mit Längssteifen. Experimentelle und numerische Untersuchungen. In: Stahlbau, v. 90, n. 4 (April 2021).

    https://doi.org/10.1002/stab.202000069

  14. Unterweger, Harald / Kettler, Markus / Zauchner, Paul (2021): Bemessungsmodell für die Drucktragfähigkeit geschraubter Winkelprofile mit Erfassung baupraktischer Anschlusssteifigkeiten. In: Stahlbau, v. 90, n. 3 (March 2021).

    https://doi.org/10.1002/stab.202000053

  15. Kettler, Markus / Unterweger, Harald (2019): Laboratory tests on a real crane runway girder with welded box section and eccentric wheel loading. In: ce/papers, v. 3, n. 3-4 (September 2019).

    https://doi.org/10.1002/cepa.1095

  16. Kettler, Markus / Zauchner, Paul / Unterweger, Harald (2020): Determination of wheel loads from runway cranes based on rail strain measurement. In: Engineering Structures, v. 213 (June 2020).

    https://doi.org/10.1016/j.engstruct.2020.110546

  17. Kettler, Markus / Kiem, Franz / Unterweger, Harald (2020): Local stresses in retrofitted crane runway girders with boxed upper flange due to eccentric wheel loading. In: Structures, v. 25 (June 2020).

    https://doi.org/10.1016/j.istruc.2020.03.024

  18. Kettler, Markus / Unterweger, Harald / Harringer, Thomas (2019): Appropriate spring stiffness models for the end supports of bolted angle compression members. Selected paper from the SDSS 2019 special session TC8 – Structural Stability. In: Steel Construction, v. 12, n. 4 (November 2019).

    https://doi.org/10.1002/stco.201900028

  19. Gérard, Lucile / Li, Liya / Kettler, Markus / Boissonnade, Nicolas (2019): Recommendations on the geometrical imperfections definition for the resistance of I-sections. In: Journal of Constructional Steel Research, v. 162 (November 2019).

    https://doi.org/10.1016/j.jcsr.2019.105716

  20. Kettler, Markus / Derler, Christoph / Schörghofer, Andreas / Macho, Christina / Unterweger, Harald (2019): Laboratory and numerical tests on real crane runway girder with box section. In: Journal of Constructional Steel Research, v. 160 (September 2019).

    https://doi.org/10.1016/j.jcsr.2019.06.002

  21. Unterweger, Harald / Taras, Andreas / Loschan, Sarah / Kettler, Markus (2017): Influence of imperfections on the stability of beams with intermediate flexible supports. In: Journal of Constructional Steel Research, v. 136 (September 2017).

    https://doi.org/10.1016/j.jcsr.2017.05.008

  22. Kettler, Markus / Taras, Andreas / Unterweger, Harald (2017): Member capacity of bolted steel angles in compression – Influence of realistic end supports. In: Journal of Constructional Steel Research, v. 130 (March 2017).

    https://doi.org/10.1016/j.jcsr.2016.11.021

  23. Kettler, Markus / Kampleitner, Andreas / Novak, Friedrich / Mandl, Andreas / Unterweger, Harald (2017): Local stresses in webs of crane runway girders: Tests and numerical calculations. In: Journal of Constructional Steel Research, v. 139 (December 2017).

    https://doi.org/10.1016/j.jcsr.2017.09.016

  24. Kettler, Markus / Lichtl, Gerit / Unterweger, Harald (2019): Experimental tests on bolted steel angles in compression with varying end supports. In: Journal of Constructional Steel Research, v. 155 (April 2019).

    https://doi.org/10.1016/j.jcsr.2018.12.030

  25. Unterweger, Harald / Kettler, Markus / Loschan, Sarah (2017): Biegedrillknicken von Trägern - Effekte aus nachgiebigen Zwischenhaltungen an nur einem Gurt. In: ce/papers, v. 1, n. 5-6 (December 2017).

    https://doi.org/10.1002/cepa.567

  26. Kettler, Markus / Unterweger, Harald (2017): 05.21: Bolted steel angles in compression: Influence of realistic end supports. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.162

  27. Unterweger, Harald / Kettler, Markus / Loschan, Sarah (2017): 05.14: Lateral torsional buckling of steel beams: Effect of discrete flexible intermediate supports at the upper flange. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.155

  28. Unterweger, Harald / Kettler, Markus / Loschan, Sarah (2017): Biegedrillknick-Tragverhalten von Trägern mit nachgiebigen Zwischenabstützungen an nur einem Gurt. In: Stahlbau, v. 86, n. 5 (May 2017).

    https://doi.org/10.1002/stab.201710485

  29. Unterweger, Harald / Kettler, Markus (2014): Momententragfähigkeit schlanker Biegeträger - Einfluss des flanschinduzierten Stegblechbeulens. In: Stahlbau, v. 83, n. 1 (January 2014).

    https://doi.org/10.1002/stab.201410129

  30. Unterweger, Harald / Kettler, Markus (2013): Einzelfeldbeulen - Wirklich große Unterschiede zwischen Eurocode EN 1993-1-5 und DIN 18800-3?. In: Stahlbau, v. 82, n. 8 (August 2013).

    https://doi.org/10.1002/stab.201310074

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine