Syed Minhaj Saleem Kazmi 
- (2024): Improving carbonation resistance, strength, and microstructure of concrete through compression casting. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): A Reliability-Based Design Approach for the Flexural Resistance of Compression Yielded Fibre-Reinforced Polymer (FRP)-Reinforced Concrete Beams. In: Buildings, v. 14, n. 8 (23 July 2024).
- (2024): Mitigating the brittle behavior of compression cast concrete using polypropylene fibers. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Bond Stress Behavior of a Steel Reinforcing Bar Embedded in Geopolymer Concrete Incorporating Natural and Recycled Aggregates. In: Infrastructures, v. 9, n. 6 (28 May 2024).
- (2024): Joint Behavior of Full-Scale Precast Concrete Pipe Infrastructure: Experimental and Numerical Analysis. In: Infrastructures, v. 9, n. 4 (9 April 2024).
- (2024): Investigation of electromagnetic interference shielding performance of ultra-high-performance mortar incorporating single-walled carbon nanotubes and steel fiber. In: Journal of Building Engineering, v. 89 (July 2024).
- (2023): Experimental and Analytical Investigations on Shear Performance of Ambient-Cured Reinforced Geopolymer Concrete Beams. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Shear Behavior of Geopolymer Concrete Slender Beams. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Development of unified elastic modulus model of natural and recycled aggregate concrete for structural applications. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Recycling of metallurgical wastes in ceramics: A sustainable approach. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Influence of micro Fe2O3 and MgO on the physical and mechanical properties of the zeolite and kaolin based geopolymer mortar. In: Journal of Building Engineering, v. 52 (July 2022).
- (2021): Evolutionary artificial intelligence approach for performance prediction of bio-composites. In: Construction and Building Materials, v. 290 (July 2021).
- (2022): Development of a novel compressive strength design equation for natural and recycled aggregate concrete through advanced computational modeling. In: Journal of Building Engineering, v. 55 (September 2022).
- (2017): Improving the mechanical performance of cement composites by carbon nanotubes addition. In: Procedia Structural Integrity, v. 3 ( 2017).
- (2022): Influence of off-spec fly ash and surfactant-coated nano-iron-oxide on the fresh and hardened properties of cement pastes: An exploratory study. In: Journal of Building Engineering, v. 48 (May 2022).
- (2021): Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Feasibility of using clay-free bricks manufactured from water treatment sludge, glass, and marble wastes: An exploratory study. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): A study on magnesium phosphate cement mortars reinforced by polyvinyl alcohol fibers. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Synergistic effect of rice husk, glass and marble sludges on the engineering characteristics of eco-friendly bricks. In: Journal of Building Engineering, v. 42 (October 2021).
- (2021): Study of a new capillary active bio-insulation material by hygrothermal simulation of multilayer wall. In: Energy and Buildings, v. 234 (March 2021).
- (2021): Axial stress-strain performance of steel spiral confined acetic acid immersed and mechanically rubbed recycled aggregate concrete. In: Journal of Building Engineering, v. 34 (February 2021).
- (2021): Investigation of thermal performance of concrete incorporating different types of recycled coarse aggregates. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Effect of recycled aggregate treatment techniques on the durability of concrete: A comparative evaluation. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Experimental study of fibre-reinforced interlocking mud bricks under compressive test. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 173, n. 4 (August 2020).
- (2020): Development of a unified model to predict the axial stress–strain behavior of recycled aggregate concrete confined through spiral reinforcement. In: Engineering Structures, v. 218 (September 2020).
- (2019): Suitability of Gini moraines as natural pozzolanic material for Diamer Basha dam project. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 172, n. 4 (August 2019).
- (2017): Efficiency of waste marble powder in controlling alkali–silica reaction of concrete: A sustainable approach. In: Construction and Building Materials, v. 154 (November 2017).
- (2017): Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction. In: Construction and Building Materials, v. 148 (September 2017).
- (2018): Role of test method in detection of alkali–silica reactivity of concrete aggregates. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 171, n. 5 (October 2018).
- (2018): Effect of macro-synthetic fibers on the fracture energy and mechanical behavior of recycled aggregate concrete. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
