Bohumil Kasal 
- (2024): Freeze-thaw, chloride penetration and carbonation resistance of natural and recycled aggregate concrete containing rice husk ash as replacement of cement. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Bending behavior and bond analysis on adhesively bonded glulam-concrete panels fabricated with wet bonding technique. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Degradation Mechanism of the Wood-Cell Wall Surface in a Cement Environment Measured by Atomic Force Microscopy. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (July 2023).
- (2023): Flexural behaviour of wood beams strengthened by flax-glass hybrid FRP subjected to hygrothermal and weathering exposures. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): The immediate and short-term degradation of the wood surface in a cement environment measured by AFM. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): The effect of adhesive amount and type on failure mode and shear strength of glued timber-concrete joints. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Durability of epoxy and polyurethane bonded timber-hybrid FRP joints under hygrothermal and weathering conditions. In: Journal of Building Engineering, v. 58 (October 2022).
- (2021): Interfacial bond strength of epoxy and PUR adhesively bonded timber-concrete composite joints manufactured in dry and wet processes. In: Construction and Building Materials, v. 311 (December 2021).
- (2022): Bond behaviour between flax-glass hybrid fibre reinforced epoxy composite and laminated veneer lumber joints. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): Bond behaviour and thermal stability of flax/glass hybrid fibre reinforced polymer–timber structures connected by polyurethane. In: Construction and Building Materials, v. 322 (March 2022).
- (2018): Flexural behavior of U-shape FRP profile-RC composite beams with inner GFRP tube confinement at concrete compression zone. In: Composite Structures, v. 184 (January 2018).
- (2016): Behavior of glass and carbon FRP tube encased recycled aggregate concrete with recycled clay brick aggregate. In: Composite Structures, v. 155 (November 2016).
- (2016): Behavior of hybrid GFRP–perforated-steel tube-encased concrete column under uniaxial compression. In: Composite Structures, v. 142 (May 2016).
- (2020): Behavior of adhesively bonded engineered wood – Wood chip concrete composite decks: Experimental and analytical studies. In: Construction and Building Materials, v. 247 (June 2020).
- (2020): Interfacial bond behavior between wood chip concrete and engineered timber glued by various adhesives. In: Construction and Building Materials, v. 238 (March 2020).
- (2016): Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites. In: Construction and Building Materials, v. 112 (June 2016).
- (2016): Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties. In: Construction and Building Materials, v. 127 (November 2016).
- (2017): Behavior of flax FRP tube encased recycled aggregate concrete with clay brick aggregate. In: Construction and Building Materials, v. 136 (April 2017).
- (2017): Impact behavior of concrete columns confined by both GFRP tube and steel spiral reinforcement. In: Construction and Building Materials, v. 131 (January 2017).
- (2017): Behavior of polyester FRP tube encased recycled aggregate concrete with recycled clay brick aggregate: Size and slenderness ratio effects. In: Construction and Building Materials, v. 154 (November 2017).
- (2017): Experimental performance of reinforced double H-block masonry shear walls under cyclic loading. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2013): Experimental and analytical investigation of crack development in composite reinforced laminated arch. In: Materials and Structures, v. 46, n. 1-2 (January 2013).
- (2018): Dynamic material properties of wood subjected to low-velocity impact. In: Materials and Structures, v. 51, n. 3 (June 2018).
- (2010): Dynamically loaded light-frame wood stud walls: experimental verification of an analytical model. In: Materials and Structures, v. 43, n. 9 (November 2010).
- (2014): In situ assessment of structural timber using stress-wave measurements. In: Materials and Structures, v. 47, n. 5 (May 2014).
- (2014): In situ assessment of structural timber using non-destructive techniques. In: Materials and Structures, v. 47, n. 5 (May 2014).
- (2014): In situ assessment of structural timber using semi-destructive techniques. In: Materials and Structures, v. 47, n. 5 (May 2014).
- (1992): Incorporating Load Sharing in Shear Wall Design of Light‐Frame Structures. In: Journal of Structural Engineering (ASCE), v. 118, n. 12 (December 1992).
- (2014): Heavy Laminated Timber Frames with Rigid Three-Dimensional Beam-to-Column Connections. In: Journal of Performance of Constructed Facilities (ASCE), v. 28, n. 6 (December 2014).
Structurae cooperates with
