Ali Karrech 
- (2017): CFRP strengthening and rehabilitation of corroded steel pipelines under direct indentation. In: Thin-Walled Structures, v. 119 (October 2017).
- (2019): Behaviour and design of rubberised concrete filled steel tubes under combined loading conditions. In: Thin-Walled Structures, v. 139 (June 2019).
- (2024): Cost Benefits of Net Zero Energy Homes in Australia. In: Buildings, v. 14, n. 4 (27 March 2024).
- (2024): Non-linear vibration of free spanning subsea pipelines with multi-dimensional mid-plane stretching. In: Engineering Structures, v. 301 (February 2024).
- (2021): Development of ECO-UHPC with very-low-C3A cement and ground granulated blast-furnace slag. In: Construction and Building Materials, v. 284 (May 2021).
- (2021): High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Mechanical properties and chloride penetration resistances of very-low-C3A cement based SC-UHP-SFRCs incorporating metakaolin and slag. In: Construction and Building Materials, v. 341 (July 2022).
- (2022): Energy and thermal performance of a typical rammed earth residential building in Western Australia. In: Energy and Buildings, v. 260 (April 2022).
- (2021): Experimental and Analytical Study on Geomechanical Behavior of Biocemented Sand. In: International Journal of Geomechanics, v. 21, n. 8 (August 2021).
- (2021): ECO-UHPC with High-Volume Class-F Fly Ash: New Insight into Mechanical and Durability Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (July 2021).
- (2017): Evaluating Force Distributions within Virtual Uncemented Mine Backfill Using Discrete Element Method. In: International Journal of Geomechanics, v. 17, n. 7 (July 2017).
- (2020): Closed-Form Solution to the Poromechanics of Deep Arbitrary-Shaped Openings Subjected to Rock Mass Alteration. In: International Journal of Geomechanics, v. 20, n. 12 (December 2020).
- (2019): Glass fibre-reinforced polymer circular alkali-activated fly ash/slag concrete members under combined loading. In: Engineering Structures, v. 199 (November 2019).
- (2020): The critical behaviour of finite thickness lining systems in tunnels. In: European Journal of Environmental and Civil Engineering, v. 26, n. 8 (September 2020).
- (2020): Curing Conditions of Alkali-Activated Fly Ash and Slag Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 6 (June 2020).
- (2020): Circular Concrete Columns and Beams Reinforced with GFRP Bars and Spirals under Axial, Eccentric, and Flexural Loading. In: Journal of Composites for Construction, v. 24, n. 3 (June 2020).
- (2020): Experimental investigation on lightweight rubberized concrete beams strengthened with BFRP sheets subjected to impact loads. In: Engineering Structures, v. 205 (February 2020).
- (2020): Development of high strength one-part geopolymer mortar using sodium metasilicate. In: Construction and Building Materials, v. 236 (March 2020).
- (2018): Investigation into the Nonlinear Time-History Analysis of CNT-Reinforced Concrete Column by a Multiscale Approach. In: International Journal of Civil Engineering, v. 18, n. 1 (December 2018).
- (2019): Behaviour and design of air-cured GFRP-reinforced geopolymer concrete square columns. In: Magazine of Concrete Research, v. 71, n. 19 (October 2019).
- (2019): Circular steel tubes filled with rubberised concrete under combined loading. In: Journal of Constructional Steel Research, v. 162 (November 2019).
- (2019): Modelling glass fibre-reinforced polymer reinforced geopolymer concrete columns. In: Structures, v. 20 (August 2019).
- (2020): Material and Glass Fibre Reinforced Polymer Bond Properties of Geopolymer Concrete. In: Magazine of Concrete Research, v. 72, n. 10 (May 2020).
- (2017): Green Concrete with High-Volume Fly Ash and Slag with Recycled Aggregate and Recycled Water to Build Future Sustainable Cities. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 2 (February 2017).
- (2018): Multi-scale Modeling Approach to Predict the Nonlinear Behavior of CNT-reinforced Concrete Columns Subjected to Service Loading. In: Structures, v. 14 (June 2018).
- (2018): Experiments and Finite Element Analysis of GFRP Reinforced Geopolymer Concrete Rectangular Columns Subjected to Concentric and Eccentric Axial Loading. In: Structures, v. 14 (June 2018).
- (2018): Experimental investigation of rubberised concrete-filled double skin square tubular columns under axial compression. In: Engineering Structures, v. 171 (September 2018).
- (2018): Experimental tests and design of rubberised concrete-filled double skin circular tubular short columns. In: Structures, v. 15 (August 2018).
- (2018): Dual cohesive elements for 3D modelling of synthetic fibre-reinforced concrete. In: Engineering Structures, v. 174 (November 2018).
- (2018): Image Processing and Machine Learning to investigate fibre distribution on fibre-reinforced shotcrete Round Determinate Panels. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
