Terje Kanstad 
- : Simplified modified tension chord model: An alternative crack width calculation model to Eurocode 2 and fib model codes. In: Structural Concrete.
- : Early‐age cracking due to restraint: Laboratory and field investigations on the predictive capacity of the simplified method in Annex D of the future EC2. In: Structural Concrete.
- (2024): Performance study of crack width calculation methods according to Eurocodes, fib model codes and the modified tension chord model. In: Structural Concrete, v. 25, n. 4 (August 2024).
- (2023): Load Effects of ASR-induced Expansion in Reinforced Concrete and Their Consequences for Structural Assessment. In: Nordic Concrete Research, v. 68, n. 1 (1 July 2023).
- (2023): Bonding property between fiber and cementitious matrix: A critical review. In: Construction and Building Materials, v. 378 (May 2023).
- (2020): Inspection and Assessment of Corrosion in Pretensioned Concrete Bridge Girders Exposed to Coastal Climate. In: Infrastructures, v. 5, n. 9 (September 2020).
- (2017): Comparison of tensile and compressive creep of fly ash concretes in the hardening phase. In: Cement and Concrete Research, v. 95 (May 2017).
- : Serviceability Limit States according to the new Eurocode 2 proposal: Description and justifications of the proposed changes. In: Hormigón y acero.
- (2023): Failure characteristics of reinforced concrete circular slabs subsequently subjected to fire exposure and static load: An experimental study. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2023): Corrosion‐induced damages and failures of posttensioned bridges: A literature review. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2022): Numerical investigation into the effects of corrosion on the shear performance of pretensioned bridge girders with cast-in-place slabs. In: Structures, v. 46 (December 2022).
- (2022): The cracking risk of hardening concrete exposed to realistic curing temperature regimes and restraint conditions – Experimental investigations of important parameters. In: Construction and Building Materials, v. 338 (July 2022).
- (2019): Floating concrete structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 9782883941342.
- (2022): Toward identifying the ASR-induced stresses from displacement measurements and crack observations—Demonstration on a beam bridge in Norway. In: Engineering Structures, v. 263 (July 2022).
- (2021): Load effects in reinforced concrete beam bridges affected by alkali–silica reaction—Constitutive modelling including expansion, cracking, creep and crushing. In: Engineering Structures, v. 245 (October 2021).
- (2021): Recommendations of RILEM TC 287-CCS: thermo-chemo-mechanical modelling of massive concrete structures towards cracking risk assessment. In: Materials and Structures, v. 54, n. 4 (2 July 2021).
- (2021): Experimental investigation on the structural response of RC slabs subjected to combined fire and blast. In: Structures, v. 31 (June 2021).
- (2021): Material Characterization Approach for Modeling High-Strength Concrete after Cooling from Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2018): Crack width calculation methods for large-scale concrete structures for the Ferry-Free E39. Presented at: IABSE Conference: Engineering the Developing World, Kuala Lumpur, Malaysia, 25-27 April 2018.
- (2019): Serviceability limit state design of large concrete structures: Impact on reinforcement amounts and consequences of design code ambiguity. In: Engineering Structures, v. 201 (December 2019).
- (2021): The effect of shrinkage reducing admixtures on drying shrinkage, autogenous deformation, and early age stress development of concrete. In: Structural Concrete, v. 22 (January 2021).
- (2020): Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices. In: Construction and Building Materials, v. 245 (June 2020).
- (2020): A numerical investigation of the cracking behaviour of reinforced-concrete tie elements. In: Magazine of Concrete Research, v. 72, n. 3 (February 2020).
- (2020): Analytical Calculation Model for Predicting Cracking Behavior of Reinforced Concrete Ties. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (February 2020).
- (2019): Durability of pretensioned concrete girders in coastal climate bridges: Basis for better maintenance and future design. In: Structural Concrete, v. 20, n. 6 (December 2019).
- (2019): Modified cracked membrane model for consistent crack width predictions of reinforced concrete structures subjected to in-plane loading. In: Engineering Structures, v. 196 (October 2019).
- (2018): Experimental and theoretical investigation of crack width calculation methods for RC ties. In: Structural Concrete, v. 19, n. 5 (October 2018).
- (2019): A review of literature and code requirements for the crack width limitations for design of concrete structures in serviceability limit states. In: Structural Concrete, v. 20, n. 2 (April 2019).
- (2016): Importance of quantification of steel fibre orientation for residual flexural tensile strength in FRC. In: Materials and Structures, v. 49, n. 9 (September 2016).
- (2016): Influence of reinforcing bar layout on fibre orientation and distribution in slabs cast from fibre-reinforced self-compacting concrete (FRSCC). In: Structural Concrete, v. 17, n. 2 (April 2016).
Structurae cooperates with
