Byung Wan Jo 
- (2013): 투수성 GFRP 보강 복합체 개발 및 투수성에 대한 연구 (A Study on the Development and Performance Evaluation of Permeable GFRP Strengthening Panel for RC Structure). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 17, n. 3 (May 2013).
- (2013): 콘크리트 구조물의 친환경 내구성 도장에 관한 기초 연구 (A Study on the Eco-Friendly Durable Pre-Painting for Concrete Structure). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 17, n. 2 (March 2013).
- (2012): Steel Strap으로 횡구속된 무철근 바닥판의 정적 및 피로거동 특성 연구 (A Study on Static and Fatigue Behavior of Restrained Concrete Decks without Rebar by Steel Strap). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 16, n. 5 (September 2012).
- (2012): 유비쿼터스 센서 네트워크 기반 지능형 교량 시스템 개발 (Development of Ubiquitous Sensor Network Intelligent Bridge System). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 16, n. 1 (January 2012).
- (2012): 제올라이트 콘크리트의 기초 물성에 관한 실험적 연구 (An Experimental Study on the Fundamental Properties of Zeolite Concrete). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 16, n. 1 (January 2012).
- (2011): 교량의 수직처짐 측정을 위한 유비쿼터스 무선경사센서 활용연구 (A Study on the Ubiquitous Wireless Tilt Sensors's Application for Measuring Vertical Deflection of Bridge). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 15, n. 3 (May 2011).
- (2000): Prediction of Ozone Formation Based on Neural Network. In: Journal of Environmental Engineering (ASCE), v. 126, n. 8 (August 2000).
- (2011): Design criteria of wind barriers for traffic -Part 2: decision making process. In: Wind & Structures, v. 14, n. 1 (January 2011).
- (2020): Development of a 3D Printer for Concrete Structures: Laboratory Testing of Cementitious Materials. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 January 2020).
- (2019): Durability Study of Silica Fume-mortar exposed to the Combined Sulfate and Chloride-rich Solution. In: KSCE Journal of Civil Engineering, v. 23, n. 2 (January 2019).
- (2014): Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete. In: Construction and Building Materials, v. 70 (November 2014).
- (2015): Effectiveness of carbonated lime as a raw material in producing a CO2-stored cementitious material by the hydrothermal method. In: Construction and Building Materials, v. 95 (October 2015).
- (2015): Prediction of the curing time to achieve maturity of the nano cement based concrete using the Weibull distribution model. In: Construction and Building Materials, v. 84 (June 2015).
- (2015): Hydrogen-rich water revealed benefits in controlling the physical and mechanical performances of cement mortar. In: Construction and Building Materials, v. 100 (December 2015).
- (2017): Investigation of the acid and sulfate resistance performances of hydrogen-rich water based mortars. In: Construction and Building Materials, v. 137 (April 2017).
- (2017): Prediction of the Failure Stress of Hydrogen-rich Water Based Cement Mortar Using the Weibull Distribution Model. In: KSCE Journal of Civil Engineering, v. 22, n. 5 (August 2017).
- (2005): Wind characteristics of existing long span bridge based on measured data. In: KSCE Journal of Civil Engineering, v. 9, n. 3 (May 2005).
- (2007): Investigations on the development of powder concrete with nano-SiO2 particles. In: KSCE Journal of Civil Engineering, v. 11, n. 1 (January 2007).
- (2006): Finite element analysis for setting shrinkage stress of recycled-PET polymer concrete. In: KSCE Journal of Civil Engineering, v. 10, n. 4 (July 2006).
- (2016): Efficacy of alkali-treated jute as fibre reinforcement in enhancing the mechanical properties of cement mortar. In: Materials and Structures, v. 49, n. 3 (March 2016).
Structurae cooperates with
