Tidarut Jirawattanasomkul 
- (2025): Performance of square masonry columns retrofitted with NSM steel and GFRP reinforcement under axial compression. In: Construction and Building Materials, v. 458 (January 2025).
- (2024): Stress-strain behaviour of pre-damaged concrete confined with natural fibre reinforced polymer. In: Structures, v. 69 (November 2024).
- (2024): Experimental study and modeling of unidirectional jute FRP for concrete confinement. In: Structures, v. 67 (September 2024).
- (2024): Cyclic performance of non‐ductile reinforced concrete columns retrofitted by partial steel plate jacketing: Experiment and numerical analysis. In: Structural Concrete, v. 25, n. 4 (August 2024).
- (2024): Field investigation and numerical analysis of horizontal cracking in ledge girders of post-tension concrete bridges. In: Engineering Structures, v. 307 (May 2024).
- (2024): Shear strength prediction for RC beams without shear reinforcement by neural network incorporated with mechanical interpretations. In: Engineering Structures, v. 298 (January 2024).
- (2023): Dynamic characteristic measurement of precast and cast in‐situ walls in abandoned high‐rise building using ambient and forced vibration methods. In: Structural Concrete, v. 24, n. 6 (2 November 2023).
- (2023): Flexural and shear behavior of ultra-high performance concrete segmental joints. In: Structures, v. 56 (October 2023).
- (2023): Use of polypropylene fibers extracted from recycled surgical face masks in cement mortar. In: Construction and Building Materials, v. 391 (August 2023).
- (2023): Effect of superabsorbent polymer and polypropylene fiber on mechanical performances of alkali-activated high-calcium fly ash mortar under ambient and elevated temperatures. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Improving shear deficiency of prestressed concrete sleepers by crack resisting stirrups. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2021): Failure Analysis of Dapped-End Cracking in Posttensioned Bridge Girder. In: Journal of Bridge Engineering (ASCE), v. 26, n. 11 (November 2021).
- (2020): Structural behaviour of pre-damaged reinforced concrete beams strengthened with natural fibre reinforced polymer composites. In: Composite Structures, v. 244 (July 2020).
- (2020): Effects of Heat Treatment on Mechanical Properties of Jute Fiber–Reinforced Polymer Composites for Concrete Confinement. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 12 (December 2020).
- (2019): Effect of natural fibre reinforced polymers on confined compressive strength of concrete. In: Construction and Building Materials, v. 223 (October 2019).
- (2014): Experimental Study on Shear Behavior of Reinforced-Concrete Members Fully Wrapped with Large Rupture-Strain FRP Composites. In: Journal of Composites for Construction, v. 18, n. 3 (June 2014).
- (2013): Prediction of the post-peak behavior of reinforced concrete columns with and without FRP-jacketing. In: Engineering Structures, v. 56 (November 2013).
- (2016): Experimental and numerical study of strengthening non-ductile RC columns with and without lap splice by Carbon Fiber Reinforced Polymer (CFRP) jacketing. In: Engineering Structures, v. 125 (October 2016).
Structurae cooperates with
