Weiliang Jin 
- (2024): Computational approach to the current and chloride ions distribution of reinforced concrete cathodic protection system. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Calculation of creep deformation of stiffness-degraded RC beams after strengthening with increased cross-section. In: Structures, v. 67 (September 2024).
- (2023): Intelligent design of limit states for recycled aggregate concrete filled steel tubular columns. In: Structures, v. 58 (December 2023).
- (2023): Creep Characterization of Concrete Suffering Initial Damage. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2023): Experimental and numerical study on the microstructure and chloride ion transport behavior of concrete-to-concrete interface. In: Construction and Building Materials, v. 367 (February 2023).
- (2023): Modeling of corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks. In: Magazine of Concrete Research, v. 75, n. 11 (June 2023).
- (2023): Experimental study on time-dependent DC resistivity of cement-based material considering microstructure and ion concentration. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Creep model of high-performance concrete at different loading ages. In: Construction and Building Materials, v. 357 (November 2022).
- (2021): Calculation of Deflection and Stress of Assembled Concrete Composite Beams under Shrinkage and Creep and Its Application in Member Design Optimization. In: KSCE Journal of Civil Engineering, v. 25, n. 9 (June 2021).
- (2021): Life-Cycle Cost Analysis of Deteriorating Civil Infrastructures Incorporating Social Sustainability. In: Journal of Infrastructure Systems, v. 27, n. 3 (September 2021).
- (2020): Effects of environmental Water-Level changes and bidirectional electromigration rehabilitation on durability of concrete. In: Construction and Building Materials, v. 265 (December 2020).
- (2021): Effect of U‐shaped anchorages on concrete cover separation in carbon fiber‐reinforced polymer‐strengthened beams with notches at the sheet end. In: Structural Concrete, v. 22, n. 1 (February 2021).
- (2020): Flexural performances of pre-stressed concrete piles reinforced with hybrid BFRP and steel bars. In: European Journal of Environmental and Civil Engineering, v. 26, n. 4 (March 2020).
- (2020): Determining the fatigue process in ribbed steel bars using piezomagnetism. In: Construction and Building Materials, v. 239 (April 2020).
- (2020): Deterioration of static mechanical properties of RC beams due to bond damage induced by electrochemical rehabilitation. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Inclusion of environmental impacts in life-cycle cost analysis of bridge structures. In: Sustainable and Resilient Infrastructure, v. 5, n. 4 (March 2019).
- (2019): Hydrogen embrittlement risk control of prestressed tendons during electrochemical rehabilitation based on bidirectional electro-migration. In: Construction and Building Materials, v. 213 (July 2019).
- (2011): Effect of External Loads on Chloride Transport in Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 7 (July 2011).
- (2015): Cracking Behavior of CFRP Laminate-Strengthened RC Beams with Premechanical and Postmechanical Environmental Damage. In: Journal of Composites for Construction, v. 19, n. 4 (August 2015).
- (2014): Experimental research on concrete strength prediction by Limpet pull-off test in China. In: International Journal of Structural Engineering, v. 5, n. 1 ( 2014).
- (2013): Bond behaviour of normal/recycled concrete and corroded steel bars. In: Construction and Building Materials, v. 48 (November 2013).
- (2016): Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface. In: Construction and Building Materials, v. 116 (July 2016).
- (2016): Investigation on concrete-PCM interface under elevated temperature: At material level and member level. In: Construction and Building Materials, v. 125 (October 2016).
- (2016): Modification of properties of reinforced concrete through nanoalumina electrokinetic treatment. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Crack propagation and flexural behaviour of RC beams under simultaneous sustained loading and steel corrosion. In: Construction and Building Materials, v. 151 (October 2017).
- (2011): Effect of freeze–thaw cycles on the stress–strain curves of unconfined and confined concrete. In: Materials and Structures, v. 44, n. 7 (August 2011).
- (2015): Early-Age Index Choosing for Long-Term Quality Evaluation of Concrete Structures. In: Advances in Structural Engineering, v. 18, n. 12 (December 2015).
- (2013): Experimental Study of Innovative Steel-Concrete Composite Beams under Hogging Moment. In: Advances in Structural Engineering, v. 16, n. 5 (May 2013).
- (2010): Influence of initial curing conditions and exposure environments on chloride migration in concrete using electrochemical method. In: Frontiers of Architecture and Civil Engineering in China, v. 4, n. 3 (August 2010).
- (2018): Hierarchical life-cycle design of reinforced concrete structures incorporating durability, economic efficiency and green objectives. In: Engineering Structures, v. 157 (February 2018).
Structurae cooperates with
