Jinyang Jiang 
- (2024): Assessing the performance and sustainability of ecological mortar with municipal solid waste incineration fly ash solidified by sulphoaluminate cement. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Correction: In situ visualization of water transport in cement mortar with an ultra-low w/b ratio under the coupling conditions of osmotic pressure, confining pressure, and temperature. In: Materials and Structures, v. 57, n. 7 (13 August 2024).
- (2024): Effect of Load-Temperature-Osmotic Coupling on Chloride Ion Transport in Ultrahigh-Performance Concrete: Experiments and Models. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2024): Early Corrosion Behavior of Cr10Mo1 Alloy Corrosion-Resistant Steel Bars in Seawater–Sea-Sand Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2024): Decomposition of complex interactions in graphene oxide-superplasticizer-cement composites and proposed guidelines for sample preparation and assessment. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Enhancing mechanical performance and durability of high strength mortar with incineration bottom ash via Al2O3 micro-powder: An experimental study. In: Journal of Building Engineering, v. 89 (July 2024).
- (2024): Deciphering the influence of superabsorbent polymers on cement hydration and portlandite formation. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): Convection-diffusion-electromigration coupled numerical simulation of water and chloride in cement-based materials. In: Construction and Building Materials, v. 426 (May 2024).
- (2024): Ethylene Vinyl Acetate Copolymer Emulsion-Modified Alkali-Activated Slag Repair Material: Mechanical Strength and Durability Linked to Microstructural Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (July 2024).
- (2024): Corrosion Resistance of Cr10Mo1 Alloy Corrosion-Resistant Steel in Seawater–Sea Sand Concrete Pore Solution. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (July 2024).
- (2023): Effect of stone powder content on the mechanical properties and microstructure of tunnel slag aggregate-based concrete. In: Construction and Building Materials, v. 388 (July 2023).
- (2023): Effect of Citric Acid-Modified Chitosan on Hydration Regulation and Mechanism of Composite Cementitious Material System. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Anti-corrosion Behavior of Al<sub>2</sub>O<sub>3</sub>@SiO<sub>2</sub> Composite Electrokinetic Nanoparticles on Reinforced Concrete. In: Journal of Advanced Concrete Technology, v. 21, n. 4 (19 April 2023).
- (2023): Effects of steel chips on the microstructure, mechanical property, and durability of ultra-high-performance concrete with high elastic modulus. In: Journal of Building Engineering, v. 72 (August 2023).
- (2018): Application of organic- and nanoparticle-modified foams in foamed concrete: Reinforcement and stabilization mechanisms. In: Cement and Concrete Research, v. 106 (April 2018).
- (2021): Atmospheric drying preparation and microstructure characterization of fly ash aerogel thermal insulation material with superhydrophobic. In: Construction and Building Materials, v. 303 (October 2021).
- (2018): Analytical and numerical modeling of elastic moduli for cement based composites with solid mass fractal model. In: Construction and Building Materials, v. 172 (May 2018).
- (2020): Effect of temperature on the capillary transport of sodium sulfate solution in calcium silicate hydrate nanopore: A molecular dynamics study. In: Construction and Building Materials, v. 231 (January 2020).
- (2013): Effect of measurement method and cracking on chloride transport in concrete. In: Computers and Concrete, v. 11, n. 4 (April 2013).
- (2011): Damage of concrete experiencing flexural fatigue load and closed freeze/thaw cycles simultaneously. In: Construction and Building Materials, v. 25, n. 5 (May 2011).
- (2015): Damage process of concrete subjected to coupling fatigue load and freeze/thaw cycles. In: Construction and Building Materials, v. 93 (September 2015).
- (2015): Effect of curing temperature on creep behavior of fly ash concrete. In: Construction and Building Materials, v. 96 (October 2015).
- (2016): Effect of fiber types on creep behavior of concrete. In: Construction and Building Materials, v. 105 (February 2016).
- (2016): Examination and modeling of fractality for pore-solid structure in cement paste: Starting from the mercury intrusion porosimetry test. In: Construction and Building Materials, v. 124 (October 2016).
- (2016): Chloride ions transport and adsorption in the nano-pores of silicate calcium hydrate: Experimental and molecular dynamics studies. In: Construction and Building Materials, v. 126 (November 2016).
- (2012): Damage of concrete subjected to simultaneous fatigue load and thermal effect. In: Magazine of Concrete Research, v. 64, n. 1 (January 2012).
- (2008): Cracking resistance performance of super vertical-distance pumped SFRC. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 2 (May 2008).
- (2016): Assessment of Structural Feature and Ionic Diffusivity of ITZ in Blended Cementitious Composites. In: Journal of Advanced Concrete Technology, v. 14, n. 7 ( 2016).
- (2018): The effect of water molecules on the structure, dynamics, and mechanical properties of sodium aluminosilicate hydrate (NASH) gel: A molecular dynamics study. In: Construction and Building Materials, v. 193 (December 2018).
- (2018): The effect of superhydrophobic nano-silica particles on the transport and mechanical properties of hardened cement pastes. In: Construction and Building Materials, v. 182 (September 2018).
Structurae cooperates with
