-
Carden, Lyle P. / Pekcan, Gokhan / Itani, Ahmad M. (2008): Investigation of Flange Local Bending Under Flexible Patch Loading. In: Engineering Journal, v. 45, n. 1 (March 2008).
https://doi.org/10.62913/engj.v45i1.926
-
Carden, Lyle P. / Garcia-Alvarez, Francisco / Itani, Ahmad M. / Buckle, Ian G. (2006): Cyclic Behavior of Single Angles for Ductile End Cross Frames. In: Engineering Journal, v. 43, n. 2 (June 2006).
https://doi.org/10.62913/engj.v43i2.875
-
Carden, Lyle P. / Itani, Ahmad M. / Buckle, Ian G. (2006): Cyclic Behavior of Buckling Restrained Braces for Ductile End Cross Frames. In: Engineering Journal, v. 43, n. 2 (June 2006).
https://doi.org/10.62913/engj.v43i2.874
-
Itani, Ahmad M. (1996): Future Use of Composite Steel-Concrete Columns in Highway Bridges. In: Engineering Journal, v. 33, n. 3 (September 1996).
https://doi.org/10.62913/engj.v33i3.665
-
Itani, Ahmad M. (2012): AASHTO LRFD Provisions for the Seismic Design of Steel Plate Girder Bridges. In: Engineering Journal, v. 49, n. 3 (September 2012).
https://doi.org/10.62913/engj.v49i3.1028
-
Carden, Lyle P. / Itani, Ahmad M. / Buckle, Ian G. (2002): Composite Action in Steel Girder Bridge Superstructures Subjected to Transverse Earthquake Loading. In: Transportation Research Record: Journal of the Transportation Research Board, v. 1814, n. 1 (January 2002).
https://doi.org/10.3141/1814-29
-
Monzon, Eric V. / Itani, Ahmad M. / Pekcan, Gokhan (2014): Seismic behavior and design of steel girder bridges with integral abutments. In: Bridge Structures, v. 10, n. 4 ( 2014).
https://doi.org/10.3233/brs-150080
-
Builes-Mejia, J. Camilo / Itani, Ahmad M. (2012): Improving the stability of bridge column rebar cages during construction. In: Bridge Structures, v. 8, n. 2 ( 2012).
https://doi.org/10.3233/brs-2012-0040
-
Vahedi, Masood / Ebrahimian, Hamed / Itani, Ahmad M. (2023): Experimental Investigation of U-Bolt Connectors for Application in Rebar Cages. In: Journal of Structural Engineering (ASCE), v. 149, n. 1 (January 2023).
https://doi.org/10.1061/jsendh.steng-11381
-
Abokifa, Mohamed / Moustafa, Mohamed A. / Itani, Ahmad M. (2021): Comparative structural behavior of bridge deck panels with polymer concrete and UHPC transverse field joints. In: Engineering Structures, v. 247 (November 2021).
https://doi.org/10.1016/j.engstruct.2021.113195
-
Wu, Suiwen / Buckle, Ian G. / Itani, Ahmad M. / Istrati, Denis (2019): Experimental Studies on Seismic Response of Skew Bridges with Seat-Type Abutments. I: Shake Table Experiments. In: Journal of Bridge Engineering (ASCE), v. 24, n. 10 (October 2019).
https://doi.org/10.1061/(asce)be.1943-5592.0001480
-
Wu, Suiwen / Buckle, Ian G. / Itani, Ahmad M. / Istrati, Denis (2019): Experimental Studies on Seismic Response of Skew Bridges with Seat-Type Abutments. II: Results. In: Journal of Bridge Engineering (ASCE), v. 24, n. 10 (October 2019).
https://doi.org/10.1061/(asce)be.1943-5592.0001469
-
Soroushian, Siavash / Maragakis, E. Manos / Zaghi, Arash E. / Rahmanishamsi, Esmaeel / Itani, Ahmad M. / Pekcan, Gokhan (2016): Response of a 2-story test-bed structure for the seismic evaluation of nonstructural systems. In: Earthquake Engineering and Engineering Vibration, v. 15, n. 1 (March 2016).
https://doi.org/10.1007/s11803-016-0302-8
-
Dusicka, Peter / Itani, Ahmad M. / Buckle, Ian G. (2004): Finite element investigation of steel built-up shear links subjected to inelastic deformations. In: Earthquake Engineering and Engineering Vibration, v. 3, n. 2 (December 2004).
https://doi.org/10.1007/bf02858234
-
Carden, Lyle P. / Pekcan, Gokhan / Itani, Ahmad M. (2007): Flange and web limit states in beams subjected to patch loading. In: Journal of Constructional Steel Research, v. 63, n. 1 (January 2007).
https://doi.org/10.1016/j.jcsr.2006.03.005
-
Dusicka, Peter / Itani, Ahmad M. / Buckle, Ian G. (2007): Cyclic response of plate steels under large inelastic strains. In: Journal of Constructional Steel Research, v. 63, n. 2 (February 2007).
https://doi.org/10.1016/j.jcsr.2006.03.006
-
Carden, Lyle P. / Buckle, Ian G. / Itani, Ahmad M. (2007): Transverse displacement capacity and stiffness of steel plate girder bridge superstructures for seismic loads. In: Journal of Constructional Steel Research, v. 63, n. 11 (November 2007).
https://doi.org/10.1016/j.jcsr.2007.01.004
-
Pekcan, Gokhan / Itani, Ahmad M. / Linke, Christin (2014): Enhancing seismic resilience using truss girder frame systems with supplemental devices. In: Journal of Constructional Steel Research, v. 94 (March 2014).
https://doi.org/10.1016/j.jcsr.2013.10.016
-
Itani, Ahmad M. / Lanaud, Christophe / Dusicka, Peter (2003): Analytical evaluation of built-up shear links under large deformations. In: Computers & Structures, v. 81, n. 8-11 (May 2003).
https://doi.org/10.1016/s0045-7949(03)00006-3
-
Itani, Ahmad M. / Bruneau, Michel / Carden, Lyle / Buckle, Ian G. (2004): Seismic Behavior of Steel Girder Bridge Superstructures. In: Journal of Bridge Engineering (ASCE), v. 9, n. 3 (May 2004).
https://doi.org/10.1061/(asce)1084-0702(2004)9:3(243)
-
Goel, Subhash C. / Itani, Ahmad M. (1994): Seismic‐Resistant Special Truss‐Moment Frames. In: Journal of Structural Engineering (ASCE), v. 120, n. 6 (June 1994).
https://doi.org/10.1061/(asce)0733-9445(1994)120:6(1781)
-
Goel, Subhash C. / Itani, Ahmad M. (1994): Seismic Behavior of Open‐Web Truss‐Moment Frames. In: Journal of Structural Engineering (ASCE), v. 120, n. 6 (June 1994).
https://doi.org/10.1061/(asce)0733-9445(1994)120:6(1763)
-
Dusicka, Peter / Itani, Ahmad M. / Buckle, Ian G. (2010): Cyclic Behavior of Shear Links of Various Grades of Plate Steel. In: Journal of Structural Engineering (ASCE), v. 136, n. 4 (April 2010).
https://doi.org/10.1061/(asce)st.1943-541x.0000131
-
Carden, Lyle P. / Itani, Ahmad M. / Buckle, Ian G. (2006): Seismic Performance of Steel Girder Bridges with Ductile Cross Frames Using Single Angle X Braces. In: Journal of Structural Engineering (ASCE), v. 132, n. 3 (March 2006).
https://doi.org/10.1061/(asce)0733-9445(2006)132:3(329)
-
Carden, Lyle P. / Itani, Ahmad M. / Buckle, Ian G. (2006): Seismic Performance of Steel Girder Bridges with Ductile Cross Frames Using Buckling-Restrained Braces. In: Journal of Structural Engineering (ASCE), v. 132, n. 3 (March 2006).
https://doi.org/10.1061/(asce)0733-9445(2006)132:3(338)
-
Carden, Lyle P. / Pekcan, Gokhan / Itani, Ahmad M. (2007): Web Yielding, Crippling, and Lateral Buckling under Post Loading. In: Journal of Structural Engineering (ASCE), v. 133, n. 5 (May 2007).
https://doi.org/10.1061/(asce)0733-9445(2007)133:5(665)
-
Mohebbi, Alireza / Saiidi, M. Saiid / Itani, Ahmad M. (2018): Shake Table Studies and Analysis of a PT-UHPC Bridge Column with Pocket Connection. In: Journal of Structural Engineering (ASCE), v. 144, n. 4 (April 2018).
https://doi.org/10.1061/(asce)st.1943-541x.0001997
-
Mohebbi, Alireza / Saiidi, M. Saiid / Itani, Ahmad M. (2018): Shake Table Studies and Analysis of a Precast Two-Column Bent with Advanced Materials and Pocket Connections. In: Journal of Bridge Engineering (ASCE), v. 23, n. 7 (July 2018).
https://doi.org/10.1061/(asce)be.1943-5592.0001247
-
Monzon, Eric V. / Buckle, Ian G. / Itani, Ahmad M. (2016): Seismic Performance and Response of Seismically Isolated Curved Steel I-Girder Bridge. In: Journal of Structural Engineering (ASCE), v. 142, n. 12 (December 2016).
https://doi.org/10.1061/(asce)st.1943-541x.0001594