Maura Imbimbo
- (2024): Optimization of the internal structure of 3D-printed components for architectural restoration. In: Frattura ed Integrità Strutturale, v. 18, n. 70 (15 August 2024).
- (2024): Proposal of a scissor-based model for the non-linear analysis of RC beam-column joints strengthened by FRP. In: Engineering Structures, v. 316 (October 2024).
- (2024): 3D-printing for the rehabilitation and health monitoring of structures with FBG: Experimental tests. In: Construction and Building Materials, v. 416 (February 2024).
- (2024): Fragility curves for the seismic assessment of masonry buildings in historic centres prone to out-of-plane failure modes. In: Bulletin of Earthquake Engineering, v. 22, n. 4 (January 2024).
- (2023): Exploring new frontiers in gridshell design: The FreeGrid benchmark. In: Structures, v. 58 (December 2023).
- (2023): Modelling of exterior RC beam-column joints for the seismic assessment of RC-frames. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Fragility curves for residential unreinforced masonry buildings prone to out-of-plane mechanisms: the case of the historical center of Sora. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Design optimization of gridshells equipped with pre-tensioned rods. In: Journal of Building Engineering, v. 52 (July 2022).
- (2018): Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems. In: Procedia Structural Integrity, v. 9 ( 2018).
- (2021): Fragility curves at regional basis for unreinforced masonry buildings prone to out-of-plane mechanisms: the case of Central Italy. In: Structures, v. 34 (December 2021).
- (2012): An Application of Damage Detection Methods to A Real World Structure Subjected to Ground Motion Excitation. In: Journal of Civil Engineering and Architecture, v. 6, n. 3 (March 2012).
- (2021): A macro-modelling approach for RC beam-column exterior joints: first results on monotonic behaviour. In: Journal of Building Engineering, v. 39 (July 2021).
- (2018): Numerical Seismic Assessment of Masonry Made of Compressed Earth Blocks. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2021): Influence of geometric imperfections on the efficacy of optimization approaches for grid-shells. In: Engineering Structures, v. 228 (February 2021).
- (2014): A data fusion based approach for damage detection in linear systems. In: Frattura ed Integrità Strutturale, v. 8, n. 29 (July 2014).
- (2018): Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems. In: Frattura ed Integrità Strutturale, v. 13, n. 47 (December 2018).
- (2020): Optimization Strategies for Grid Shells: The Role of Joints. In: Journal of Architectural Engineering (ASCE), v. 26, n. 1 (March 2020).
- (1998): Influence of Material Stiffening on Stability of Elastomeric Bearings at Large Displacements. In: Journal of Engineering Mechanics (ASCE), v. 124, n. 9 (September 1998).
- (1999): Experimental Results on Centrifugated GFRP Poles for Electric Lifelines. In: Journal of Composites for Construction, v. 3, n. 3 (August 1999).
- (2009): Effect of Transverse Steel on the Response of RC Beams Strengthened in Shear by FRP: Experimental Study. In: Journal of Composites for Construction, v. 13, n. 5 (October 2009).
- (2004): Role of Fiber Reinforced Plastic Sheets in Shear Response of Reinforced Concrete Beams: Experimental and Analytical Results. In: Journal of Composites for Construction, v. 8, n. 5 (October 2004).
- (2015): Investigation on the bond behavior of clay bricks reinforced with SRP and SRG strengthening systems. In: Materials and Structures, v. 48, n. 11 (November 2015).
- (2011): A Beam Finite Element for Nonlinear Analysis of Masonry Elements With or Without Fiber-Reinforced Plastic (FRP) Reinforcements. In: International Journal of Architectural Heritage, v. 5, n. 6 (November 2011).
- (2010): Experimental tests and numerical modeling of reinforced masonry arches. In: Engineering Structures, v. 32, n. 3 (March 2010).
- (2014): New York Times Building: Role of Selected Features. In: Journal of Architectural Engineering (ASCE), v. 20, n. 1 (March 2014).
- (2018): Optimization of structural patterns for tall buildings: The case of diagrid. In: Engineering Structures, v. 171 (September 2018).
- (2018): Role of global buckling in the optimization process of grid shells: Design strategies. In: Engineering Structures, v. 156 (February 2018).
- (2014): multi-stage data-fusion procedure for damage detection of linear systems based on modal strain energy. In: Journal of Civil Structural Health Monitoring, v. 4, n. 2 (January 2014).
- (2012): data-driven approach for damage detection: an application to the ASCE steel benchmark structure. In: Journal of Civil Structural Health Monitoring, v. 2, n. 2 (August 2012).
- (2017): Global buckling algorithmic optimization in grid shell design. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae cooperates with
