Kohju Ikago 
- (2024): Device topology optimization for an inerter-based structural dynamic vibration absorber. In: Frontiers in Built Environment, v. 10 (February 2024).
- (2024): Development of low-cost rolling base isolation system for seismic protection of rubble stone masonry buildings in Himalayan Mountain range. In: Frontiers in Built Environment, v. 10 (February 2024).
- (2024): Feasibility of sliding base isolation for rubble stone masonry buildings in the Himalayan Mountain range. In: Frontiers in Built Environment, v. 10 (February 2024).
- (2024): Causal rate-independent damping device using a rotary inerter damper. In: Frontiers in Built Environment, v. 10 (February 2024).
- (2024): Inelastic torsional buckling of simple three-dimensional moment resisting frame. In: Frontiers in Built Environment, v. 10 (February 2024).
- (2024): Modal decomposition of multi-degree-of-freedom structure with non-proportionally distributed rate-independent linear damping. In: Computers & Structures, v. 297 (July 2024).
- (2024): Feasibility of an inerter-based causal rate-independent damping model for the protection of seismically isolated structures. In: Structures, v. 62 (April 2024).
- (2023): Seismic control of base-isolated structures using rate-independent damping devices. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Seismic control of multidegree‐of‐freedom structures using a concentratedly arranged tuned viscous mass damper. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 14 (6 October 2023).
- (2023): Performance Examination of Nonlinear Signal-Based Control in Shake Table Experiments with Sliding Structures. In: Structural Control and Health Monitoring, v. 2023 (February 2023).
- (2023): Seismic response control of core wall structures using tuned viscous mass damper (TVMD) outriggers. In: Engineering Structures, v. 292 (October 2023).
- (2023): Nonlinear signal‐based control for shake table experiments with sliding masses. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 6 (June 2023).
- (2023): Combination of physics‐based and data‐driven modeling for nonlinear structural seismic response prediction through deep residual learning. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 8 (March 2023).
- (2023): Optimal design of negative-stiffness dampers for improved efficiency of structural seismic isolation. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Feasibility study of a practical causal rate-independent damping device for the improved performance of seismic isolated structures. In: Engineering Structures, v. 275 (January 2023).
- (2022): Optimal Design of Nontraditional Tuned Mass Damper for Base-Isolated Building. In: Journal of Earthquake Engineering, v. 27, n. 10 (September 2022).
- (2022): Numerically disturbed shake table experimentation to examine nonlinear signal-based control. In: Frontiers in Built Environment, v. 8 (February 2022).
- (2022): Lead-rubber-bearing with negative stiffness springs (LRB-NS) for base-isolation seismic design of resilient bridges: A theoretical feasibility study. In: Engineering Structures, v. 266 (September 2022).
- (2022): Modified tuned Maxwell–Wiechert model for improving seismic performance of base-isolated structures. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Analytical solutions of H2 control and efficiency‐based design of structural systems equipped with a tuned viscous mass damper. In: Structural Control and Health Monitoring, v. 29, n. 5 (3 April 2022).
- (2022): Performance of a passive rate‐independent damping device in a seismically isolated multistory building. In: Structural Control and Health Monitoring, v. 29, n. 6 (11 April 2022).
- (2022): Experimental study of earthquake input energy of low‐frequency structures equipped with a passive rate‐independent damping device. In: Structural Control and Health Monitoring, v. 29, n. 2 (10 January 2022).
- (2022): Causal implementation of rate-independent linear damping for the seismic protection of low-frequency structures. In: Structures, v. 35 (January 2022).
- (2021): Feasibility study of the physical implementation of rate-independent linear damping for the protection of low-frequency structures. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Feasibility study of a passive rate-independent damping device for the seismic protection of low-frequency structures. In: Structures, v. 34 (December 2021).
- (2020): Damping enhancement principle of inerter system. In: Structural Control and Health Monitoring, v. 27, n. 5 (May 2020).
- (2017): Causal Realization of Rate-Independent Linear Damping for the Protection of Low-Frequency Structures. In: Journal of Engineering Mechanics (ASCE), v. 143, n. 9 (September 2017).
- (2012): Modal Response Characteristics of a Multiple-Degree-Of-Freedom Structure Incorporated with Tuned Viscous Mass Dampers. In: Journal of Asian Architecture and Building Engineering, v. 11, n. 2 (November 2012).
- (2012): Seismic control of single-degree-of-freedom structure using tuned viscous mass damper. In: Earthquake Engineering and Structural Dynamics, v. 41, n. 3 (March 2012).
- (2018): Adaptive causal realization of rate-independent linear damping. In: Engineering Structures, v. 167 (July 2018).
Structurae cooperates with
