Ahmed Ibrahim 
- (2024): Comprehensive Numerical Modeling of Prestressed Girder Bridges under Low-Velocity Impact. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2021): Influence of Shear Span-to-Effective Depth Ratio on Behavior of High-Strength Reinforced Concrete Beams. In: International Journal of Concrete Structures and Materials, v. 15, n. 1 (7 January 2021).
- (2018): Experimental Investigation of Retrofitted Web-Gap Regions in Steel Bridge Girders. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2023): CFD-DEM simulation of sand erosion into defective gravity pipes under constant groundwater table. In: Tunnelling and Underground Space Technology, v. 131 (January 2023).
- (2021): ASR mitigation using binary and ternary blends with waste glass powder. In: Construction and Building Materials, v. 280 (April 2021).
- (2022): Experimental and Numerical Nonlinear Analysis of Hollow RC Beams Reinforced with Rectangular Spiral Stirrups under Torsion. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 6 (August 2022).
- (2022): Investigating Trends and Costs Associated with Designing Concrete Mixes Using Different Methods by Computer Programs. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Experimental study of using Aerogel insulation for residential buildings. In: Advances in Building Energy Research, v. 16, n. 5 (July 2022).
- (2019): Infrastructure procurement capacity gaps in Nigeria public sector institutions. In: Engineering, Construction and Architectural Management, v. 26, n. 9 (September 2019).
- (2019): Behavior of kernelrazzo floor finish in aggressive chloride environment. In: Case Studies in Construction Materials, v. 11 (December 2019).
- (2021): Improving the outlier detection method in concrete mix design by combining the isolation forest and local outlier factor. In: Construction and Building Materials, v. 270 (February 2021).
- (2021): Flexural response of Ultra-High-Performance Concrete (UHPC) hybrid bridge deck connections made with local materials. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Automated Assessment of Building Damage from Seismic Events Using Smartphones. In: Journal of Structural Engineering (ASCE), v. 146, n. 5 (May 2020).
- (2020): Identifying Stick-Slip Characteristics of a Smart Device on a Seismically Excited Surface Using On-Board Sensors. In: Journal of Earthquake Engineering, v. 26, n. 2 (February 2020).
- (2019): Evaluation and upgrading web-gap distortion retrofits in steel girder bridges. In: International Journal of Advanced Structural Engineering, v. 11, n. 3 (29 August 2019).
- : The Feasibility of Using Smart Devices for Quantifying Seismic Damage to Buildings. Presented at: Structures Congress 2017, April 6–8, 2017, Denver, Colorado.
- (2011): Damage Size Prediction of Reinforced Concrete Slabs under Blast Loads Using Artificial Neural Networks. Presented at: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2017): Assessment of the Rotation of Exterior Bridge Girders Due to Construction Loading Using TAEG Software. In: Modern Civil and Structural Engineering, v. 1, n. 1 (October 2017).
- (2019): Feasibility Study on Concrete Performance Made by Partial Replacement of Cement with Nanoglass Powder and Fly Ash. In: International Journal of Civil Engineering, v. 17, n. 7 (July 2019).
- (2016): Effect of mid-thickness rebar mesh on the behavior and punching shear strength of interior slab–column connection. In: HBRC Journal, v. 12, n. 3 (December 2016).
- (2014): Fresh, Mechanical, and Durability Characteristics of Self-Consolidating Concrete Incorporating Recycled Asphalt Pavements. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 4 (April 2014).
- (2014): Experimental study on Portland cement pervious concrete mechanical and hydrological properties. In: Construction and Building Materials, v. 50 (January 2014).
- (2018): Finite-element modeling of UHPC hybrid bridge deck connections. In: International Journal of Advanced Structural Engineering, v. 10, n. 3 (June 2018).
- (2016): Analytical compressive stress–strain model for high-strength concrete confined with cross-spirals. In: Engineering Structures, v. 113 (April 2016).
- (2017): Effectiveness of different bracing systems to prevent exterior girder rotation during bridge deck construction. In: Engineering Structures, v. 142 (July 2017).
- (2016): Distortion-Induced Fatigue Cracking in a Seismically Retrofitted Steel Bridge. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 4 (August 2016).
- (2013): Finite-Element Analysis of Reinforced-Concrete Box Girder Bridges under Close-In Detonations. In: Journal of Performance of Constructed Facilities (ASCE), v. 27, n. 6 (December 2013).
- (2016): Effect of Inconsistent Diaphragms on Exterior Girder Rotation During Overhang Deck Construction. In: Structures, v. 8 (November 2016).
- (2011): Damage Prediction for RC Slabs under Near-Field Blasts Using Artificial Neural Network. In: International Journal of Protective Structures, v. 2, n. 3 (September 2011).
- (2018): Dynamic behavior of a smart device on a surface subjected to earthquake motion. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 9 (25 July 2018).
Structurae cooperates with
