0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

C. Hühne

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Ali, H. Q. / Wagner, H. N. R. / Akalin, C. / Tabrizi, I. E. / Hühne, C. / Yildiz, M. (2023): Buckling And Fracture Analysis Of Thick And Long Composite Cylinders With Cutouts Under Axial Compression: An Experimental And Numerical Campaign. In: Composite Structures, v. 324 (November 2023).

    https://doi.org/10.1016/j.compstruct.2023.117530

  2. Koord, J. / Stüven, J.-L. / Völkerink, O. / Petersen, E. / Hühne, C. (2022): Investigation of exact analytical solutions for composite laminates under pin-bearing loading. In: Composite Structures, v. 292 (July 2022).

    https://doi.org/10.1016/j.compstruct.2022.115605

  3. Koord, J. / Stüven, J.-L. / Petersen, E. / Völkerink, O. / Hühne, C. (2020): Investigation of exact analytical solutions for circular notched composite laminates under tensile loading. In: Composite Structures, v. 243 (July 2020).

    https://doi.org/10.1016/j.compstruct.2020.112180

  4. Düring, Denise / Petersen, E. / Stefaniak, D. / Hühne, C. (2020): Damage resistance and low-velocity impact behaviour of hybrid composite laminates with multiple thin steel and elastomer layers. In: Composite Structures, v. 238 (April 2020).

    https://doi.org/10.1016/j.compstruct.2019.111851

  5. Wagner, H. N. R. / Petersen, E. / Khakimova, R. / Hühne, C. (2019): Buckling analysis of an imperfection-insensitive hybrid composite cylinder under axial compression – numerical simulation, destructive and non-destructive experimental testing. In: Composite Structures, v. 225 (October 2019).

    https://doi.org/10.1016/j.compstruct.2019.111152

  6. Wagner, H. N. R. / Köke, H. / Dähne, S. / Niemann, S. / Hühne, C. / Khakimova, R. (2019): Decision tree-based machine learning to optimize the laminate stacking of composite cylinders for maximum buckling load and minimum imperfection sensitivity. In: Composite Structures, v. 220 (July 2019).

    https://doi.org/10.1016/j.compstruct.2019.02.103

  7. Petersen, E. / Stefaniak, D. / Hühne, C. (2017): Experimental investigation of load carrying mechanisms and failure phenomena in the transition zone of locally metal reinforced joining areas. In: Composite Structures, v. 182 (December 2017).

    https://doi.org/10.1016/j.compstruct.2017.09.002

  8. Wagner, H. N. R. / Hühne, C. / Niemann, S. (2017): Robust knockdown factors for the design of axially loaded cylindrical and conical composite shells – Development and Validation. In: Composite Structures, v. 173 (August 2017).

    https://doi.org/10.1016/j.compstruct.2017.02.031

  9. Niemann, S. / Wagner, R. / Beerhorst, M. / Hühne, C. (2017): Testing and analysis of Anisogrid Prepreg element specimens under uniaxial tension and compression. In: Composite Structures, v. 160 (January 2017).

    https://doi.org/10.1016/j.compstruct.2016.10.100

  10. Wagner, H. N. R. / Hühne, C. / Rohwer, K. / Niemann, S. / Wiedemann, M. (2017): Stimulating the realistic worst case buckling scenario of axially compressed unstiffened cylindrical composite shells. In: Composite Structures, v. 160 (January 2017).

    https://doi.org/10.1016/j.compstruct.2016.10.108

  11. Beerhorst, M. / Hühne, C. (2016): Optimization of axially compressed cylindrical grid structures using analytical and numerical models. In: Composite Structures, v. 157 (December 2016).

    https://doi.org/10.1016/j.compstruct.2016.08.022

  12. Wagner, H. N. R. / Hühne, C. / Niemann, S. (2016): Constant single-buckle imperfection principle to determine a lower bound for the buckling load of unstiffened composite cylinders under axial compression. In: Composite Structures, v. 139 (April 2016).

    https://doi.org/10.1016/j.compstruct.2015.11.047

  13. Düring, D. / Weiß, L. / Stefaniak, D. / Jordan, N. / Hühne, C. (2015): Low-velocity impact response of composite laminates with steel and elastomer protective layer. In: Composite Structures, v. 134 (December 2015).

    https://doi.org/10.1016/j.compstruct.2015.08.001

  14. Weiß, L. / Hühne, C. (2015): Experimental investigation on the deformation of CFRP cylinders using piezo-actuators. In: Composite Structures, v. 132 (November 2015).

    https://doi.org/10.1016/j.compstruct.2015.07.002

  15. Kappel, E. / Stefaniak, D. / Hühne, C. (2013): Process distortions in prepreg manufacturing – An experimental study on CFRP L-profiles. In: Composite Structures, v. 106 (December 2013).

    https://doi.org/10.1016/j.compstruct.2013.07.020

  16. Löbel, T. / Kolesnikov, B. / Scheffler, S. / Stahl, A. / Hühne, C. (2013): Enhanced tensile strength of composite joints by using staple-like pins: Working principles and experimental validation. In: Composite Structures, v. 106 (December 2013).

    https://doi.org/10.1016/j.compstruct.2013.06.020

  17. Hühne, C. / Zerbst, A.-K. / Kuhlmann, G. / Steenbock, C. / Rolfes, R. (2010): Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models. In: Composite Structures, v. 92, n. 2 (January 2010).

    https://doi.org/10.1016/j.compstruct.2009.05.011

  18. Völkerink, O. / Petersen, E. / Koord, J. / Hühne, C. (2020): A pragmatic approach for a 3D material model considering elasto-plastic behaviour, damage initiation by Puck or Cuntze and progressive failure of fibre-reinforced plastics. In: Computers & Structures, v. 236 (August 2020).

    https://doi.org/10.1016/j.compstruc.2020.106280

  19. Hühne, C. / Rolfes, R. / Breitbach, E. / Teßmer, J. (2008): Robust design of composite cylindrical shells under axial compression — Simulation and validation. In: Thin-Walled Structures, v. 46, n. 7-9 (July 2008).

    https://doi.org/10.1016/j.tws.2008.01.043

  20. Gramüller, B. / Boblenz, J. / Hühne, C. (2014): PACS—Realization of an adaptive concept using pressure actuated cellular structures. In: Smart Materials and Structures, v. 23, n. 11 (November 2014).

    https://doi.org/10.1088/0964-1726/23/11/115006

  21. Gramüller, B. / Köke, H. / Hühne, C. (2015): Holistic design and implementation of pressure actuated cellular structures. In: Smart Materials and Structures, v. 24, n. 12 (December 2015).

    https://doi.org/10.1088/0964-1726/24/12/125027

  22. Gramüller, B. / Tempel, A. / Hühne, C. (2015): Shape-variable seals for pressure actuated cellular structures. In: Smart Materials and Structures, v. 24, n. 9 (September 2015).

    https://doi.org/10.1088/0964-1726/24/9/095005

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine