Ying Huang 
- (2024): Effect of SAP on the properties and microstructure of cement-based materials in the low humidity environment. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): The leaching-deterioration properties and leaching mechanism of cement mortar under dry-wet cycles. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Construction defect identification for structural sealant by statistical driving-point accelerance. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Experimental study on combined effect of mechanical loads and corrosion using tube-packaged long-gauge fiber Bragg grating sensors. In: Structural Health Monitoring, v. 22, n. 6 (April 2023).
- (2023): Carbon nanotube (CNT) reinforced cementitious composites using carboxymethyl cellulose (CMC) treatment for enhanced dispersion, mechanical, and piezoresistive properties. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): Effect of ultra-fine limestone powder on leaching resistance of cement mortar. In: Construction and Building Materials, v. 368 (March 2023).
- (2023): Condition-based monitoring as a robust strategy towards sustainable and resilient multi-energy infrastructure systems. In: Sustainable and Resilient Infrastructure, v. 8 (June 2023).
- (2022): Effects of carbon nanotube (CNT) geometries on the dispersion characterizations and adhesion properties of CNT reinforced epoxy composites. In: Composite Structures, v. 296 (September 2022).
- (2022): Analysis of Rational Finite Element Model of Two-Span Skew Girder Bridge Based on Shaking Table Test. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2016): Concrete pavement monitoring with PPP-BOTDA distributed strain and crack sensors. In: Smart Structures and Systems, v. 18, n. 3 (September 2016).
- (2022): A cost-benefit analysis of the combined cooling and heating system from the economic perspective: A case study from Hefei, China. In: Energy and Buildings, v. 255 (January 2022).
- (2021): Detection, visualization, quantification, and warning of pipe corrosion using distributed fiber optic sensors. In: Automation in Construction, v. 132 (December 2021).
- (2014): Glass fiber–reinforced polymer–packaged fiber Bragg grating sensors for ultra-thin unbonded concrete overlay monitoring. In: Structural Health Monitoring, v. 14, n. 1 (September 2014).
- (2019): Hysteretic performance of CHS steel members under cyclically fluctuating axial loads and lateral displacement. In: Engineering Structures, v. 199 (November 2019).
- (2014): Elastic flexural and torsional buckling behavior of pre-twisted bar under axial load. In: Structural Engineering and Mechanics, v. 49, n. 2 (January 2014).
- (2016): The finite element model research of the pre-twisted thin-walled beam. In: Structural Engineering and Mechanics, v. 57, n. 3 (February 2016).
- (2011): Building-integrated photovoltaics (BIPV) in architectural design in China. In: Energy and Buildings, v. 43, n. 12 (December 2011).
- (2021): 3D Continuous Copper Networks Coated with Graphene in Al-matrix Composites for Efficient Thermal Management. In: Composite Structures, v. 258 (February 2021).
- (2020): Dynamic progressive collapse of steel moment frames under different fire scenarios. In: Journal of Constructional Steel Research, v. 173 (October 2020).
- (2020): Internal crack detection in concrete pavement using discrete strain sensors. In: Journal of Civil Structural Health Monitoring, v. 10, n. 2 (March 2020).
- (2014): Design and practical application of an innovative net-zero energy house with integrated photovoltaics: a case study from Solar Decathlon China 2013. In: Architectural Science Review, v. 58, n. 2 (June 2014).
- (2019): A constrained cylinder model of strain transfer for packaged fiber Bragg grating sensors embedded in inelastic medium. In: Structural Control and Health Monitoring, v. 26, n. 5 (April 2019).
- (2016): An evaluation method to predict progressive collapse resistance of steel frame structures. In: Journal of Constructional Steel Research, v. 122 (July 2016).
- (2013): Hybrid Fibre Optic Sensor Network for Real-time High Temperature Performance Monitoring of Steel Structures. In: American Journal of Civil Engineering, v. 1, n. 1 ( 2013).
- (2019): Highly sensitive flexible strain sensor based on threadlike spandex substrate coating with conductive nanocomposites for wearable electronic skin. In: Smart Materials and Structures, v. 28, n. 3 (March 2019).
- (2017): Flexible and reversibly deformable radio-frequency antenna based on stretchable SWCNTs/PANI/Lycra conductive fabric. In: Smart Materials and Structures, v. 26, n. 10 (October 2017).
- (2017): Highly stretchable strain sensor based on SWCNTs/CB synergistic conductive network for wearable human-activity monitoring and recognition. In: Smart Materials and Structures, v. 26, n. 9 (September 2017).
- (2013): Large-strain optical fiber sensing and real-time FEM updating of steel structures under the high temperature effect. In: Smart Materials and Structures, v. 22, n. 1 (January 2013).
- (2013): Long period fiber grating sensors coated with nano iron/silica particles for corrosion monitoring. In: Smart Materials and Structures, v. 22, n. 7 (July 2013).
- (2018): Highly stretchable strain sensor based on polyurethane substrate using hydrogen bond-assisted laminated structure for monitoring of tiny human motions. In: Smart Materials and Structures, v. 27, n. 3 (March 2018).
Structurae cooperates with
