Shifeng Huang 
- (2024): The effect of extensive heat exposure on the mechanical properties of polymer-modified sulfoaluminate cement repair mortar. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Chinese raw vermiculite: A potential additive for improving the thermal properties of calcium sulfoaluminate cement-blended mortars for applications in hot regions. In: Journal of Building Engineering, v. 92 (September 2024).
- (2024): Active and passive monitoring of corrosion state of reinforced concrete based on embedded cement-based acoustic emission sensor. In: Journal of Building Engineering, v. 89 (July 2024).
- (2023): Application of titanium gypsum as raw materials in cement-based self-leveling mortars. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2022): Influence of Propagation Distance on Characteristic Parameters of Acoustic Emission Signals in Concrete Materials Based on Low-Frequency Sensor. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Monitoring the damage evolution of reinforced concrete during tunnel boring machine hoisting by acoustic emission. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): The Impact of Extended Heat Exposure on Rapid Sulphoaluminate Cement Concrete Up To 120°C. In: Periodica Polytechnica Civil Engineering, v. 65, n. 2 ( 2021).
- (2016): Design and properties of Gaussian-type 1–3 piezoelectric composites. In: Composite Structures, v. 140 (April 2016).
- (2020): SiO2/TiO2 composite powders deposited on cement-based materials: Rhodamine B removal and the bonding mechanism. In: Construction and Building Materials, v. 241 (April 2020).
- (2018): Environmental resistance of cement concrete modified with low dosage nano particles. In: Construction and Building Materials, v. 164 (March 2018).
- (2009): Embedded Piezo-Transducer in Concrete for Property Diagnosis. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 11 (November 2009).
- (2010): Identifying technology for structural damage based on the impedance analysis of piezoelectric sensor. In: Construction and Building Materials, v. 24, n. 12 (December 2010).
- (2014): Electromechanical impedance spectra investigation of impedance-based PZT and cement/polymer based piezoelectric composite sensors. In: Construction and Building Materials, v. 65 (August 2014).
- (2015): Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures. In: Construction and Building Materials, v. 76 (February 2015).
- (2015): Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements. In: Construction and Building Materials, v. 101 (December 2015).
- (2017): Assessment of corrosion of reinforcing steel bars in concrete using embedded piezoelectric transducers based on ultrasonic wave. In: Construction and Building Materials, v. 151 (October 2017).
- (2004): Piezoelectric properties of 0-3 PZT/sulfoaluminate cement composites. In: Smart Materials and Structures, v. 13, n. 2 (April 2004).
- (2009): The application of 1–3 cement-based piezoelectric transducers in active and passive health monitoring for concrete structures. In: Smart Materials and Structures, v. 18, n. 9 (September 2009).
- (2007): An investigation on 1–3 cement based piezoelectric composites. In: Smart Materials and Structures, v. 16, n. 4 (August 2007).
- (2005): Dielectric and piezoelectric properties of piezoelectric ceramic–sulphoaluminate cement composites. In: Smart Materials and Structures, v. 14, n. 5 (October 2005).
Structurae cooperates with
