Baoshan Huang 
- (2024): Discussion of “Investigation of Adhesion Property between Asphalt Binder and Aggregate Using Modified Boiling Methods for Hot and Wet Area”. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (March 2024).
- (2004): Development of waste tire modified concrete. In: Cement and Concrete Research, v. 34, n. 12 (December 2004).
- (2022): Binder availability and blending efficiency of reclaimed asphalt: A state-of-the-art review. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Dispersion, compatibility, and rheological properties of graphene-modified asphalt binders. In: Construction and Building Materials, v. 350 (October 2022).
- (2021): Cementless controlled low-strength material (CLSM) based on waste glass powder and hydrated lime: Synthesis, characterization and thermodynamic simulation. In: Construction and Building Materials, v. 275 (March 2021).
- (2021): Effect of granulated phosphorus slag on physical, mechanical and microstructural characteristics of Class F fly ash based geopolymer. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): 3D Multiscale Modeling of Asphalt Pavement Responses under Coupled Temperature–Stress Fields. In: Journal of Engineering Mechanics (ASCE), v. 148, n. 3 (March 2022).
- (2022): Characterization of Shear Resistance of Interlayer between Concrete Bridge Deck and Asphalt Concrete Overlay Utilizing Inclination Shear Test. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 2 (February 2022).
- (2013): Analyzing Influence Factors of Transverse Cracking on LTPP Resurfaced Asphalt Pavements through NB and ZINB Models. In: Journal of Transportation Engineering, v. 139, n. 9 (September 2013).
- (2013): Cost-Effectiveness Analyses of Maintenance Treatments for Low- and Moderate-Traffic Asphalt Pavements in Tennessee. In: Journal of Transportation Engineering, v. 139, n. 8 (August 2013).
- (2015): Calibration and Application of Treatment Performance Models in a Pavement Management System in Tennessee. In: Journal of Transportation Engineering, v. 141, n. 2 (February 2015).
- (2007): Analytical Modeling of Three-Layered HMA Mixtures. In: International Journal of Geomechanics, v. 7, n. 2 (March 2007).
- (2021): Compatibility and rheological characterization of asphalt modified with recycled rubber-plastic blends. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Analysis of critical factors to asphalt overlay performance using gradient boosted models. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Civil Engineering Materials for Climate Adaptation and Sustainability. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (May 2020).
- (2018): Assessment of compaction quality of multi-layer pavement structure based on intelligent compaction technology. In: Construction and Building Materials, v. 161 (February 2018).
- (2018): Blending efficiency evaluation of plant asphalt mixtures using fluorescence microscopy. In: Construction and Building Materials, v. 161 (February 2018).
- (2015): DEM Simulation of Laboratory Compaction of Asphalt Mixtures Using an Open Source Code. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 3 (March 2015).
- (2013): Air-Void Distribution Analysis of Asphalt Mixture Using Discrete Element Method. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 10 (October 2013).
- (2014): Characterizing Fatigue Behavior of Asphalt Mixtures Utilizing Loaded Wheel Tester. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 1 (January 2014).
- (2008): Dynamic Modulus Prediction of HMA Mixtures Based on the Viscoelastic Micromechanical Model. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 8 (August 2008).
- (2014): Characterizing Rheological Properties of Binder and Blending Efficiency of Asphalt Paving Mixtures Containing RAS through GPC. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 5 (May 2014).
- (2019): Direct shear properties of railway ballast mixed with tire derived aggregates: Experimental and numerical investigations. In: Construction and Building Materials, v. 200 (March 2019).
- (2013): Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement. In: Construction and Building Materials, v. 44 (July 2013).
- (2015): Characterization of asphalt concrete linear viscoelastic behavior utilizing Havriliak–Negami complex modulus model. In: Construction and Building Materials, v. 99 (November 2015).
- (2016): Characterizing rheological behavior of asphalt binder over a complete range of pavement service loading frequency and temperature. In: Construction and Building Materials, v. 123 (October 2016).
- (2016): Characterizing blending efficiency of plant produced asphalt paving mixtures containing high RAP. In: Construction and Building Materials, v. 126 (November 2016).
- (2016): Comparative investigation into field performance of steel bridge deck asphalt overlay systems. In: KSCE Journal of Civil Engineering, v. 20, n. 7 (January 2016).
- (2017): Characterization of Triaxial Stress State Linear Viscoelastic Behavior of Asphalt Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 4 (April 2017).
- (2004): Application of a Temperature Dependent Viscoplastic Hierarchical Single Surface Model for Asphalt Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 16, n. 2 (April 2004).
Structurae cooperates with
